How to do epoxy flooring for garage with your own hands?

Date:

2018-03-20 22:53:12

Views:

471

Rating:

1Like 0Dislike

Share:

Table of contents:

Its name shall self-leveling floor technology device. This embodiment of the screed with pouring self-leveling mixture. As distinctive features of self-leveling floor cement-based stands thickness, which is equal to about 3.5 mm. Sometimes this coverage is liquid linoleum, the surface after drying is perfectly flat and smooth, only seams, as in the case of tiles, based on the no. This floor can be used not only in public, but in a residential area, it is characterized by environmental friendliness, ease of installation and operation. Epoxy floor for garage based on cement is considered to be the best solution for creating designs, which will be heating.

The mix

epoxy floor garage

When mixing mortar for floor for garage on a cement basis used fractional sand, polymer fillers, cements, and mineral supplements. Superb quality characteristics of different mixtures, the ingredients of which are no additives. But for samorastekayuschiysya billing is necessary to add a large amount of fluid. This could cause reduce the strength of the structure. To solve this problem by adding polymers. When consumers want to equip self-leveling floors for the garage, they often choose between organic compounds and cement-based. Preference in most cases given to the latter, in particular because the cost of this product is much lower.

Technology installation

epoxy floor garage with his own hands

If you want to perform self-leveling floor for the garage with your hands, you should initial get acquainted with the technology of the work, which involves several stages. Preparation involves cleaning the surface, not only the floor but also the walls from dirt and dust. In the next phase, the master have to beat on the walls of the line, which will determine the future level of the floor. It is glued polystyrene tape with an adhesive surface, which has a spongy structure. The width of the buffer strips will correspond to the thickness of the poured floor. If you find that the adhered tape was the inaccuracies, the elements projecting beyond the edge of the band must be hidden under the baseboard.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Padding

epoxy floor for garage based on cement

When equipped with cement self-leveling floor for the garage, the next phase on the surface of the primer, it can be done with a spray gun, brush or roller. Be sure to handle all the roughness and cracks. The primer dries in approximately 30 minutes, to enhance the effect of the procedure can be repeated up to 2 times, it will get wet Shine. Special attention should be given to the surface, which was operated for several years and has a loose structure. If we are talking about new concrete surfaces, a primer can be applied in a single layer. In the darkening of the composition at the time of application or foaming should count on a longer drying time, which is caused by high humidity levels in the room. In this case, the surface must be left for a period of 6 to 24 hours.

What else should I know about the stage of preparation

epoxy flooring for garage photo

If you will settle for self-leveling floor garage, after drying the primer composition to begin setting the beacons, it is especially important in those areas which have an impressive square. This is necessary because the application of a cement composition may be difficult. Beacons allows you to divide the surface into separate segments, by pouring the composition in stages. Solution for the floor you will need to prepare before installation of the beacons, it will immediately proceed to the execution of the fill. The height of beacons should be equal to the planned thickness of the floor. In the presence of a smooth surface as lighthouses, you can use the screws that are screwed into the floor in increments of 1 meter from each other. You need to arrange them in a checkerboard pattern. In the presence of sex differences from 3 inches and more in the role of beacons should be the use of steel angles, which are fixed in floor in cement or plaster solution. The correct installation should be checked with a level, following a horizontal line.

Advice

epoxy flooring for garage reviews

Self-Leveling floors for the garage, a photo of which you can see in the article, looks very attractive. But if you want to get a positive result, you should know about some of the nuances of the work. For example, if you have the room an imposing square need to resort to another method of installation of the beacons. To do this, use a levelling layer of great thickness. Beacons can be the same screws that are screwed into the base. But on the walls at the height of the caps should do labels. The horizontal lines should be checked using a level, then pulling thin wire. You can then begin to fill the floor.

Preparation of levelling compound

screedfor garage cement-based photo

If you decide to equip epoxy floor for garage reviews, it is recommended to read in advance. In addition, it is important to read the instructions provided by the manufacturer. In the prepared receptacle to pour water vsypav the contents of the package. To a solution do not add foreign material. In order to achieve homogeneity of the mixture, use a drill or mixer construction. Once the mixture reaches a smooth consistency, leave it for a few minutes and then stir again. Experts advise not to set a high speed mixer or a drill, more than the quality of the mixture will be able to, stirring it at low speed.

Holding of fill

epoxy flooring for garage thickness of the layer

Self-Leveling floor for garage based on cement must be poured half an hour, during this time, the solution will not lose its performance. Therefore, to begin the work necessary, enlisting the help of others. If this is not possible, to prepare the solution needed in the amount that will be able to produce within the specified time. The prepared solution should be poured onto the surface, and after leveling with a roller. A large room should be divided into several sections, filling them gradually. After pouring the Foundation should be treated with a special roller with needles, this will eliminate the bubbles and ensure good adhesion. To move on the wet floor in shoes with spikes or shoes that has metal plates. Dry mix will be approximately 6 hours time you will be able to read the instructions on the package.

