Mortar Assembly: description, technical specifications and diagrams

Date:

2018-04-01 22:33:12

Views:

510

Rating:

1Like 0Dislike

Share:

Table of contents:

What is the mixing unit, known to every specialist the field of construction. For consumers it is the opportunity of obtaining fresh solution next to the building site. For entrepreneurs – it is a profitable business, where demand is high.

Description of the different types of mortar nodes

mixing unit

To date, there are two types of mortar units:

  • Fixed;
  • Mobile.

The First – this process chain, which can be arranged in close proximity with the major industries of concrete products. They focused on the production of certain brands of formula.

As for mobile options, they can be used on site during construction works, they can rent. There are also semi-permanent sites that can be partially disassembled and moved within the site.

Description mortar sites on the basis of the principle of operation

mortar salt knot

The Mortar Assembly can be classified also on the characteristics of the technology of preparation of the mixture. According to her, these mini-plants are divided into the cyclic setup and the ones that provide continuous action. In the first case we are talking about units that are preparing the concrete batches. This indicates that repeated loading of components can be carried out after the liberation of the mixer.

The Installation of continuous action to allow a greater volume of solution over time. This is because the filing, the subsequent mixing and discharging of a solution are performed in parallel. As a drawback of such installations is the inability to quickly switch the device for the manufacture of mixtures of different brands. In addition, the output solution does not always work stable.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

The Mortar Assembly can be classified also by the seasonality of use. Some mini-mills can be operated only in summer, others – all year round. For year-round production of solution used winter modifications. They have a insulating lining and have a heating system. However, even these designs are characterized by reduced performance in cold weather by almost two times, this is due to the fact that spent a huge amount of time to heat the components of the mixture.

Specifications

RBU

Mixing unit consists of several modules, among them:

  • The hopper of the mixer;
  • Capacity with strain sensors and measuring devices;
  • Tank with a filtration system and water;
  • The control.

To ensure the host must have transport modules, namely:

  • Grab lifts;
  • Conveyor;
  • Skip the lifts.

Without the presence of the tanks for loading and storage of dry components as well as vibrating machines, subsidiary machinery and services mixing unit is a plain concrete mixing plant. Choosing mortar-concrete node, you must pay attention to the basic specifications, including capacity and performance.

Mini-plants can produce approximately 10-25 m3 of concrete per hour. If we are talking about standard setups, they will issue 400 m3/h. the Characteristics of work items can be different, so when ordering it is important to pay attention to the following parameters:

  • Number of tanks;
  • Capacity of tanks;
  • The presence of plants of dosing;
  • Hopper.

As for numbers of tanks, then they will be aggregates of different factions.

Description mortar-salt site

mortar units greenhouses

Mortar-salt site is intended for the preparation of solutions with different specific weight. The composition should be free of insoluble impurities of suspended particles that would be harmful to the oil reservoir. Such installations are used to produce liquids, which are used for killing of wells.

Working nodes in semi-automatic mode, and the performance is ensured by the presence of staff. The equipment is fitted with flow meters and instrumentation which allow you to monitor the cooking process visually and remotely.

Preparation of solutions

preparation of solutions for concrete mortar nodes

Preparation of solutions for concrete and mortar nodes is carried out on a particular technology. It may involve the use of continuous or volumetric dosing principle. The accuracy of dosing of cement is 2%, for water – 1%, for milk of lime – 0.5 per cent. As for sand, the accuracy in this case can vary depending on its moisture content in the range from 1 to 3.5%.

For dosing of sand used tape dispenser, for cement-screw. The fluid is supplied under the constant pressure provided by a tank. Horizontal mixing machine ensures the mixing of the components. The prepared solution passes through the vibrating screen and fed to the place of consumption with the help of mortar. Mortar units are economical, and their use allows to reduce the costthe preparation mixture in the range from 30 to 50%.

Equipment

Mortar units of the greenhouses are used to prepare the nutrient solution, conduct and scheduling of drip irrigation in greenhouses. These devices allow you to organize the supply of a solution for the individual zones at the time of irrigation and mud flow.

Using a certain program, you can schedule watering during the day. Depending on the capabilities of the system, the program allows you to begin to glaze, taking into account several types of effects. Notable among them are:

  • Time;
  • Solar radiation;
  • Moisture level of the substrate;
  • Temperature.

Conclusion

In the mortar nodes must be mixing hopper. It may assume that the spare drum, operating with low energy consumption. Cooking hard mixtures it is impossible, because of the gravity tank will not cope with plastic solutions.

Special mobile capacity is used for forced mixing, which involved the blade. The wear of the working elements is faster and the power consumption increases.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/18331-rastvornuyu-vuzel-ap-sanne-tehn-chnyya-haraktarystyk-shemy.html

DE: https://tostpost.com/de/gem-tlichkeit/18337-rastwornyj-knoten-beschreibung-technische-daten-und-schaltpl-ne.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/18352-rastvornyj-sitio-descripci-n-caracter-sticas-t-cnicas-y-esquemas-de.html

KK: https://tostpost.com/kk/domashniy-uyut/18327-rastvornyy-toraby-sipattamasy-tehnikaly-sipattamasy-men-shemasyn.html

PL: https://tostpost.com/pl/komfort-domu/18299-rastvornyy-w-ze-opis-dane-techniczne-i-schematy.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/18301-rastvornyy-site-descri-o-caracter-sticas-t-cnicas-e-esquemas-de.html

TR: https://tostpost.com/tr/domashniy-uyut/18337-rastvornyy-sitesi-a-klama-teknik-zellikleri-ve-emas.html

UK: https://tostpost.com/uk/domashn-y-zatishok/18323-rozchinniy-vuzol-opis-tehn-chn-harakteristiki-ta-shemi.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Coffee tree: plant care in the home.

Coffee tree: plant care in the home.

a Beautiful evergreen tree, growing in the wild up to five feet, with glossy dark green leaves and white fragrant flowers that appear on the third or fourth year of growth, where the formed green berries, a bit like cherries. Ripe...

Stabilized flowers – chic decor. How to stabilize colors by yourself

Stabilized flowers – chic decor. How to stabilize colors by yourself

Stable called flowers, who got special treatment special chemical compounds. Such plants are able to maintain its original fresh look for a very long time.In contrast to the compositions of dried flowers, these flowers do not fall...

How to store Lily bulbs in winter at home - features, methods and recommendations

How to store Lily bulbs in winter at home - features, methods and recommendations

very popular among gardeners is so bulbous flower like a Lily. Sometimes it seems that the fog came from the sky and created a delicate fragrant flower. Allow the lilies to create a bright flower-beds in gardens, decorate your bal...

Orchids of Vietnam: features of care. How to plant an Orchid

Orchids of Vietnam: features of care. How to plant an Orchid

Orchid – a tropical plant with beautiful, fragrant flowers of different colors and shapes. In nature, there are a huge number of varieties of this flower. Many are suitable for growing at home. Some of them read the article....

How to calculate the optimal height of the bath from the floor?

How to calculate the optimal height of the bath from the floor?

renovating the bathroom, try not to let go of the tape. Accurate measurements make it possible to more rationally arrange the plumbing to map out the future location of the required cabinets and shelves. In addition, you'll know w...

The semi-automatic welding machine 220V: description, specifications

The semi-automatic welding machine 220V: description, specifications

Semi-automatic welding machine 220V is a compact and handy tool that ensures reliable and qualitative connection. The principle of exposure based on the formation of a continuous current electric arc. Such equipment is useful not ...