Disc brakes on the rear VAZ-2114: replace with your own hands

Date:

2018-03-27 05:32:16

Views:

658

Rating:

1Like 0Dislike

Share:

Table of contents:

The Cars of domestic production are reliable and quite durable, despite the fact that they are widely abused. Low cost, availability of element base – key factors when choosing a machine. But every driver is trying to improve his iron horse, so for the beauty and reliability often put disc brakes on the rear VAZ-2114. Yes, it is beautiful – drum look pathetic on alloy wheels. And reliably – the brake efficiency increases several times in comparison with the standard equipment of the car.

Basic information

disc brakes rear on VAZ 2114

Since the release of the first car factory in Togliatti, but it was a model "VAZ-2101", popularly known as “penny”, almost to this day, the circuit of the braking system all vehicles remained unchanged. Ahead was a raised disc and rear drum. This is logical, as the main load when braking is necessary on the front.

Of Course, this scheme is much more efficient than that of the GAZ-24, which stand in a circle with drums. Because it's not a secret that the disc brake pads grab much better, and the way to the stop, respectively, is much smaller.

Tuning VAZ-2114

new VAZ 2114 price

The VAZ-2114 – this is a fairly recent model, which replaced the famous nine. Base cars are the same, even little things like the rear lights, and those are similar. But to significantly improve the machine yourself.

It is Worth noting that "Lada Kalina" - this is the first model where the factory installed it disc brakes on the rear axle. And we should also mention that all changes to your car, you do this entirely at your own risk. Intervention, modifications, steering, brake system, shall be punished with removal of license plates and prohibition of operation of the vehicle. But if you are not afraid, you can continue reading.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

What you need for tuning

vacuum booster VAZ 2114

If, however, decided to put disc brakes on the rear VAZ-2114, need to know what it will require elements of:

  1. Brake Disks. Ideal for those that are installed on the front wheels of the VAZ-2114 or similar models – 2108, 2109. Their diameter should be 240 mm. But need to pay attention to the fact that without the Turner not enough – hub differs slightly in design. And if specifically, it will have counterbore diameter 58 to 60 mm.
  2. Calipers, brake pads, hoses – also front brake models generation "Samara-1" and "Samara-2". So, you can purchase the entire set of front brake on corner.
  3. Plate for holding the fasteners of the callipers. You can make them yourself or purchase in the automobile.
  4. 12 bolts M10X1,25 length of 30 mm.
  5. Washer remote – 8 pieces. Are ideal those that are installed in the drive camshaft 8-valve models VAZ-2109 and 2114.

Well, that's all, bought all of the parts available all the necessary tools. It remains the case for small – to carry out a complete redesign. It should be noted that a fairly new VAZ-2114 (their price on the secondary market is still high) do not have rear brakes, but easily altered.

Demolition

adjusting the brakes

Before disassembly of the entire brake system on the rear axle must be drained. For this twist prokachannye fittings located on the calipers. Therefore, in the future will have to do the pumping. Initial work is as follows:

  1. Loosen the cable and bring the pads. Unscrew the guide studs that attach the drum to the wheel hub. If you can not easily remove the drum, adjust the seat abundantly penetrating lubricant WD-40. It should always be at hand when conducting such repairs. Even more – in advance (about half an hour) should be handling this liquid all threaded connections.
  2. Remove the springs with the flat-head screwdriver and remove spacer bar. Disconnecting the handbrake cable, you can completely remove old, now unnecessary block.

Please note that the handbrake no longer will you have (if you do not install hydraulic). Therefore, all components that are somehow related to the cable, including its, can be removed. And now we need to talk about the installation.

Installation disk brakes

how to bleed brakes VAZ 2114

The location of the caliper mechanism can be both in front of and behind the axis of the rear wheels. It will work anyway, but if you set back the efficiency a bit higher. Next, in your task is to correctly produce the matching of the hub faceplate. Pay attention to the defects, even minor ones. If there are gaps, guide the work on re-docking.

Guide the alignment of the corners of the rear beam. No this will not work to put the rear hub. It is most convenient to carry out the alignment using the grinder. To install the disc brake caliper, need to do some more actions:

  1. Mounted on the faceplate brackets.
  2. Fixedthe brake disc on the wheel hub.
  3. Set the spacing washers at the points of contact for increased reliability.
  4. Spend fixing faceplates and brackets.
  5. Swipe the sealing of the brake mechanism.
  6. Fixed the caliper and install the brake pads.

That was it, overall, as you can see, the job is simple. But caution must be exercised when installing, only use new items, especially the bolts. It is unacceptable to use the bolts that were in use. Thread they already deformed, though it is not visible to the naked eye.

The Positive qualities of rear disc brakes

disc brake pads

Yes, the main plus – an increase of security. Reduced braking distance, and it does not depend on the weather. A node is stable, the weather does not affect it. For example, during rain drum brakes become ineffective, the braking distance is extended. When using such a disk is not observed.

Overheating is not a terrible disc designs. For example, when braking at high speeds the liquid in the system heats up due to high friction forces. Drum and pads can warm up almost red hot – up to 600 degrees. As a result, fails the pedal, the braking performance significantly deteriorates. You will never feel if disc brakes are installed. The device is simple and the reliability is high, therefore the safety can not worry.

