Timber trucks KAMAZ: a brief overview

Domestic appliances manufactured by the Kama automobile plant, used in virtually every industry, including forest industry. The designers involved in the development of trucks «KAMAZ», took into consideration the difficult operating conditions, making the truck a real off-roader.

Features of the truck

Thanks to an improved chassis all-terrain cargo vehicle able to move on public roads and over rough terrain to get to remote places for later loading and transportation of timber. Cab trucks «KAMAZ» feature heavy-duty construction for maximum safety for both the driver and the freight forwarder. The last task is the maintenance of the goods to destination.

Buyers who opt for the trucks «KAMAZ», have the possibility to install the manipulator of foreign or Russian manufacture. The cranes can be mounted on the chassis at the back or in front (immediately behind the cab) that allows you to obtain the necessary functionality for a particular location of the load. For example, the rear location of the mechanism enables loading and unloading of assortment is not only a truck but a trailer. In the case of location of the manipulator on the front significantly improves the weight distribution of the truck «KAMAZ».

We Offer a cursory inspection of the models 4310 and 43118 that will allow you to get an idea about the technical characteristics of the domestic trucks produced at the Kama automobile plant.

«KAMAZ-4310”

This model is equipped with cabin of the old type and chassis with the wheel formula 6x6. Wheel much more than the road trucks, that makes it easy to overcome any off-road areas. The main technical characteristics are as follows:

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

• Engine – 740.10.210;
• Capacity – 210 HP;
• Chassis – KAMAZ-4310;
• Drive & ndash; full;
• Capacity – 7.5 t

This model of the truck «KAMAZ» there is a possibility to install cranes, domestic and imported, for example:

• SF-75C. The mechanism is going to Russia, however, the basic components and assemblies – imported (Finland, Sweden, etc.). Arrow – an elongated, marginal departure is listed at 8.7 m, capacity – of 2.85 tonnes at full reach – 0,85 t
• SF-65C. Produced in Russia. Arrow – standard, ultimate, flight – 7 m lifting capacity-2 tons, with full departure – 0,9 t

«KAMAZ-43118”

The Upgraded version of the truck «KAMAZ-43118” offers a refined cabin of enhanced comfort with a high roof. The model can be sold with a berth without him. Set by the factory engines were much more powerful. The crane is capable of loading and unloading of wood of different diameters, with a maximum length up to 6 m. the Most popular manipulators, which comes with the truck.

• HTML 70-01. Made in Russia. Arrow – standard, ultimate, flight – 7.3 m. load Capacity – 1.2 t at full reach – 0,68 t
• Epsilon C70L77. Producer – Austria. Arrow – standard, ultimate, flight – 7 m. load Capacity – 2,24 t, in a full departure – 0,94 t
• HTML 70-02. Made in Russia. Arrow – standard, ultimate, flight – 7.3 m. load Capacity – 1.8 t at full reach – 0,64 t
• Epsilon M100L97. Producer – Austria. Arrow – an elongated, marginal departure – 9 m. load Capacity – 3,2 t at full reach – 0,86 t

Specifications «KAMAZ-43118”

• Engine – 740.662-300 (the older models – propeller in Assembly 740.30);
• Capacity – 300 PS (260);
• Manual transmission – 154/ZF9;
• Drive & ndash; full;
• Chassis – KAMAZ-43118;
• Capacity – 9.5 MT (7.5 t);
• Curb weight – 20.5 tons (14.5 t);
• Useful volume of the body – 20 m³.

Updated appearance with recognizable features

As you can see in the photo, the timber «KAMAZ» (upgraded) received not only excellent performance, but also modern design. To work on domestic technology was not only comfortable, but nice.