Crusher for grain is a great help on the farm

Date:

2018-04-01 21:49:10

Views:

46

Rating:

1Like 0Dislike

Share:

Owning a farm gives the opportunity for a comfortable existence and at the same time requires a lot of time and effort. Work on rural enterprises, many – topping cattle, forage, mowing and so on. In this case, it is advisable automating labor processes. To date, the range of agricultural equipment is varied, and you can pick up practical tools that will facilitate the working processes. Among such devices there is a crusher for the grain – Assembly required for agricultural enterprises.

Fit

crusher for grain

This device is a mini-mill for grinding various crops such as barley, grain and other agricultural plants used as a supplementary feed for animals and birds. The entire process is automated and does not require large expenditures of energy.

Usually, crusher for grain consists of a main compartment, called the hammer chamber, where there is a direct grinding grain with the help of powerful special hammers. Here the raw material enters from the intake under the action of the pneumatic control system by a flexible hose, wherein the grain is cleaned a trap from magnetic particles and stones. Then the crushed mixture was screened through sieves and sent to the diffuser chamber. After this feed Supplement is at the stage of drying in the chamber venting and served in the compartment of the mixing of feed by pneumatic system.

The Advantages of Assembly

jaw crusher for medium-CX enterprises

Crusher for grain is a great help in keeping the domestic economy. The use of this device has a number of advantages:

  • Great performance – you can handle such a large amount of crops to produce high-quality feed;
  • Rationality and profitability – after the grinding process the grain is ready to use; automated process allows to preserve the taste quality and the usefulness of the product;
  • Economy – procurement of its production cost is much cheaper compared to purchased feed.

How to make crusher with your own hands?

Recommended

How to choose a disc for a circular saw? Where and how you can sharpen the disc for a circular saw?

How to choose a disc for a circular saw? Where and how you can sharpen the disc for a circular saw?

Circular saw is a versatile tool that can work with a variety of materials – from wood to plastic and sandwich panels. But the cut was smooth and without chipping requires a correctly selected drive for a circular saw. Note that the universal d...

How to make a portal for the fireplace made of plasterboard with their hands?

How to make a portal for the fireplace made of plasterboard with their hands?

The Portal for the fireplace is decorative frame. It can be made from different materials. One of the most popular types is the drywall. It is relatively inexpensive and easy to handle.There is a certain technique how to make a portal for the firepla...

Suspended ceiling type

Suspended ceiling type "Armstrong": device specifications

Today, for the ceiling finish is applied a variety of different materials. They differ in operating characteristics, method of installation. One of the best options for finishing office spaces, buildings, shopping, entertainment centers are suspended...

barley grain

Crusher for grain is not an overly complicated device, and if desired, this arrangement can be done by hand. For this you will need the following tools and materials:

  • Engine – can be used from the old vacuum cleaner;
  • The sieve or perforated plate for the screening of the mixture.
  • Bolts and other fastenings;
  • Sheet metal thickness of about 5 mm;
  • Capacity – pot or pan where you will meet the milled grain;
  • The knife-plate and plywood sheet;
  • Washers, pins and bushing.

Procedure:

  1. Manufacturer working chamber. For this purpose the metal sheet to be bent in the form of a casing of annular shape. Size 220×40 mm. to Bend the edge out by about 1 cm, to form flanges for fastening the sieve and the bottom.
  2. The Implementation of the unit. On a sheet of plywood to mount the engine, so that the rotation shaft passed into the hole down to 40 mm. On the threaded shank of the shaft is attached a knife-plate, using the washers, nuts, bushings and pins.
  3. On the right size container put on a sieve or perforated plates whose diameter is customized.
  4. Set the lid on Top of the engine with a knife.

It should be noted that this crusher operates by the General principle of crushing hard objects. As, for example, jaw crusher for medium-CX enterprises, used to grind ore and solid natural elements (rocks, different rocks, etc.).

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Sumac leather: care, reproduction, photos and reviews gardeners

Sumac leather: care, reproduction, photos and reviews gardeners

Sumac leather or, as they call it plant - sumac tanning, grows in the South of Russia, and also in the Mediterranean countries and the Crimea. You can see the sumac and the Himalayas, and on the southern slopes of the mountains in...

Mortar Assembly: description, technical specifications and diagrams

Mortar Assembly: description, technical specifications and diagrams

What is the mixing unit, known to every specialist the field of construction. For consumers it is the opportunity of obtaining fresh solution next to the building site. For entrepreneurs – it is a profitable business, where ...

Coffee tree: plant care in the home.

Coffee tree: plant care in the home.

a Beautiful evergreen tree, growing in the wild up to five feet, with glossy dark green leaves and white fragrant flowers that appear on the third or fourth year of growth, where the formed green berries, a bit like cherries. Ripe...