Bleeding the brakes

disc brake caliper

After all the work needed to make leveling – getting rid of air in the system. It is very necessary to improve efficiency. And since I started the upgrade, then do not forget to change all components that serve for a long time. Replace the hoses, front pads, vacuum booster VAZ-2114, master cylinder. As for fluid, you should change it approximately every two years. Briefly, the bleeding procedure looks like this:

  1. Pour into the expansion tank fluid.
  2. Pump right rear caliper.
  3. Check the fluid level, top up if necessary.
  4. Pump over the left rear caliper.
  5. Repeat item 3.
  6. Pump right front caliper.
  7. Perform item 3.
  8. Perform bleeding the front left caliper last.

Here's how to bleed the brakes of VAZ 2114 correctly, the essence of the procedure – to go from the far to the middle caliper (relative to the master cylinder).

Need a Parking brake?

disc brake device

But some motorists can not do without the handbrake. A new VAZ-2114, which at the time was close to 300 thousand, without handbrake, and is not very convenient. In cities without Parking it just anywhere. And if you set the auto-start system, without the handbrake simply can not do – the speed set is not recommended.

You need to install this mechanism? In the first place – it is the handbrake, but not cable actuated, and hydraulic cylinder. As a rule, they are universal, and Chinese new mechanisms in cost from 1500 rubles and above. And rear disc brakes on VAZ 2114 will be equipped with hammer system.

The installation process is extremely simple – put it in place of the old, fasten bolts, connected to the hydraulic system, namely – to the part which operates calipers on the rear axle. That's all, now you will with the handbrake, which will perfectly work in any conditions. Not afraid of any overheating, no frost, no rain pouring. And even in the cold, you can use the handbrake.

Conclusion

When will be fully completed installation and pumping, adjust brakes, inspect carefully all the knots, tighten threaded connections. And after the first exit on the road you will feel the difference with the same braking. It will be much more efficient, the car will become more stable.

I Must admit that this revision is necessary, and the traffic police should allow them, albeit with reservations. Kolhozah not, at least acceptance of the work and permission to use should give an experienced master. Of course, this dream will not happen. So you have yet to rework entirely at your own risk.

But the fact – disc brakes on the rear VAZ-2114 efficient and reliable. And install them you will only win, to protect themselves, their passengers and pedestrians.


Article in other languages:

AR: https://tostpost.com/ar/cars/962-vaz-2114.html

BE: https://tostpost.com/be/a-tamab-l/1645-tormazy-dyskavyya-zadn-ya-na-vaz-2114-zamena-sva-m-rukam.html

DE: https://tostpost.com/de/autos/1642-scheibenbremsen-hinten-auf-der-vaz-2114-der-austausch-mit-ihren-h-nden.html

ES: https://tostpost.com/es/coches/1647-los-frenos-de-disco-traseros-en-vaz-2114-la-sustituci-n-de-sus-manos.html

HI: https://tostpost.com/hi/cars/962-2114.html

JA: https://tostpost.com/ja/cars/961-vaz--2114.html

KK: https://tostpost.com/kk/avtomobil-der/1645-tezheg-sh-disk-l-art-y-vaz-2114-auystyru-z-olymen.html

PL: https://tostpost.com/pl/samochody/1648-hamulce-tarczowe-tylne-na-vaz-2114-wymiana-w-asnymi-r-kami.html

PT: https://tostpost.com/pt/carros/1645-freios-a-disco-traseiros-em-vaz-2114-substitui-o-de-suas-m-os.html

TR: https://tostpost.com/tr/arabalar/1651-fren-disk-arka-vaz-2114-yedek-elleriyle.html

UK: https://tostpost.com/uk/avtomob-l/1647-gal-ma-diskov-zadn-na-vaz-2114-zam-na-svo-mi-rukami.html

ZH: https://tostpost.com/zh/cars/1047-vaz-2114.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

An overview of car

An overview of car "Volga-29"

During Soviet times, “Volga” was an unattainable dream of many citizens. On these machines went to the higher ranks of leadership and celebrity. With the collapse of the Soviet Union, the dream has become a reality &nd...

Starting the engine – start motorist

Starting the engine – start motorist

Now on the roads of the city can be seen as vehicles of a new type, and outdated models. They differ from each other not only in appearance, but have different device and the progress of the work, thus starting the engine in the c...

Nissan AD, reviews and features

Nissan AD, reviews and features

Nissan HELL – one of the cars of the Japanese company Nissan, produced from 1999 to 2006. This model is available in five-door five-seater wagon.Nissan AD. Features:the Car was produced with engines 4-types of volume from 1....

French truck Renault Mascott (

French truck Renault Mascott ("Renault Mascot"): specifications, equipment, reviews

With the purchase of small commercial vehicles often raises the question of the choice of the brand – domestic or “Ino”? Many people come to the selection of domestic ‘Gazelles’. They are more afforda...

Salon

Salon "UNIX-the Car": responses. Divorce in the showroom Uniks - true or not?

Expensive purchase – it is always an exciting moment for any person. Car buying is no exception. If the process runs perfectly, any person will be happy. Most people prefer to postpone after a certain period of time a certai...

Motorcycle

Motorcycle "Yamaha Diversion 600": specifications and reviews

See a bit of history. In 50-ies of the last century, in the postwar period of technological development the world famous Yamaha finally resumes the production of motorcycles. The first model of Yamaha Diversion was released in 198...