What determines the stability of the structure. Calculation. Buckling

Date:

2018-03-20 23:25:15

Views:

617

Rating:

1Like 0Dislike

Share:

Table of contents:

The Construction of different objects of person is always. Erected structures must be strong and durable. For this you need to ensure the stability of the structure. Read about it in this article.

What is sustainability?

It is the ability of the structure or its separate elements to maintain one of two States: balance or movement in time when exposed to small disturbances. In other words, the ability, which still form the original or design position is called resistance.

Stability

Volatility-ability of a design, characterized by obtaining a large displacement with a slight hesitation.

Buckling

This phenomenon is very dangerous for the structure as a whole and for its separate elements in particular. If the design of the steady state goes unstable, this phenomenon is called buckling. Is that the reason for collapse design and construction, must be sought not in violation of their strength. It happens when there is a loss of stability of the structure. Known cases when from-for it destroyed the whole building. The reason for this major catastrophe can be the buckling of individual elements.

Causes of loss of stability

The Stability of structures and structures tend to lose the sheet elements, as they have the ability to shrink. Therefore, before their use is necessary to determine whether or not to lose the stability of the subassemblies after the welding. If this is not done, the compressive stress remaining after welding may be the reason why the steel-plate welded structural elements lose stability.

Recommended

"Knowledge is light and ignorance is darkness": the value, meaning and alternatives

There are some sayings that would seem to need no explanation, such as “teaching & ndash; light and ignorance – darkness”. But some still do not understand their meaning. But not only for such people is written by our article. I...

What was invented by Mendeleev for the army. The history and fate of the invention

What was invented by Mendeleev for the army. The history and fate of the invention

D. I. Mendeleev was a brilliant Russian scientist-polymath, who made many important discoveries in various fields of science and technology. Many people know that he is the author of “Fundamentals of chemistry" and the periodic law of chem...

The origin of the Slavs. The influence of different cultures

The origin of the Slavs. The influence of different cultures

Slavs (under this name), according to some researchers, appeared in the story only in 6 century ad. However, the language of nationality bears the archaic features of the Indo-European community. This, in turn, suggests that the origin of the Slavs h...

The structural Elements have the initial form of equilibrium. If the resistance of building structures is lost, and the balance of elements is broken, and it entails the loss of their working capacity and subsequently leads to crash of the whole structure. The practice of building many such cases.

buckling of structures

To the Viscoelastic elements in the structures, tend to deform and SAG. Such features are called time functions. In this context, structural stability is divided into instantaneous and long lasting. Therefore, the requirements for elements of construction, in addition to its mass, the load, specify the period of operation.

The Loss of stability may occur due to compressive stresses in structural members. This is true for aircraft with supersonic speed, as the hull of the spacecraft is heated unequally. This leads to uneven temperature distribution.

The stability of the structure is disturbed when subjected to critical loads. In most cases this leads to its destruction. It is therefore very important in the construction of buildings to do structural analysis on the stability, not only on the strength of elements and nodes.

Local sustainability

It is resistance of the construction elements. If they are buckling as the result of exposure to stress compressive or shear in nature, about the phenomenon say there is a loss of local stability.

The strength of the structure decreases when the loss of stability of the wall. If it is near the backbone, it affects the shear stress. Under its influence, the wall warps. In the shortened diagonals it is compressed and elongated-in the sky. Occurs swelling wall, the formation of waves. To prevent this phenomenon it is possible by installing vertical stiffeners. They will cross the swollen places, straightening the wall.

Strength design

The stability of the structure, namely the walls and waist can be lost not only from shear stresses. They marginally affect the wall of the middle of the beam, here it is affected by the normal stresses, which can be a loss of stability of the structure.

Structural analysis

The Aim of calculation is to ensure the specified operating conditions of a design with respect for its strength and minimal costs. The calculation takes into account impact force and other influences on the structure of the given limit States, which are divided into two groups. First – when lost bearing capacity of the structure or it is completely unusable; the second – when the normal operation of facilities is difficult.

