What to do if the printer not taking the paper

To Have a home printing technique convenient. But sometimes it happens in a variety of ways which the device ceases to perform its functions. One of the common problems – the printer captures the paper. What to do in this case and how to figure out what the problem is without resorting to a service center?

Health Check

If the Epson printer does not grip the paper (as well as any other company), the first thing you need to figure out whether to rotate the rollers responsible for this action. It is possible that the problem lies in this. To check enough to send any document to print and listen to the sounds, which publishes the device. After the rumble of the carriage that moves the print cartridge to hear the rumble of the rotating axis.

You can Also see that the platform begins “serve” sheets. If this happened – all great, was not a failure, the mechanical parts are intact, contacts are working. If not, then all further action is likely to be meaningless. Regardless, why doesn't the printer grabs the paper, Samsung, Canon and other manufacturers are advised to contact the service center, because many modern models can be yourself only to remove foreign objects.

Garbage in

One of the most frequent causes of refusal of work – of getting into the paper tray of various small and big items. This is the reason why the printer grabs the paper, characteristic for devices with vertical loading. Often, especially near the rollers can be detected stationary. Not only the pen or lipstick, but even a small object like a paper clip or bracket, the forgotten sheet that can prevent the seizure of the paper. So you need to carefully examine the tray. It is likely that the problem is hidden there.

How to get out of "Skype" on the "Android" and not only

How to get out of "Skype" "Android"? This question bothers many users. The thing is that the messenger is not so difficult. But there are features that are only for mobile versions. To log out of Skype in this case more difficult than it seems. But i...

Kingo ROOT: how to use the program to gain administrative rights on Android

The Gadgets on the platform Android regained the lion's share of the market. Developers are continually perfecting the OS, trying to fit the needs of the users, but from year to year admit palpable mistake: forbid the owner to "stuffing" of his gadge...

How to get from Stormwind to Tanaris: practical tips

World of Warcraft is an iconic MMORPG, uniting millions of players around the world. There are many locations and puzzles, secret trails and larger, but rather dangerous paths. Sooner or later, every player chose the side of the Alliance, we have to ...

If the foreign body is detected, it is necessary to try it out. There are two options. First – with the help of long tweezers, gently slipping over the edge. Second – a technique to turn and gently shake. Only it should be done carefully and not for long, because the subject may fall even further or the printer will not withstand such treatment.

Pollution video

Office Equipment – delicate thing, it is sensitive to different contaminants: dust, fly toner and ink etc. it's possible that that is why the printer grabs the paper. Xerox, HP and other manufacturers warn that in the case of self-repair warranty expires. If her period has passed, and the design of the printer allows access to the rollers, it is possible to clean them yourself. If not – it is better to take the device to authorized service facility for service.

The cleaning Procedure is simple. Will need a soft cloth and cleaning fluid. The latter sometimes replaced by the lighter fluid. Rags it is advisable to take light, so it will be easier to control the cleaning process. It should not leave pile, otherwise the whole procedure would be meaningless. A rag moistened with liquid and wipe the rollers until, until the last traces of dirt, dust, caramel. The cloth can also be replaced with special wipes. They do not leave lint and well remove dirt.

Loss of flexibility

The Printer grabs the paper, if the rollers are soft enough. They are made of rubber, and it is no secret that over time it becomes hard. In this case, you need to act like the previous item, only instead of the cleansing fluid you need to use a dry shampoo. For some time it will return to the life of the printer, but sooner or later, to change the rollers still have. By the way, there are tools that combine two functions: the cleaning and restoration.

Worn rollers

This is Probably the most complex case, because there is only one 100% effective means – replacement of aged parts. If for this reason, the printer grabs the paper, it is better to take the equipment in for repair. However, if for any reason there is no possibility to take the device to service center and wait until it fixed, you can try to return it to working condition. There are two options:

1. Offset roller. In some devices no longer works, only that portion that faces the tray. The opposite is practically not loaded. As a result, the roller wear unevenly. So you can try to flip it so that the intact and the damaged parts were swapped.
2. The Increase in diameter. If the roller is evenly worn on all sides, you will have to remove it off the shaft and wrap electrical tape or duct tape. Enough for 2-3 turns, no longer need, because then the diameter will be too large. After this makeshift repair video you need to put back.

Both of these techniques are not always possible to use. And even less can they be effective. In addition, over time the rollers will still have to change. The printer can be, and will grab the paper, but after a time or uneven. And a few months later will still fail. Therefore, it is better to replace worn parts.