How to make a machine for milking goats: dimensions, photos

Date:

2020-04-01 11:00:16

Views:

428

Rating:

1Like 0Dislike

Share:

Table of contents:

The Milking of small ruminants is an energy-intensive process, rather awkward and nervous for both parties. Animals, especially the young, to close the stall kicking and often spill a container of milk. A machine for milking goats — the most simple and optimal solution for convenient milking. This device immobilizes the animal during this process, which greatly facilitates the labor of the farmer. Machine buy ready-made or made yourself. Today, farmers and even large livestock farms choose this option, as in this adaptation of the goats can be milked either manually or by using special milking machine.

machine for milking goats

Why the need For a machine for milking goats on the farm?

If in the household less than 3 goats, then you can handle, so to speak, the old fashioned way. For farmers with large livestock machine — simply irreplaceable thing.

In Addition to the basic functions on this device it is possible to shear the wool around the udder of the animal, wash it, trim the hoof and carry out all the necessary hygiene procedures.

This is a simple and quite simple device is easy to make yourself, and the time and money spent on its production, will be compensated after a few months.

how to make a machine for milking goats

The advantages of using machine for milking animals

A Machine for milking goats eliminates considerable inconvenience arising from the milking animals, and provides a pure milk without any impurities and bacteria.

With the help of this device you can solve numerous problems on the facilitation of the work:

  • Immobilized, the animal will not be able to interfere with the milking process, to turn out a bowl of milk;
  • Ensured a comfortable posture of the person during manual milking, and he gets tired less;
  • When the automated procedure, a machine for milking goats makes it easy to connect the milking machine;
  • You can safely wash the udder of the animal, shave the hair around it and perform other procedures without damaging and without disturbing the goat.

However, it is worth considering the point that young goats during the period in which they are not accustomed to milking, very hard to get to stand still. In addition, the first time they will have to make the machine power. But over time, animals will get used and will become easy for yourself to go into it.

machine for milking goats photo

Design Features

The Main purpose of the bench - clamp the neck of the animal, so it wouldn't try to escape. The fixture has a goat at a height that is comfortable for the milker. If farm animals lot, the employee may be tired in an uncomfortable position. Before the fixture is installed trough with feed to a goat to attract and reassure. Because these animals are well trained and the process of habituation not take much time.

Recommended

Staff evaluation: system and methods

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

business activities. its essence and basic functions

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

machine for hand milking goats

Components of the fixture

There are many different variants of the milking machines, but each of them are:

  • The Platform, which is mounted on four or six supporting legs, the platform to prevent injury to the animal: it should be smooth and slip-resistant. The most optimum length of — 1.2 m
  • The Mechanism for clamping the head of the goat. It is mounted on the front of the machine on two supports.
  • A Small step for entry of the animal on the floor.
  • Feeder attached to the front of the machine, below the retainer clip. It serves to distract goats from the milking process.
  • Sometimes set a kind of grid or mesh that does not allow the animal to move in different directions rear part of the body.

A Machine for milking goats (photo attached to the article) must be set apart from the rest of animals, in a quiet location. It should be kept clean, remove manure, and occasionally wash.

the size of the machine for milking goats

How to make a machine for milking goats?

Good farmers very often make such a machine alone, it is not as difficult as it might seem at first glance. The main thing - to purchase all the necessary materials and to develop simple Assembly technology. The most difficult thing is to design a mechanism that holds the head of a goat.

For the manufacture of construction you will need timber 50x50, inch Board, mounting materials (screws and screwdriver).

how to make a machine for milking goats

Build the Foundation of design

Consider the cusp and the size of the machine for milking goats.

For the base of the machine need to prepare:

  • Four legs in size 5х10х30 see
  • Two side size 2,5х10х120 see
  • Two side, size 2,see 5х10х50
  • Two bars 5х5х50 see
  • Three planks for the platform: 2,5х18х120 cm or OSB-plate (its easier to mount).

machine for milking goats

Sequence:

  1. To assemble the base, please fasten the 2 legs to the end so that it passed through the top of the legs, flush with the upper ends.
  2. Do the same thing with the other side.
  3. Attach the resulting piece to the sidewall. Install and fasten two pieces of woodat a distance of 40 cm from the left and right margins.
  4. Check at the base corners. They should be smooth and straight (90°). If necessary, adjustable.
  5. Fixed the resulting designs boards for flooring. Its height and width, you can do that, depending on the desire to do the stairs or the ladder.
  6. Process and rounds all sharp edges to prevent the goats injuries.

Assembling the stand and clip

To make the racks and the mechanism for clamping the head of the animal during milking will need the following details:

  • Two racks of size 2,see 5х10х50
  • Four bar 2,see 5х10х50
  • Two strips 2,See 5х10х120

At the bar cut the corner. To do this, measure from one top corner to the left and 5 cm down 10 cm and then draw the line. Jigsaw sawing off the excess. Across to the racks, fasten bars: one upstairs, the other — 10 cm below. Retreating from the bottom of the feet and mounted the hole for the head of the animal. One rail needs to be fixed. The second set just a short distance and fasten it from the bottom bolt, then in three parts the drilled holes.

