What is the pin connection?

Date:

2020-03-18 00:00:18

Views:

608

Rating:

1Like 0Dislike

Share:

Table of contents:

As a key, pin joints are most often used in the nodes to transmit torque between the shaft and the workpiece. Their main feature is that they allow you to set the items with high accuracy. Run this type of connection with the use of special items — pins.

Where used

Apply the following connections are mostly only very small loads. Sometimes the pins are used for mutual fixation of the parts. There are also special cutting elements of this type used as a fuse. In addition to the nodes with the shafts, these products are very often used to connect end cap.

Another assignment pin connections - prosthetics in dentistry. With the use of such elements is the attachment of artificial teeth.

Pins on drawings

Types of tumblers

When you build different kinds of nodes use two main types of such products:

  • Cylindrical;

  • Conic.

Cylindrical pins, in turn, can be:

  • The spring split;

  • Grooved (with grooves).

Additional elements of design of the pins can be threaded holes or protrusions. They are used for removing products from blind holes.

Performed in the node functions there are three groups of pins:

  • Installation;

  • The guides

  • Mounting.

Pin connecting the cover and the housing

Pin connection: GOST

In most cases, when you build the nodes, use standard pins, made in accordance with GOST standards. For each specific type of products they own. Thus, manufacture of a simple form is regulated by GOST 3128-70 (cylindrical) and GOST 3129-70 (conical). Doing these details usually of steel grade 45. But GOST allows to use for this purpose, and material grades A12, 10 KP, 20 KP, etc. Expanded metal products are manufactured from spring steel. Sometimes the pins are of different types made from non-ferrous metals.

Of Course, governed by the standards and the nominal dimensions of these elements. Also standard provides and tolerances of the latter. This allows you to designate a model of the landing pins in the holes of the bushings, shafts, covers, and cases.

Designation of these products include:

  • The word “pin”

  • Product type

  • Dimensions;

  • Reference.

The Type is specified only if it is uniquely determined by the standard. In the field “dimensions” marked diameter and length. Sometimes here appear tolerance.

metal Pin

What is

Are connections of this kind of type split. When creating the first is drilling the parts. And it must be shared. That is, pre-formed parts to each other in such a way that they will be on the site in the future with his work. This is followed by the actual drilling.

In the resulting hole in the next step are inserted into the pins themselves. Cylindrical elements of this type are installed very tightly. That is, the pin always has a slightly larger diameter than the prepared hole under it.

In the case if the node is in the process of operation will be subject to repeated Assembly/disassembly, for it provided not cylindrical, and tapered pins. This allows to extend the service life of the structure. Since the cylindrical pins are inserted in the holes of the parts is very tight, after disassembly and reassembly node may lose its inherent initially performance. That is, the connection can be simply not too strong.

Pin connection in the node

Work the pins in the process of operation:

  • The slice (at the interface);

  • Crushing.

To these signs are settled on their suitability when used in a particular node. Wrinkling can undergo the working surfaces of the pins and connected details.

Advantages and disadvantages

In the manufacture of different kinds of nodes may be used in addition to the pin and wedge connections, keyed, splined. They all belong to the type of split. Very popular are also threaded connections of this kind with the use of screws, pins and bolts, profile, clanmovie. Each of these types has its advantages and disadvantages.

The advantages of pin connections referred in the first place:

  • Easy construction;

  • Easy Assembly/disassembly;

  • Precise centering of the parts.

The Lack of such compounds has generally only one. Drilled dowel hole in any case will continue to weaken the item. Clanmovie connection, for example, such a disadvantage deprived.

Types of detachable joints

At the same time and processed under the Jack pins should be very carefully. Otherwise, the product may later bend. The need for precision machining of holes increases the cost of manufacture of parts of node.

Features of the use of cylindrical pins

The Assembly of the pin connections with the bond of machine parts is usually performed with the use of smooth products. In the same way is usually done the usual fixation of the structural elements of the machine during its operation. In this case, the most commonly used smooth pins.

To fix the position parts can be used and expanded metal products of this type. Their main advantage, in comparison with the smooth, is that they do not require a scan of the holes. In the absence of additional fasteners such elements are more reliable in terms of loss. As the cone, the application of expanded metal of the cylindrical pins of the assembling connection in a subsequent process operation to carry out repeatedly.

Prosthetics with the use of pins

In a static connection cylindrical products installed with an interference fit. Moving them mounted with mandatory raskladom all. Spring dowel pins are mounted typically in a lightly loaded connections. Interference with their use is created by reducing the diameter of the hole. Installation types of pins in the connections fit mounted with an interference fit with one of the components. On the other they are mounted with the fit H7/h6 or H7/js6.

Tapered product

The Pins of this variety are made with taper 1:50. This provides sumotorrent in knots. These products are used for transmitting torque and for connection of the caps with buildings nearly as often as cylindrical.

