Heat treatment of steel is an important process of metal production

Date:

2020-06-22 14:20:08

Views:

521

Rating:

1Like 0Dislike

Share:

Table of contents:

Heat treatment of steel is an important process in the production of iron alloy, which allows to improve its useful properties. Today, this procedure is used to convert the natural characteristics of the majority of metal products.

Heat treated steel

Heat treatment of steel involves sequential execution of three stages:

  1. Heat the iron alloy to the desired temperature.
  2. Shutter speed of steel for a certain time.
  3. Cooling.

What happens to the iron alloy with such a procedure?

Heat treatment consists of the following steps:

1. Annealing. This process is mainly used for casting, rolling and forging. This procedure is necessary to lower the hardness or reduce internal stresses that are generated in the welded products. In addition, annealing is used to prepare the metal structure for subsequent processing of thermal nature with the aim of improving its heterogeneity. This method includes the heat treatment of 45 steel, 45KH, 40XC, 40XH, and other grades of alloy of iron. Heat treatment of steel 45

2. Normalization. This procedure differs from the previous process, the nature of the passage of the cooling stage. The last step is carried out after the exposure details. Particular attention is paid to a predetermined temperature. In this case, the steel is obtained with minor but higher hardness. The structure of these fine products. Thus, normalization become necessary to correct the composition of the weld and to obtain the desired configuration.

3. Hardening. This step is associated with the processing of steel used for forgings, castings, stampings, and parts processed mechanically with the purpose of increasing of strength, hardness, corrosion resistance, wear resistance and other important characteristics. This process represents heat ferrous alloy to a temperature above or within the transformation. Aging steel in this termopechati, as well as the subsequent cooling is carried out, as a rule, with somewhat greater speed. This is most often used aqueous solutions of salts of NaOH, oil, and air. So, for example, heat treatment of steel 40x at this stage is carried out in the oil. Rarely details of the large size are subjected to hardening in the water with the immediate subsequent low vacation. Often the products from this brand iron alloy pass this stage due to the heating by high frequency currents. The result is a high solid surface.Heat treatment of steel 40x

Recommended

Staff evaluation: system and methods

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

business activities. its essence and basic functions

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

4. Vacation. This procedure consists in heating the hardened steel to a certain temperature. Further, the metal passes the shutter speed and cooling. The last step is generally carried out in air.

5. Aging. This stage consists in maintaining the alloy of iron with metastable structure during a long period of time. The temperature should be below room. This procedure allows the metal structure to partially move to a more stable state by changing their mechanical and physical properties.

6. Cold processing. This step is a continuation of the quench cooling that was interrupted at room temperature. The index for the metal is not critical.

The scope of the alloy of iron

As the procedure of heat treatment of steel can significantly improve the performance of parts made from the iron alloy in various grades, she is in great demand in all industries. Is no exception mechanical engineering, aircraft building, tank building, production of concrete products. The products passed thermal treatment can be operated in high dynamic loads and vibration. In addition, apply the following iron alloys in the construction of skyscrapers, factories and bridges.


Article in other languages:

AR: https://tostpost.com/ar/business/22835-heat-treatment-of-steel-is-an-important-process-of-metal-production.html

BE: https://tostpost.com/be/b-znes/40248-termaapraco-ka-stal---vazhny-praces-vytvorchasc-metala.html

DE: https://tostpost.com/de/business/39792-w-rmebehandeltem-stahl---ein-wichtiger-prozess-der-produktion-von-meta.html

ES: https://tostpost.com/es/centro-de/39521-tratamiento-t-rmico-de-acero-es-un-proceso-esencial-para-la-producci-n.html

HI: https://tostpost.com/hi/business/24461-heat-treatment-of-steel-is-an-important-process-of-metal-production.html

JA: https://tostpost.com/ja/business/22379-heat-treatment-of-steel-is-an-important-process-of-metal-production.html

KK: https://tostpost.com/kk/biznes/40631-termo-deu-bolat---ma-yzdy-nd-r-s-proces-metaldar.html

PL: https://tostpost.com/pl/biznes/42501-obr-bka-cieplna-stali---wa-ny-proces-produkcji-metali.html

PT: https://tostpost.com/pt/neg-cios/42130-tratamento-t-rmico-do-a-o-um-importante-processo-de-produ-o-de-metais.html

TR: https://tostpost.com/tr/business/37195-is-l-i-lem-elik-nemli-bir-retim-s-reci-metal.html

UK: https://tostpost.com/uk/b-znes/41134-termoobrobka-stali---vazhliviy-proces-virobnictva-metal-v.html

ZH: https://tostpost.com/zh/business/37305-heat-treatment-of-steel-is-an-important-process-of-metal-production.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Pyrolysis furnace. What is it?

Pyrolysis furnace. What is it?

Pyrolysis furnaces use the principle of combustion with a deficiency of oxygen with the release of the so-called wood or generator gas. It consists of fifty percent of the nitrogen and the same amount of a mixture of carbon monoxi...

Tank

Tank "Abrams": design and features

the Name «Abrams» tank was in honor of a General who fought in Vietnam. It is the main fighting machine of the United States. «Abrams» equipped with a sophisticated system of protection against various type...

Liquefied natural gas – the fuel of the future

Liquefied natural gas – the fuel of the future

Liquefied petroleum gas is a versatile synthetic mixture of propane, butane and minor amounts of unsaturated hydrocarbons obtained in the production of oil and its subsequent processing. In principle, such a mixture is a by-produc...

Disclose the secrets of success of great people

Disclose the secrets of success of great people

it is Unlikely that in the whole world there is at least one person who has not dreamed of becoming successful, rich, successful. However, for some this dream remains impossible, while others reach the desired result. But why this...

The silicate industry – and the house and roof, and utensils

The silicate industry – and the house and roof, and utensils

Like mushrooms after the rain in many cities of the world began to grow a grandiose skyscraper, which is a brilliant design solution, which combines concrete and glass. The construction materials, so popular at present, produces s...

Brass fittings the types, purpose

Brass fittings the types, purpose

When posting the pipelines often need to be connection parts to each other under an angle, creating branches, bends, or transitions to a different diameter of the pipe. For these purposes, use special accessories fittings. They co...