Looking to the future BMW Vision

It would Seem that the German automotive leaders noticeably lose to the Japanese manufacturers in terms of development of alternative powertrains such as electric and hybrid. However, this is debatable when it is taken seriously by the Bavarian engineers. A striking confirmation of the model of the BMW Vision, a conceptual version of which debuted in 2009 at the show in Frankfurt.

The Car was created on a Central architecture, which is more typical for Lotus and Ferrari. The model has a low roofline and large glass area. According to company representatives, the coefficient of air resistance, the BMW Vision Efficient Dynamics is just only 0.22, which can not fail to impress. Equals car length 4.6 m, width – 1.9 m and height – of 1.24 m. the center console hides the spar and at the same time visually divides the interior into two parts, the front of which is located the driver's and passenger seat. Loading space of the model is 150 litres, although if necessary it can be increased significantly by folding the rear seats. On this basis, one can speak of practicality was demonstrated in the BMW Vision concept.

Despite all this, the main highlight of the car, of course, was its hybrid powerplant. It includes a three-cylinder engine capacity of a half liter that develops 163 horsepower, which is very respectable for this size, and two motors – one for each bridge. Thus, it turns out that, in fact, the BMW Vision is an all-wheel drive model. The total capacity of the unit, working in conjunction with a robotic 6-stupenchataya box 2 clutch reaches 365 horses. Powered via lithium polymer batteries consisting of 98 items. It is impossible not to focus on the fact that they are located under the center console and not take up valuable space. The process of charging can be done through the usual outlets. The car can travel on one only the electric motors 50 kilometers, which is enough for the urban environment.

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

All nodes in the BMW Vision were collected from alloys of aluminum. Moreover, the body structure was also used only lightweight materials, making the car weighs 1.4 tons. This is one of the reasons for the excellent speakers. In particular, acceleration to hundreds of takes only 4.8 seconds, and the maximum on the speedometer 250 km/h and it is limited electronically. Diesel fuel consumption is equal to 3.75 litres on hundred kilometres of run. Chassis standard other words, the same as all the Bavarian representatives – MacPherson strut front and dual transverse control arms in the rear.

Any way to see the BMW Vision is an unusual car in all respects. It is great to drive on the highway and shows the peak savings in city traffic. This is the perfect solution for the average family, but, unfortunately, not in the domestic climate. Moreover, this car will have to shell out a considerable amount of money. If you run the car on the conveyor is still going to happen, no doubt it will be a substantial breakthrough in the automotive industry.