How is noise insulation VAZ-2114 with his own hands?

It's No secret that every car from the conveyor supplied with special vibration and noise isolation. However, not all manufacturers provide their own models for a truly high-quality sound insulation. For example, the car VAZ of the ninth model was originally characterized by its low level of protection against noise and vibrations. And even with the release of the second generation “Samara" (now this is a model 2114), which has suffered from multiple technical modifications, this situation has not changed. Therefore, modify these cars the car owners. But how is the sound insulation of VAZ-2114 and where to start? Let's look at.

Prepare for

In order to get to the desired item, we will need a small tool kit trim removal. Only then will we be able to see with my own eyes, what is it, Wazowski insulation. VAZ-2114 has not very complex scheme sheathing and fastenings of the seats, so if you have a manual or even without it to do the job for an hour and a half. For those who want to provide maximum quiet interior, it is also recommended to remove the skin of the floor and ceiling.

Step by step instructions

In the first place after removing the trim we pay attention to bitumen sheets. It is the entire insulation VAZ-2114. If the leaves have a rough or undulating surface, it must be replaced. When the bitumen is smooth and free of damage, no remedial actions are needed. On top of the sheets we glued an extra layer of insulation. But before you do, regular items must be thoroughly cleaned and degreased. The most effective tool for this will serve alcohol. Also, this tool enables you to remove minor traces of corrosion on the car body.

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

Next preparing for the application layer of the vibration absorber. It is best to take the foil detail – it is more effective in practice than all others. Apply the material to the surface of the roof and doors with adhesive-based 1.5 mm. On the floor and wheel arches should slightly increase (to 2 mm) of this layer.

All of the available and prominent places of the car body carefully glued insulators. When on the surface of metal having folds (ribs), take up roller and carefully roll the material over the entire area. So you can be sure that the insulation VAZ-2114 was made at the highest level.

Then over the freshly applied part sticking shumoizolyatory. The whole process of applying is similar to the first, however, here the thickness of the adhesive bases on the body should be 0.4-0.7 mm. Arches and trunk sticking with 0.8-millimeter basis. Also, glue and wire. VAZ-2114 (white) is often a bunch Swissy parts on the door cards, which are constantly rattle and vibrate. Therefore, the completion of work to seal all the wires to the new shumoizolyatory. All, at this stage you can assemble the interior back in and drive a car for pleasure. By the Way, the cooling system of VAZ-2114, which includes the radiator and antifreeze, in no way will affect the result of works, so do not be afraid to make sound with his hands.