A Simple conical pins are usually set in the through holes. In this case, when mounting them just driving on the opposite side of the connection. If the hole is not through, it is installed taper pin with thread for pulling.

Movable devices of this type are used in such compounds which in the process of operation of the mechanism can be subjected to jolts and shock loads. In addition, they are placed in those nodes in which parts move at very high speed. The ends of the pins after installation is usually diluted.

Features of the unit node

Drill parts to connect the pin, as already mentioned, in the collection. In some cases, these elements, in order to avoid the loss, addition fix. To do so, for example, when assembling dismountable joints. Additional fixation in this case provide a ring of wire 0.5-0.8 mm.

In a sealed connection pins usually Cernat. But in some cases can be used and products with bored ends. After Assembly, these pins resultsbecause.

If you use cone products, in some cases, the condition of samootverzhennyj may not work. Happens quite often, for example, the nodes exposed to vibrations or operating in conditions where the temperature varies sharply. In such compounds the conical pins are expected to consolidate further.

Selection and calculation of bolted connections

The Dimensions used for the transmission of torque products depend primarily on the diameter of the shaft (within D<0.3 d). On the strength of the shear pin chosen using this formula:

  • T CP=4T/dxd2шт.<[t SR].

Here T — torque, [t CP] — the allowable voltage cutoff. Last option look into special tables. Crushing with thin hub connection check according to the following formula:

  • CP Q=2T/d(d-d)d<[Q, SR].

Here /d(d-d)d — conditional area crumple, [Q CP] — allowable bearing stress for steel.

Sizes of cylindrical pin

Renovation

In Addition to shear or cut, in compounds of this type can also occur defects such as wear of the holes and the emergence ofcracks in the parts. Exploit the knots further in any of the four issues is not allowed. The repair node will have to be performed. Will work on site with a defect in any case very long.

Actually the repair of pin connections, of course, comply with certain standards. In most cases, the defective pins can be disposed of and replaced with new. However GOST admits, for example, to expand the worn holes for the other pin of larger size. It is also allowed to brew the old holes and drill new.


Article in other languages:

AR: https://tostpost.com/ar/business/21528-what-is-the-pin-connection.html

BE: https://tostpost.com/be/b-znes/39047-shto-takoe-shtiftovoe-zluchenne.html

DE: https://tostpost.com/de/business/38575-was-ist-stiftverbindung.html

ES: https://tostpost.com/es/centro-de/38337-qu-es-shtiftovoe-la-conexi-n.html

HI: https://tostpost.com/hi/business/23095-what-is-the-pin-connection.html

JA: https://tostpost.com/ja/business/21108-what-is-the-pin-connection.html

KK: https://tostpost.com/kk/biznes/39424-b-l-shtiftovoe-osylys.html

PL: https://tostpost.com/pl/biznes/41114-co-to-jest-shtiftovoe-po-czenie.html

PT: https://tostpost.com/pt/neg-cios/40768-o-que-shtiftovoe-conex-o.html

TR: https://tostpost.com/tr/business/35937-nedir-shtiftovoe-ba-lant-s.html

UK: https://tostpost.com/uk/b-znes/39879-scho-take-shtiftovoe-z-dnannya.html

ZH: https://tostpost.com/zh/business/22589-what-is-the-pin-connection.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

The stevedoring company is a... Definitions, characteristics, special cases

The stevedoring company is a... Definitions, characteristics, special cases

the Concept is quite common. Even if you do not know specifically what lies behind the phrase, you've met with this kind of activities under other definitions. However, let's get right to the point: find out what it is - a stevedo...

The American company Lockheed Martin (

The American company Lockheed Martin ("Lockheed Martin")

Transnational Corporation "Lockheed Martin" is the world's leading developer and manufacturer of military aviation and space technology, ballistic missiles, fire control systems, elements of cybersecurity. The company al...

Malfunction of the switch and the detection

Malfunction of the switch and the detection

you should Start with the fact that currently, one set of the switch is about 7.5 thousands of parts. The total mass of all parts is approximately 30 tons. At the time when the train is in motion, some of these sites are exposed t...

Wood wool: production, properties and applications

Wood wool: production, properties and applications

Packaging and decorative items today there are a lot. Some of them have not even heard and had no idea that it is possible thereby to use a familiar material. For example, wood wool. Even this phrase is puzzling. So let's see what...

Steel 12Kh18N10T: characteristics, deciphering

Steel 12Kh18N10T: characteristics, deciphering

One of the most common and used among materials is stainless steel 12X18H10T. Characteristics of the alloy, which we will discuss in today's article, largely contributed to this. If to describe the identity of this composition com...

A rich market in Saint-Petersburg: history, modernity, location, work schedule

A rich market in Saint-Petersburg: history, modernity, location, work schedule

In our age of hypermarkets and online shops, many began to forget about the markets. But 10-20 years ago there was buying everything from greens to the table to a new winter coat. But do not think that the markets died today. Thes...