The land Owners will agree that mowing grass with the assistance of technology is much easier than running the process manually. To store such a device costs a lot. The output in this situation is to make this device your own hands. Mower would cost much less to operate and will do the same.
There are several varieties of devices for mowing grass. In their design and principle of operation are divided into three types:
Homemade mower may be of any type.
Depending on the method of use, as follows:
The latter is treated as an electric mower, And gasoline.
The Device of this mechanism is the most simple. It requires:
The size of the cart is cut out sheet metal. Further, from random barrels cut the bottom. Also cut a casing whose size should be slightly larger than the diameter of the disk. To the disk are mounted knives. To see how they are attached will help drawing mowing-machines, which you can see in the picture below. The elements are joined together by welding.
Homemade mower Works on the following principle. Knives can be rotated 360 degrees. Disc rotates, creating a centrifugal force. Under their action, start to finish knives.
The elements of the device can be rented from an old chainsaw.
The lawn Mower segment type according to its structure is more complex. But it can be made with your own hands. Mower of this type is collected as follows:
The mower Works as follows. The knives are driven through a special mechanism, which passes through the shaft rotational motion from the motor-block. It should be noted that the blades move back and rotational-translational motions. In this way, even high grass is mowed easily.
The Feature is the fact that the grass is cut but not crushed.
This option is also more complicated in comparison with a rotary mower. But it lends itself to manufacture with his own hands. Mower allows you to remove plants with thick stems, as mows plants with great force. This design could easily be converted into a snow-removal machine.
Assembled with his own hands, the mower can only operate after connecting it to equipment (tillers, tractors). And it must be done precisely and accurately. Even the slightest deviation from level is dangerous, due to the large speed.
When you connect a homemade device mowers to tillers, you must enable the reverse mode. The grip, the shaft is made by connecting node is made mowers and socket coupling technology.
The operation is necessary to observe safety precautions. Before starting work should be carefully checked, tightened all the bolts, mounted the parts. You cannot work in close proximity to strangers, to put on time work clothes.
Thus collected with their own hands mower is ready to use. Depending on the available materials and facilities required, the device can have several constructive types. But in any case, the mower will remove grass quickly and effortlessly.
Microwave ovens have become indispensable helpers in the kitchen. Earlier with their help it was possible only to heat food and prepare hot sandwiches. However, at present such devices have become multifunctional. They are equippe...
Lime — is the most popular material for treatment of the walls. It has disinfectant properties and is absolutely not susceptible to mold and various fungi. In addition, lime — it is also very cheap. Its price makes thi...
Today, almost every private house is equipped with fireplace. And in most cases it is of practical importance, rather than purely decorative. This is because private houses are rarely connected to district heating, they are heated...