Manufacture of magnet at home

Date:

2020-05-15 19:20:08

Views:

456

Rating:

1Like 0Dislike

Share:

Table of contents:

People first became acquainted with the magnet in ancient times. However, very quickly this natural stone has ceased to meet the needs of the people. It was then developed the technology of manufacturing magnets. Of course, since then much time has passed. Technology has changed considerably and it is now possible to make a magnet at home. It does not need to possess special skills and knowledge. It is sufficient to have at hand all necessary materials and tools. So, making magnet are as follows.
making magnet

Soft materials

All materials capable of magnetization, can be divided into soft magnetic and hard magnetic. Between them there is a significant difference. Thus, soft magnetic materials retain magnetic properties for long.

You Can do an experiment: spend a few times on a strong magnet iron wedges. As a result, the material will acquire the properties to attract other metal objects. However, the production of a magnet, constantly have these abilities, in this case is impossible.

Magnetic materials

These materials are the result of magnetization normal piece of iron. In this case, the properties remain much longer. However, they completely disappear upon impact of the subject on a fairly hard surface. Also magnetic properties are destroyed if you heat the material to 60 degrees.

What you need

Production of magnets with their hands will not take much time and does not require much cost. This requires:

  • Screwdriver
  • Oiled paper;
  • Fuse;
  • Switch;
  • Copper wire;
  • The strongest permanent magnet.

the manufacture of permanent magnets

Method one

This method is the most simple. Enough to hold in one direction several times magnetized the subject of permanent strong magnet. That's all. Note, however, that magnets manufactured by a similar method to keep the magnetic field for long and very quickly lose their properties. These products are only suitable for simple manipulations. For example, such a magnet can help remove the rubble from the slit the needle and draw the bolts, but no more. Therefore, this method seriously consider not worth it.

Recommended

Staff evaluation: system and methods

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

business activities. its essence and basic functions

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

Method two

The Manufacture of permanent magnets can be realized in another way. This will require a battery. You can use it to magnetize any suitable material. It is quite simple and requires no special tools. Metal object magnetic properties attached to the electromagnet.

Let's consider an example with a screwdriver. To start the tool should be wrapped by insulator and then wound about 300 turns of wire. It is better to use the one that is used for the manufacture of transformers. After this wire must be connected to the battery or the battery, preferably on 5-12 volts. As a result of such manipulation of the electromagnetic field will magnetize the screwdriver.

technology magnet

The third Way

Magnet Manufacturer can seem difficult. Since the above method does not guarantee that the properties will be stored for a long time. A stronger magnet can be created using field coils. The metal blank should be small, as it will need to be placed inside the coil. After that, you should perform the exact procedure as described in the previous method. The only difference is that the turns of wire have to do twice, that is, 600. Only in this case it might be good for a magnet.

The fourth Way

The Manufacturer of the magnet in this case involves the use of current drawn from the mains. This method is quite dangerous, so all manipulations should be performed carefully. We will need a fuse, without which nothing happens. It must be connected with the inductor coil, which is located inside a metal blank.

Of Course, the inclusion of a similar construction to the network will burn the fuse. However, during this short period of time the metal blank will have charged, as in this case created a sufficiently strong electromagnetic field. Here it is worth considering one nuance: the higher the amperage, the stronger get a magnet. For coil winding should be used only copper wire.

magnet hands

In conclusion

The Manufacture of permanent magnets at home — the process is fairly simple. However, when you use certain diagrams should be neat.

The Most powerful permanent neodymium magnets is considered. Make it at home, but this requires the procurement of rare earth metal — neodymium. In addition, to apply the alloy of boron and iron. Such a workpiece is magnetized in a magnetic field. It should be noted that this product has tremendous power and loses only 1 percent of their properties for a hundred years.


Article in other languages:

AR: https://tostpost.com/ar/business/22849-manufacture-of-magnet-at-home.html

HI: https://tostpost.com/hi/business/23925-manufacture-of-magnet-at-home.html

PL: https://tostpost.com/pl/biznes/42084-wykonanie-magnesu-w-warunkach-domowych.html

PT: https://tostpost.com/pt/neg-cios/41619-o-fabricante-do-m-em-casa.html

UK: https://tostpost.com/uk/b-znes/41044-vigotovlennya-magn-tu-v-domashn-h-umovah.html

ZH: https://tostpost.com/zh/business/47975-manufacture-of-magnet-at-home.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Processing of polycarbonate greenhouses in the spring against pests and diseases

Processing of polycarbonate greenhouses in the spring against pests and diseases

the Function of any greenhouse or greenhouse polycarbonate is to ensure favorable conditions for growing crops. Along with this, the optimal temperature and humidity contribute to the activation of various pests, germs and disease...

Business - coffee machines (feedback). The time it pays off, do I need to register IP?

Business - coffee machines (feedback). The time it pays off, do I need to register IP?

Coffee is one of the most popular modern drinks. It accompanies our morning rise, lunch in the office, a trip on the transport, waiting in the cabin. Practically in any point of the metropolis alluring aroma will attract our atten...

AppGlobal: reviews of the franchise

AppGlobal: reviews of the franchise

the Number of users of mobile phones operating systems Android, iOS and Windows Phone is growing every day. People understand that with a smartphone they have access to unlimited information: you can plan your day, keep the books,...

What determines the success of entrepreneurial activity? Typical mistakes of newcomers in entrepreneurial activities

What determines the success of entrepreneurial activity? Typical mistakes of newcomers in entrepreneurial activities

the activities of the entrepreneur at first glance seems simple. But it is not. Aspiring businessman have a lot to learn and master, so that his business was more profitable, and products or services in demand. You first need to d...

Preparation of cucumber seeds for planting in the ground, seedlings in the greenhouse

Preparation of cucumber seeds for planting in the ground, seedlings in the greenhouse

every year from January to March for each gardener comes an exciting moment — harvesting the seedlings of your favorite veggies. All gardeners, of course, have their corporate secrets to getting a great harvest. But what abo...

Stroygazconsulting: employee reviews

Stroygazconsulting: employee reviews

One of the leaders in construction industry in Russia is the company “stroygazconsulting”. This is the largest group, which employs more than 60 thousand people. The balance of the holding is more than 14 thousand unit...