Steel production: technology, methods, raw materials

Iron ore get the usual way: an open or underground mining and subsequent transportation to initial training where the material is crushed, washed and recycled.

The Ore is poured into a blast furnace and subjected to blasting with hot air and heat that transforms it into molten iron. Further it is removed from the bottom of the furnace into molds known as pigs where it is cooled to produce pig iron. He turns to wrought iron or processed into steel by several methods.

What is steel?

In the Beginning was the iron. It is one of the most abundant metals in the earth's crust. It can be found almost everywhere, combined with many other elements in the ore. In Europe began work with iron dates back to 1700 BCE.

In 1786, the French scientists Bertolli, Mong and Vandermonde pinpointed that the difference between iron, cast iron and steel due to different carbon content. However, the steel made from the iron, quickly became the most important metal of the industrial revolution. In the early XX century, world steel production was 28 million tons, which is six times more than in 1880. By the beginning of the First world war its production was 85 million tons. For several decades it has replaced iron.

The Content of carbon affect the characteristics of the metal. There are two main types of steel: alloy and non-alloy. Alloy steel refers to chemical elements other than carbon added to iron. Thus, to create stainless steel is an alloy of 17% chrome and 8 % Nickel.

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

Currently, there are over 3,000 catalogued grades (chemical compositions), not counting those created to meet individual needs. They all contribute to the transformation of steel the most suitable material for solving problems of the future.

Raw materials for steelmaking: primary and secondary

The Smelting of the metal, using many components of the – the most common extraction method. Charge materials can be used as primary and secondary. The main part of the charge is usually 55 % iron and 45 % of the remaining scrap. Ferro-alloys, converted cast iron and commercially pure metals are used as the main alloy element, to the secondary, as a rule, includes all types of black metal.

Iron ore is the most important and the basic raw material in ferrous metallurgy. To produce a ton of pig iron requires about 1.5 tons of this material. For the production of one ton of pig iron used about 450 tonnes of coke. Many metallurgical plants use even charcoal.

Water is an important raw material for ferrous metallurgy. It is mainly used for coke quenching, blast furnace cooling, steam production at the door of the coal furnace, the operation of the hydraulic equipment and removal of waste water. To produce a ton of steel requires about 4 tons of air. The flux used in blast furnace for extraction of contaminants from smelting ore. Limestone and dolomite are combined with the extracted impurities from the slag.

As blast and steel furnace, lined with refractory. They are used for lining of furnaces for the smelting of iron ore. Silica or sand is used for molding. For the production of various grades of steel used non-ferrous metals: aluminium, chromium, cobalt, copper, lead, manganese, molybdenum, Nickel, tin, tungsten, zinc, vanadium, etc. Among all of these ferro-alloys manganese widely used in steel smelting.

Iron waste received from dismantled structures, plants, machinery, old vehicles, etc., are widely used in the industry.

Cast steel

The Production of steel with use of cast iron is produced much more frequently than with other materials. Cast iron is a term which generally refers to gray iron, however it also identified a large group of ferroalloys. Carbon constitutes around 2.1 to 4 wt.%, while silicon is usually from 1 to 3 wt.% in the alloy.

Pig iron and steel is held at a melting temperature of between 1150 and 1200 degrees, about 300 degrees lower than the melting point of pure iron. Cast iron also shows good fluidity, excellent machinability, resistance to deformation, oxidation and casting.

Steel is also an alloy of iron with varying carbon content. The carbon content in steel ranges from 0.2 to 2.1 wt.%, And this is the most cost-effective alloying material for iron. Smelting steel from iron useful for various engineering and structural purposes.

Iron ore to steel

The steelmaking Process starts with the processing of iron ore. The rock containing iron ore is ground. Ore is extracted using magnetic rollers. Fine-grained iron ore is processed into coarse-grained clumps for use in the blast furnace. Coal is cleaned of impurities in a coke furnace, giving an almost pure form of carbon. Then the mixture of iron ore andcoal is heated to obtain a molten iron or pig iron, from which steel is made.

In the basic oxygen furnace, molten iron ore is the main raw material and is mixed with varying amounts of steel scrap and alloys to produce various grades of steel. In electric arc furnace, recycled steel scrap is melted directly into new steel. About 12% of steel made from recycled material.

The Technology of smelting

Melting - the process by which the metal is obtained either in the form of element or as a simple compound, from its ore by heating above the melting temperature usually in the presence of oxidants such as air, or reducing agents such as coke.

The technology for the smelting of steel metal, which is combined with oxygen, for example iron oxide, is heated to a high temperature, and the oxide is formed in combination with the carbon in the fuel exiting as carbon monoxide or carbon dioxide.
Other impurities, all collectively referred to as cores, are removed by adding flux, with which they unite, forming a slag.

The modern bathing suit steel used reverberatory furnace. Concentrated ore and a flux (normally limestone) are loaded into the upper part, and the molten matte (compound of copper, iron, sulfur and slag) is pulled from the bottom. The second heat treatment at the basic oxygen furnace is required for the removal of iron from the matte surface.