Impact loading

During operation, any design is experiencing some load and impact on her. For the whole of the structure affects the nature, duration and nature of impacts. They determine the stability of the structure.

Calculation of constructions on stability

Loads are:

  • The weight of the structure itself.
  • Weight of equipment, people, materials, pressure of gases and liquids.
  • Loads of atmospheric – wind, snow, ice.
  • Temperature and seismic actions.
  • Biological (process of decay), chemical (corrosion phenomena), radiative forcing, which changes propertiesmaterials. This affects the life of the structure.
  • Load emergency that arise if violated the technological process, breakdown of machinery, power lines, etc.

Buildings of reinforced concrete structures

Concrete – a complex construction material, which includes concrete and steel. Using the natural properties of substances, the material that is able to perceive the efforts of the compressive and tensile nature.

Concrete structures

Reinforced Concrete structures used in construction as the basic structure. They have high strength, durability, resistance. For their production you can use the building materials of the area, they are simple in the formation of the desired shapes, do not require large expenditures.

Reinforced Concrete structures have several disadvantages. They have high density, high heat and sound conductivity. The shrinkage of design and power exposure over time can cause cracks.

Prefabricated structures of reinforced concrete

The Structures and elements of concrete are monolithic and prefabricated. Monolithic is produced directly on the construction site, and the teams – in factories using special equipment. The special group of distinguished constructions with external reinforcement profiles made of metal.

Building structures

Design of reinforced concrete, manufactured in the factory, used for construction of various premises, landscaping, manufacture of pipes, piles, sleepers, poles for power lines and more.

Monolithic reinforced concrete structures (containers) used for the construction of hydraulic structures, transport and underground construction, low-rise and high-rise construction of residential houses and administrative buildings.

Advantages and disadvantages

Prefabricated building structures have a distinct advantage - their production is made in factories with special equipment. Due to this reduced production time of manufactured structures, and increases their quality. To manufacture prestressed reinforced concrete structure is only possible in the factory.

Building Construction is not so perfect. Their disadvantage is that releasing them in a wide range impossible. This applies, first and foremost, a variety of forms. The factories produce designs for mass use. Therefore, in the cities and other human settlements, there are many similar buildings: residential and administrative. This leads to the fact that the architecture of the region building is deteriorating.

The Fabrication of concrete structures and their elements is done in the following technologies:

  • Conveyor when the implementation process occurs sequentially.
  • Flow-aggregation. This technology provides for the implementation of technological operations in separate areas of the form with the structures or elements are moved with cranes.
  • Bench technology. Here is the opposite. Remain stationary products and move units.

Construction of monolithic structures

The Construction using this technology – a laborious process, but very clear. Monolithic construction can be done by hand.

Monolithic design

Construction:

  • Set the frame of the armature.
  • Settling of the casing, inside of it is placed the valve.
  • Is Filled with a mixture of concrete, which is compacted by special vibrators. This is to ensure that the formwork is not formed in the void.
  • Concrete trimmed.
  • Formwork is removed.

Monolithic construction: the advantages

In recent years, increasingly in the construction of residential homes use the technology developed for the construction of monolithic buildings that have a number of advantages:

  • No need to use heavy machinery, in particular cranes. Need concrete pumps, in which the concrete will be poured into molds and placed in the right place. On the plot where the house is built, there will be a landscape.
  • Technique of monolithic construction allows to erect constructions of any shape and height. Ceilings and walls are ready to finish, reduced construction time.
  • Load-Bearing walls monolithic house 2.5 times thinner than brick, although the thermal conductivity inferior to them. Heating costs are reduced by 4 times. By reducing the thickness of the walls increases the area of the internal space.
  • Monolithic construction provide strength and rigidity. On the Foundation loads are reduced due to the small thickness of the walls.
  • Monolithic construction allowed use of permanent formwork and traditional materials. It allows developers to implement the project in any style.
  • In these homes are no seams, are not affected by precipitation, to erect them at any time of the year.
  • Shrinkage of the Foundation is carried out uniformly.
  • Walls and ceilings no cracks.
  • Door and window openings are not deformed.
  • The Monolithic building is soundproof.