What is floor for garage

Self-Leveling floors for the garage on cement base, photos of which you can see in the article is suitable for such conditions is. However, the modern market there are many mixtures that have defined characteristics. For example, if the garage you are working with chemicals, suitable coating of epoxy resins, which is less sensitive to humidity and temperature extremes. This distinguishes such compositions from polyurethane. Among other things, the surface will have excellent decorative qualities and is suitable for use with acids and alkalis. If the garage you wash the car, then a solution of epoxy resins will form a firm coating that will differ tonkosloinoi. If you decide to equip epoxy floor for the garage, which is better, you have to decide before visiting the store. Lately very popular blend of the methyl methacrylate resins. They can be mounted in those areas where it is possible to ensure sufficient air circulation while drying, the solution is to allocate a specific smell.

Quite often compare epoxy flooring with polyurethane, which have high elasticity, durability and resistance to vibration loads.

Reference

To Apply such compositions to wood or metal, and also metal surface. Acrylic cement solutions are the budget option, which allows to eliminate small errors draft coverage. This floor is an alternative to the finishing screed.

Coating Thickness

Self-Leveling floors for the garage, the layer thickness of which can vary depending on the intensity of the loads, quite often settling home masters of their own. No doubt, to lay flooring in a minimum thickness value is not a real problem, but the magnitude of the layer should be 1 to 1.5 millimeters over the bumps and roughness. Most versatile for use on floors are polymer and calcemento basis. The latter option does not provide for pre-alignment surface and apply it on a concrete Foundation without the dry mix. Such solutions have excellent performance, you can use them for 30 years, moreover, they are highly resistant to abrasion. The thickness of such screed can vary from 1 to 2 centimeters. Polymer self-levelling floors are a mixture that is stacked with a thickness of 2 to 4 centimeters. If you intend to build a multi-layered structure on the basis of polymer solutions, the thickness of the layer may be equal to 8 centimeters at least, while the maximum rate is equal to 10 centimeters.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/1508-yak-zrab-c-nal-ny-padlogu-dlya-garazha-sva-m-rukam.html

DE: https://tostpost.com/de/gem-tlichkeit/1505-wie-man-estrich-f-r-die-garage-mit-ihren-h-nden.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/1510-c-mo-hacer-que-la-boca-de-suelo-para-el-garaje-de-sus-manos.html

KK: https://tostpost.com/kk/domashniy-uyut/1508-alay-nalivnoy-pol-sh-n-garazh-z-oldarymen.html

PL: https://tostpost.com/pl/komfort-domu/1511-jak-zrobi-jastrych-do-gara-u-w-asnymi-r-kami.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/1508-como-fazer-o-bocal-de-g-nero-para-a-garagem-com-suas-pr-prias-m-os.html

TR: https://tostpost.com/tr/domashniy-uyut/1514-nas-l-kendili-inden-yay-lan-zemin-i-in-garaj-elleriyle.html

UK: https://tostpost.com/uk/domashn-y-zatishok/1510-yak-zrobiti-nalivnu-p-dlogu-dlya-garazha-svo-mi-rukami.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Ceramic heating panels: photo and reviews

Ceramic heating panels: photo and reviews

Ceramic heating panel – is a modern alternative to classical radiators. Heat transfer is carried out using electricity or water, and the panel itself can be placed in a suspended ceiling, on the floor and on the walls.Device...

Polyurethane foam: the harm to health. Properties of polyurethane foam

Polyurethane foam: the harm to health. Properties of polyurethane foam

Modern construction market is ready to offer its customers as the materials having used for many years and a strong reputation and a long list of polymers came on the market not so long ago and yet only gaining the recognition of ...

Garden flower gelenium – planting and care

Garden flower gelenium – planting and care

There are many beautiful flowers that adorn the garden plots, but there is one that is recognized as a garden favourite in Europe. It's like the sun, bright and beautiful gelenium. The flower is well known to gardeners. It is unpr...

Installation of radiator: rules, features and recommendations

Installation of radiator: rules, features and recommendations

the house was warm, need to properly mount a heating system. It may have a different design. But the main guide heating system – batteries, gives off heat. At first glance it seems that the installation and connection of rad...

Electric stapler: reviews of manufacturers

Electric stapler: reviews of manufacturers

has long been a staple gun has become the essential tool in the Arsenal of the masters, and it is not dependent upon his occupation. In the sale today, you can find furniture of different kinds, they can be electrical or mechanica...

Silicate block: characteristics, uses and reviews

Silicate block: characteristics, uses and reviews

One of the oldest used in the construction materials that used by people for many centuries, is a brick. Since ancient times the method of its production practically has not changed, but today this material-one of the most used in...