Oxygen-convection method

Oxygen Converter process is a leading process for the production of steel in the world. World production of crude steel in 2003 was 964,8 million tons or 63.3% of the total production. The production of the Converter is the source of environmental pollution. The main challenges are the reduction of pollutant emissions and reduction of waste. Their essence is to use secondary energy and material resources.

The Exothermic heat generated by the oxidation reactions during blowing.

The Basic process of steelmaking with the use of own reserves:

• Molten iron (sometimes called hot metal) from the blast furnace is poured into a large refractory-lined container called a ladle.
• The Metal in the ladle is sent directly for basic production of steel or pre-processing.
• High-purity oxygen at a pressure of 700-1000 kPa is introduced at a supersonic speed on the surface of the iron bath via water-cooled lances which are suspended in the vessel and is held a few feet above the bath.

The Decision on the pre-treatment depends on the quality of hot metal and the required final quality of the steel. The first converters with removable bottom that can be detached and repaired, is still in use. Have changed the lance used for blowing. To prevent jamming of the lance during the purge were used slit cuffs with a long tapering copper tip. The tips of the tip after burning burn CO formed during the blowing of CO₂, and provide extra warmth. To drain the used slag dart, refractory balls and slag detectors.

Oxygen-convection method: advantages and disadvantages

Does Not require the cost of equipment for the purification of gas, as dust, moisture, i.e. the evaporation of iron, reduced in 3 times. By reducing the release of iron, the rise in the yield of liquid steel by 1.5 - 2.5 %. Advantage is that the purging rate in this way increases, which makes it possible to improve the performance of Converter at 18 %. The quality of steel is higher because the temperature in the zone of purge is reduced, which reduces the formation of nitrogen.

The Disadvantages of this method of steel production led to lower demand for consumption, as it increases the level of oxygen consumption by 7% due to the high cost of fuel combustion. There is an increased hydrogen content in processed metal, I have some time after the end of the process to purge with oxygen. Among all methods BOF has the high shlakobetonom, the reason is the inability to monitor the oxidation process inside the equipment.

The open-Hearth method

The open-Hearth method throughout the greater part of the 20th century made up the bulk of the processing of all steel manufactured in the world. William Siemens in the 1860s the years sought means of increasing the temperature in a metallurgical furnace, having raised up his old proposal to use the waste heat generated by the oven. He heated the brick to a high temperature, then used the same path for entry of air into the furnace. The preheated air significantly increased the flame temperature.

Natural gas or atomized heavy oils are used as fuels; air and fuel are heated before combustion. Oven loaded liquid domain iron and steel scrap together with iron ore, limestone, dolomite and fluxes.

Furnace Itself is made ofhigh-refractory materials such as magnesite bricks for the hearths. The weight of open-hearth furnaces reaches 600 tons, and they are commonly operated in groups, so that the massive auxiliary equipment needed to charge the furnaces and liquid steel processing, can be used effectively.

Although the open-hearth process is almost completely replaced in most industrialized countries the basic oxygen process and electric arc furnace, they made about 1/6 of all steel produced in the world.

Advantages and disadvantages of this method

The benefits include ease of use and ease in obtaining a steel alloy mixed with various additives that give the material different specialized properties. Necessary additives and alloys are added directly before the smelting.

The disadvantages include reduced efficiency compared with oxygen-Converter method. Also the quality of steel is lower compared to other methods of smelting.

Electric arc

The Modern method of steelmaking using your own stocks is a furnace that heats charged material through an electric arc. Industrial arc furnaces are sized from small units with a capacity of about one ton (used in foundries for producing cast iron products) up to 400 ton units used for secondary steelmaking.

Arc furnaces used in research laboratories, may have a capacity of only a few tens of grams. Industrial temperature electric arc furnace can be up to 1800 °C (3,272 °F) while laboratory units can exceed 3,000 °C (5432 °F).

Arc furnaces differ from induction by the fact that the charging material directly exposed to the electric arc, and the current findings passes through the charged material. Electric arc furnace used for steel production consists of refractory lining, usually water-cooled, large size, covered with a retractable roof.

The Furnace is basically divided into three sections:

• Shell comprising side walls and bottom of the steel bowl.
• Hearth consists of refractory, which pulls the lower Cup.
• The roof of the refractory lining or water cooling can be designed as a section of the balloon or in the form of a truncated cone (the conical section).

Advantages and disadvantages of the method

This method takes the leading position in the field of steel production. Method of steel production is used to create high quality metal that is either completely devoid of, or contains a negligible amount of undesirable impurities such as sulfur, phosphorus and oxygen.

The Main advantage of the method is the use of electricity for heating, which makes it easy to control the melting temperature and reach the incredible speed of heating of the metal. Automated operation will be a nice addition to a great possible high-quality processing of various metal scrap.

The disadvantages include a large energy consumption.