Monolithic buildings: disadvantages

Possessing many advantages, such construction has disadvantages:

  • To build the house you wantto attract additional labor.
  • The creation of the project monolithic house is an expensive service.
  • Concrete pour need to produce continuously, otherwise it will thicken. the
  • Living in a house without a tool hole in the right place walls can be done. the


Article in other languages:

AR: https://tostpost.com/ar/education/6010-what-determines-the-stability-of-the-structure-calculation-buckling.html

BE: https://tostpost.com/be/adukacyya/10693-ad-chago-zalezhyc-stoyl-vasc-kanstrukcy-razl-k-strata-stoyl-vasc.html

DE: https://tostpost.com/de/bildung/10696-wovon-h-ngt-die-stabilit-t-der-konstruktion-berechnung-knicken.html

ES: https://tostpost.com/es/la-educaci-n/10700-de-qu-depende-la-estabilidad-de-la-construcci-n-el-c-lculo-de-la-la-p-.html

HI: https://tostpost.com/hi/education/6013-buckling.html

JA: https://tostpost.com/ja/education/6011-what-determines-the-stability-of-the-structure-calculation-buckling.html

KK: https://tostpost.com/kk/b-l-m/10696-nege-t-ueld-orny-tyly-y-konstrukciyany-esepteu-t-ra-tyly-ty-zho-aluy.html

PL: https://tostpost.com/pl/edukacja/10694-od-czego-zale-y-trwa-o-konstrukcji-obliczenia-utrata-stabilno-ci.html

PT: https://tostpost.com/pt/educa-o/10690-de-que-depende-a-sustentabilidade-do-projeto-c-lculo-a-perda-de-estabi.html

TR: https://tostpost.com/tr/e-itim/10700-neye-ba-l-d-r-yap-sal-kararl-l-k-hesaplama-stabilite-kayb.html

UK: https://tostpost.com/uk/osv-ta/10696-v-d-chogo-zalezhit-st-yk-st-konstrukc-rozrahunok-vtrata-st-ykost.html

ZH: https://tostpost.com/zh/education/6550-what-determines-the-stability-of-the-structure-calculation-buckling.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

History of the study of Africa. The study of Africa by the Russian travelers

History of the study of Africa. The study of Africa by the Russian travelers

Africa – a distant and mysterious continent, which opened its secrets to the Europeans recently. A few centuries ago there was not even detailed maps showing the hot and exotic countries on the African continent. History of ...

I called him a

I called him a "pencil pusher"... to be offended or not?

Angry people were, are and will be, and it is necessary to accept. There is always someone who will envy you, because it is impossible to hide! What envy? Well... at least new purse. A car. Recent repairs, buying a cottage, going ...

Autonomy is a topic that requires deep study

Autonomy is a topic that requires deep study

In December 2017 will be 95 years from the date of formation of the USSR – States, which lasted nearly 69 years. During the Soviet Union emphasized the unanimous and voluntary entry of the fraternal republics in the USSR. Af...

The structure of the cell center. The structural features of the cell center

The structure of the cell center. The structural features of the cell center

Proved that the cells of eukaryotic organisms is represented by a system of membranes that form organelles protein-phospholipid composition. However, this rule has one important exception. Two organelles (the cell's center and the...

The explosions in Moscow in 1999 in the residential sector

The explosions in Moscow in 1999 in the residential sector

August 31, 1999, many residents of the Russian capital remember with horror and pain. On a Sunny summer day in the shopping center "Okhotny Ryad" suddenly an explosion. This event can rightly be considered the beginning of a serie...

Tale about animals: to compose together with the child. Writing stories about animals - the moment of creativity

Tale about animals: to compose together with the child. Writing stories about animals - the moment of creativity

About the first concepts of good and evil, the children learn from fairy tales. In this fictional Wizarding world good always triumphs over evil, there is justice and happiness. But very often it happens that some of the tale very...