Do the doors with their hands

Date:

2019-09-06 07:20:24

Views:

697

Rating:

1Like 0Dislike

Share:

Table of contents:

 

New doors with your own hands is not difficult, it is necessary to have basic skills in construction.

Start the specified type of work necessary with the dismantling of the old design. Also many apartments have a niche such closing which modern door coupe, you get a great wardrobe.

Start to install interior doors with their hands should be from the measurement of the opening where they will be and only then can you go to the nearest hardware store to buy a door, rollers, rails and screws and you will need a screwdriver.

Consequently, before you start doing door-coupe with their hands, it is necessary to purchase the necessary materials.

If the opening is not very big, it is enough the single door, and if it is of significant width, it is better to install a double door-compartment, in this case, it will have to acquire the two paintings. It should be noted that when the purchase must pay attention to the fact that it's got 5-7 inches wider than the door opening.

About the additional materials you can not worry, as in any construction specialty store they always go in the kit. Door knobs buy in its sole discretion, the number will match the number of shutters doors. Also don't forget to buy a wooden beam of size 50x50mm, length must be two times more than you create doors with his hands.

When installing the doors the first step is the rail mount to a wooden beam. This should be done securely using the mounting screws. Now fasten the strap to the top of the door, subsequently acceded to by the guide rollers. Using the adjusting nut the bar should be put in a horizontal position.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Then at the bottom of the door using a chisel it is necessary to make a groove which will then move the lower roller. It is fastened to floor surface with screws.

Now we have a very careful installing the bar, as it is incorrect fixation can lead to spontaneous opening or closing made door coupe with his hands. When fixing timber it is necessary to use strong anchors and so this part of the work is best done together, so you can set and fasten the beam is exactly horizontal.

Also pay attention to the installation of the lower guide roller, which should be definitely under guide. If it does not comply, then there is a bias, and the door will not open. Correctly install the lower roller is possible by means of the construction of the plumb, and if not, then you can use any thread with a load.

Now you only have to put the door panel on the lower roller, and then held its final mounting on the top rollers. Also don't forget to set special constraints that are included, otherwise the door may open to go beyond the guide bar.

Carry out final work, which is in the closure of the beam with the casing, for this it is necessary to use a special finishing nails. Also close the bar and end sides.

The final adjustment door coupe and only after they are completely adjusted, you can proceed to install the correct handles with the location which will be easy to determine.

Exactly the same technology you can make a door for the wardrobe with his hands.

Thus, the door coupe save space, but one drawback is that they are not as tight as usual, and soundproofing will be worse, but sometimes for more convenience, something has to give.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/36449-rob-m-dzvery-kupe-sva-m-rukam.html

DE: https://tostpost.com/de/gem-tlichkeit/36095-machen-die-t-ren-abteile-mit-eigenen-h-nden.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/35932-hacemos-puertas-cup-de-sus-manos.html

KK: https://tostpost.com/kk/domashniy-uyut/36754-zhasaymyz-es-kt-kupe--z-oldarymen.html

PL: https://tostpost.com/pl/komfort-domu/38038-robimy-drzwi-coupe-w-asnymi-r-kami.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/37795-fazemos-portas-deslizantes-com-as-m-os.html

TR: https://tostpost.com/tr/domashniy-uyut/33216-yapt-m-z-kap-coupe-elleriyle.html

UK: https://tostpost.com/uk/domashn-y-zatishok/37062-robimo-dver--kupe-svo-mi-rukami.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Roof with their hands out of metal: the intricacies of installation

Roof with their hands out of metal: the intricacies of installation

Metal combines several advantages. This is a budget, durable and easy to work material. Not surprisingly, many stop your choice on a roof. Understanding how to lay metal roofing on the roof, you can even cope on their own, coverin...

Mushrooms tacachico: important tips for hunters

Mushrooms tacachico: important tips for hunters

today in nature there are about a hundred thousand species of fungi. Many of them are dangerous to human life, but most of them needs only the right approach to gathering and preparation.a little-known and require adequate experie...

Led strip white 12V: mounting and installation

Led strip white 12V: mounting and installation

Led strip white 12V is a specific printed circuit Board, which consists of series-mounted LEDs, and resistors, which act as resistance elements. Let's consider characteristics of the connection and installation of the specified li...

How to make a bar at home-the DIY guide

How to make a bar at home-the DIY guide

Fans of a healthy lifestyle do not always have enough money and free time to visit the fitness center. Come to the aid of horizontal bars and other projectiles in the yard or on the nearest open area. But such structures have not ...

Paint and Pattern - reviews . Paint for wooden houses: manual, price

Paint and Pattern - reviews . Paint for wooden houses: manual, price

the Main advantages of paint “Pattern” are wide range and low cost. The quality of this brand of coatings are practically not inferior to foreign funds, however, contains more harmful substances.ManufacturerManufacture...

What is soldering copper pipes

What is soldering copper pipes

Pike & ndash; is the process of connecting elements made of different materials, by the introduction of solder between them. In addition, this material has a melting point lower than that of the other parts. This operation is ...