How to tint a car properly?

Date:

2020-03-14 21:00:07

Views:

793

Rating:

1Like 0Dislike

Share:

Table of contents:

How to render car? This is a question that deserves special attention. The appearance of the vehicle with good design and breathtaking tuning – that's what attracts the eye of everyone around. Toning refers to the tuning. Is more to consider how to tint a car, because the tinted car will gain charm, Shine and appearance.

How to tint a carTinting film, among other things, prevents many unpleasant effects on the car. Among them, burnout plating, instrument panel, sound and audio equipment. In addition, the tinting will create a barrier that will prevent the sun to blind the driver.

When tinting film automotive glass is not removed. Maybe just removed the door panels and that is very rare. In addition, this is a very quick process: a car full of three hours. It does not scratch glass. Another advantage of tinting film for cars – it can be removed at any time, and the glass will remain intact. It is also heat-resistant: not afraid of no overheating, no cold. She's not a glare, not demetiliruetsa, peeling off and bubbling. Plus it does not transmit ultraviolet rays.

How to tint a car?How to tint a car with their hands? Not as difficult as it may seem. It will need a spatula-eraser, shampoo, knife, blade, ruler and tape.

How to tint a car? To begin with it should be washed thoroughly, washing off all the fat with glasses. If you do not do it as well, then under the film gets clogged up with hairs, dust particles, and this can lead to a bad result. Then you need to measure the glass (taking into account the allowance of five inches on each side), and you are ready to film, and more precisely, to its cutting. Need to find a transparent film side. Then you need to take the tape and liberally sprinkle it with water, in which there is a sufficient amount of shampoo. The film should be moist, and even wet. Then it is split to the end (need to make sure that her parties are not stuck together), and the transparent part is ejected. Side adhesive film applied to automotive glass. You will then need a rubber eraser, which from the centre will need to drive water to the edges. The tape should hold that it does not slip. Attention! You need to remove ALL the water. An hour later, you can crop the film. But in any case not exactly on the edge – it needs to wait about 8 hours. For best results, dry the film with Hairdryer.

Recommended

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Tint film for autoHow to tint a car, or rather, her rear window? For him the film is fixed in a different way. It is necessary to first inspect, then wash thoroughly. Mount starts with the top. Washing liquid must spread on top of the already cleaned glass. Then 1/3 of the film is separated and the liquid is sprayed profusely on its surface. The same operation will be repeated with the remaining 2/3 of the film. As already mentioned, we will have to wait a few hours, and then you can adjust. A word of advice: the first 2-3 days do not need to open the window in order to avoid possible deformation (in this case, if the film is not the highest quality).


Article in other languages:

AR: https://tostpost.com/ar/cars/21487-how-to-tint-a-car-properly.html

BE: https://tostpost.com/be/a-tamab-l/39016-yak-tan-ravac-mashynu-prav-l-na.html

DE: https://tostpost.com/de/autos/38538-wie-get-nten-maschine-richtig.html

ES: https://tostpost.com/es/coches/38301-como-te-ir-la-m-quina-correctamente.html

HI: https://tostpost.com/hi/cars/23055-how-to-tint-a-car-properly.html

JA: https://tostpost.com/ja/cars/21069-how-to-tint-a-car-properly.html

KK: https://tostpost.com/kk/avtomobil-der/39389-alay-tonmen-aptau-a-mashina-a-d-rys.html

PL: https://tostpost.com/pl/samochody/41069-jak-barwione-samoch-d-poprawnie.html

PT: https://tostpost.com/pt/carros/40730-como-escurecido-a-m-quina-corretamente.html

TR: https://tostpost.com/tr/arabalar/35899-nas-l-bir-renk-tonu-ile-bir-makine-de-il-mi.html

UK: https://tostpost.com/uk/avtomob-l/39829-yak-tonuvati-mashinu-pravil-no.html

ZH: https://tostpost.com/zh/cars/25694-how-to-tint-a-car-properly.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

The power of the car engine - how to increase?

The power of the car engine - how to increase?

If we talk about the power of the engine of the vehicle, it is first necessary to be clear about what will be discussed. This work, which is produced during the combustion of the fuel-air mixture in the cylinder over a period of t...

Review of UAZ-31512

Review of UAZ-31512

UAZ-31512 – four-wheel drive SUV domestic production. Its characteristic differences from the military model 469 – it is a canvas roof and tailgate.productionthe jeep was produced at the Ulyanovsk automobile plant sinc...

Tuning VAZ-2113: how to highlight his

Tuning VAZ-2113: how to highlight his "iron friend" from the crowd?

Probably, every owner dreams of the Vase to highlight his "iron friend" from the gray mass car. Everyone wants to create beautiful, powerful, athletic, and most importantly – unique vases that do not look like their counterp...

Tricycles from all over the world

Tricycles from all over the world

Tricycle – it's a motorcycle or mini-car? It is this first question arises when looking at the tricycles. This engineering marvel can be called intermediate.three-wheeled Motorcycles somehow a think a Chinese inven...

UAZ

UAZ "tadpole" - a small all-terrain vehicle

UAZ “noodle”… This little van for the long period of its existence managed to conquer all roadless trails Russia and Ukraine. In almost every village you can find the UAZ model 3303. Know him everywhere, and to ...