Round baler PRF-180

The Time of hay and straw for the winter – it's time the impact of labor on farms and on private farmsteads. In the old days the grass was cut manually and collected into stacks. It was a hard, exhausting work. Now to simplify the work created a variety of tools, including baler PRF-180.

The Mechanism clings to the tractor and in the process collects the grass and presses it. Hay rolls well kept, it is convenient to transport and to feed cattle.

Why you need a baler at the farm?

Forage for the winter you can do manually, but it requires a large amount of time and effort. Haymaking is carried out only in good weather, the ideal time for him - from the end of June to mid-July. Later, the grass becomes tough and less nutritious, therefore, it is desirable to remove it before it goes in the ear. During manual mowing of hay and the Assembly can not manage to do the work in the allotted time. In this case, the hay will be of lower quality, and the cattle will not eat.

Baler PRF-180 are quickly collected dried grass and turns it into rolls. Using his teeth he captures the vegetation, and then it twists. The finished rolls baler PRF-180 is winding ropes and pushes out. With the help of the unit can prepare up to 20 tons of dry grass for 2-3 weeks. The more hay will assemble the unit, the more dense the rolls will be output.

Roll baler PRF-180. Dimensions and characteristics

Excellent working characteristics of the pick-up press PRF-180 is allowed to show it in the competition “100 best Russian goods». The bale chamber of the closed type prevents loss of feed. The unit turns the rolls so that to preserve the access of air to the Seine, this allows you to avoid mold and dampness feed.

Recommended

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

The dimensions of the baler PRF-180:

• Width of 2.5 m;
• Length of 4.1 m;
• Height of 2.8 m.

The Unit rolls the straw into rolls weighing from 300 to 500 kg, and hay – from 450 to 750 kg. Width is 165 cm. the result is a steel coil with a length of 1.5 m, which have a diameter of 1.5 m.

For dressing baler uses the twine at the rate of 200 to 500 g per ton of raw material, which is slightly lower than the performance of similar models. For mounting Assembly to tractor used trailer hitch class trailer hitch-1ZH.

Safety in the operation of the baler

Pick-up refers to the potentially dangerous units and requires strict compliance with the operating instructions. When you neglect to work with the mechanism of injuries.

Safety Requirements in the use of the baler

• Before operating the tractor driver should ensure that no strangers on mowing;
• U-turns and moving from place to place it is important to produce a raised up;
• While working in the tractor cab must be free of people;
• During operation of the baler, you must observe the speed limit;
• When changing wheels you need to install the tractor on an even plane and lock in place, preventing its movement;
• Before removing the pick-up under the wheels of the machine you want to install the pads.

To check out the mowing tractor needs to check presence of fire extinguisher, spark arrestor, and a shovel.

Using the pressure of the baler PRF-180

Initially, you need to prepare to work the tractor to check the rearview mirrors, the serviceability of all mechanisms to create a stroke limitation of the piston cylinder hinge. On the pick-up install the rear lights and reflectors. Check and if necessary re-tighten bolting to bring the tire pressure back to normal. After you connect the baler to the tractor.

Using the press-a roll baler PRF-180:

• To conduct the test on a small number of revolutions, gradually increasing to necessary;
• Set the bobbin with twine for bale;
• The handle of the valve lift to position “floating” and to include the tractor PTO;
• When working to monitor the achievement of the required density in the coil to enable the coil;
• After completion of the procedure required to cut the twine with a knife and to unload the rolled up hay.

For better preservation of feed compression is recommended in the morning or in the evening.

Repair of the baler

Buying a baler PRF-180 b (or 180 used), you need to understand that it might need to be repaired. The new unit at competent adjustment is able to work 3-4 season without significant damage.

Baler PRF-180 is a simple and intuitive design, but a complex repair best left to professionals. If debugging give preference to parts of the manufacturer. Twine for tying coils use high quality. To prevent breakdowns in advance of the hay adjust and correct small problems, in this case the baler will last a long time.