Make a mount for the feeder and the feeder itself. Most often it is not a very large box.

At the final stage of Assembly fixture:

  • Combine the base and the rack so that the bottom rested on the platform.
  • Fixed an angle bracket.
  • Determined by the design of the locking mechanism.

The Availability of materials and some knowledge of Assembly sequence design will allow you to quickly build the fixture. How to make a machine for milking goats, we have already considered. It will take approximately 2-3 hours.

Design can be installed against the wall and pinned. Very convenient to make a foldable and portable, to be in the warm time of year to milk a goat on the street. It is important to remember the safety of the animals, so all edges and corners of the design it is necessary to make rounded. We must not forget that the goats at first kick, until you get used to the procedure. With the third or fourth time problems usually don't arise.

The Machine for manual milking goats can make any size, as long as it was convenient to use. In this design, milking the animal can be on both sides or use a milking machine.

Operation design

Check the machine for convenience and safety. After manufacture of the restraint mechanism it is necessary to observe whether the animal self out put your head out. If stuck, the problem lies in the distance between the rails. This can be easily fixed by making the angle smaller.

The Head, neck and horns is necessary to fix the rope until the animal gets used.

To the stage it is desirable to do a step. But if the height of the platform is small, then the goat can jump on their own. Without steps device more mobile: it can be very easy to move outside or to rearrange the shed.

Machine tool must be kept clean. Then he can last a very long time and will greatly facilitate your work and give you free time for other things.


Article in other languages:

AR: https://tostpost.com/ar/business/21718-how-to-make-a-machine-for-milking-goats-dimensions-photos.html

BE: https://tostpost.com/be/b-znes/39231-yak-zrab-c-stanok-dlya-doyk-koz-pamery-fota.html

DE: https://tostpost.com/de/business/38741-wie-machen-die-maschine-zum-melken-von-ziegen-ma-e-foto.html

ES: https://tostpost.com/es/centro-de/38503-c-mo-hacer-una-m-quina-para-la-puso-nerviosa-cabras-las-dimensiones-la.html

HI: https://tostpost.com/hi/business/23285-how-to-make-a-machine-for-milking-goats-dimensions-photos.html

JA: https://tostpost.com/ja/business/21292-how-to-make-a-machine-for-milking-goats-dimensions-photos.html

KK: https://tostpost.com/kk/biznes/39603-alay-stanok-sh-n-sauyn-eshk-m-lsher-video.html

PL: https://tostpost.com/pl/biznes/41310-jak-zrobi-maszyn-do-udoju-k-z-wymiary-zdj-cia.html

PT: https://tostpost.com/pt/neg-cios/40965-como-fazer-a-m-quina-para-doyki-caprinos-dimens-es-foto.html

TR: https://tostpost.com/tr/business/36129-yapmak-i-in-makine-doyki-ke-i-boyutlar-foto-raf.html

UK: https://tostpost.com/uk/b-znes/40053-yak-zrobiti-verstat-dlya-do-nnya-k-z-rozm-ri-foto.html

ZH: https://tostpost.com/zh/business/28935-how-to-make-a-machine-for-milking-goats-dimensions-photos.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

How to amend Charter: step by step instructions

How to amend Charter: step by step instructions

Many companies sooner or later face the necessity to amend the Charter. Can change a variety of settings – name, location, Director General, the amount of capital. All such changes to mandatory register, transferred to the t...

When and how to water the onion ammonia

When and how to water the onion ammonia

every cottager has his own secrets for obtaining abundant and quality crop of onions. Often used the so-called ammonia water fertilizer for planting onions and other vegetable crops. This tool is fertilizing the plants and deters ...

Promising aviation complex distant aviation (PAK DA): Russian strategic bomber-rocket carrier of new generation

Promising aviation complex distant aviation (PAK DA): Russian strategic bomber-rocket carrier of new generation

how Soon shall we marvel at the excellent creation of our designers and the promising aviation complex of distant aircraft get not model, but real shapes? His predecessors have already demonstrated at MAKS-2017 in the town of Zhuk...

Leader drilling of wells under piles: technology, benefits and features

Leader drilling of wells under piles: technology, benefits and features

the Leader allows drilling to install piles in a vertical position in areas with dense soil. This method is most relevant in winter, because facilitates the driving of pile during the laying of the Foundation.the Popularity of suc...

“Poligrafoformlenie”

“Poligrafoformlenie”

Maksim Nikolaevich Yakovlev – St. Petersburg businessman, the Director of group of companies «Poligrafoformlenie”, Director, European representative of biotech Corporation Unhwа and partner online project ‘...

The building of the Main media center in Sochi

The building of the Main media center in Sochi

the building of the Main media center in Sochi was built in the Imereti lowland. Its main purpose was to make 15 thousand journalists during the Olympic games, to provide them with jobs and unfettered broadcasting of information t...