The Industry in which most clearly expressed the use of prefabricated units, is engineering. Machine Assembly unit is smaller parts that create a complete vehicle.
The Use of such parts is carried out in different areas, but the essence of the technological process of Assembly does not change. It is also worth noting that before creating the unit is drawing, which is necessary to produce the item. The Assembly unit is a part, consisting of several parts, which, in turn, are connected by any Assembly method. Their production provides the manufacturer, which is engaged in the further Assembly of the finished product.
It is Worth noting that such a term as an Assembly, is not always used, more can be found another name - node. It is also important to note that for simplification of technological process of Assembly they were divided into smaller groups - sub-nodes and assign them orders.
As mentioned above, the Assembly of Assembly units is made in the same factory, which is engaged in installation of the final product. This is clearly evident in the field of engineering. However, some products undergo a complete Assembly is already at the place of operation, for example, cranes or heavy presses. But it is important to note that even in such cases, when the final stage of the Assembly object along with its mounting on the Foundation, the initial process of collecting the unit or its separate parts, that is, Assembly units will still be on the factory of this product.
Recommended
Staff evaluation: system and methods
Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...
How to start your own business: important aspects.
Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...
Business activities. its essence and basic functions
The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...
There are only a few cases that are the exception, when the final Assembly is not carried out at the factory. This applies, for example, to build airplanes or combines. The finished product argued that it is necessary to maintain the transportability of the units on the railroad tracks.
The First element that is the basis for any product that is going in production, is the basic Assembly and the part, or just the base part. There are constructive Assembly units and technological Assembly units (knots).
At the design unit understand the detail that is designed only with consideration of the functional principle. The terms independent or self-Assembly of the part is not particularly taken into account.
The Node or process unit is the product of an Assembly unit, the installation of which can be carried out separately from other component parts of the same Assembly or a whole product. Also, these nodes are able to perform their functions only together with other parts. For example, you can take the cylinder head or block.
It is Important to note that, to Assembly units there is a classification for the orders. To the first belong those nodes, installation of which may be independently, separately from other items. The same units that will get into the unit through and through the membership of any Assembly unit, receive a second order, third, etc.
Currently, for example, in engineering used the division of the Assembly into two stages is common, and the collection of individual units. The latter will include those operations, which is created from the Assembly units of the second, third order etc. of the node of the first order. To the General Assembly include all operations for which to create a finished Assembly of the pre-prepared units of the first order. In addition, this installation process can show the technological process at the stage of installation. It is determined on the basis of whether it is possible to implement the parallel Assembly of individual units and of the finished product from these details. If there is such a possibility, it significantly reduces the time to completion of the operation.
To create any object you must first prepare a design document that contains all the necessary drawings for the manufacture of components or finished product. There are several types of documents, one of which is called Assembly. It contains a drawing of the Assembly units, and other parameters necessary for the immediate Assembly and full control over the final characteristics.
It is Worth noting that Assembly drawings are divided into several types: for wiring, of Gidromontazh and pneumomassage.
Assembly drawings are considered to be usable only if they give full information about Assembly unit about its design, about how to interact with each other the various parts of this unit. Also, the paper should perform the function of visual technical documentation, which must be guided during Assembly operations.
In the presence of the Assembly drawing him carry out such operations as:
In addition to these data, if necessary, the drawing may contain information about how this is supposed to work the resulting product, and about how it needs to interact all its components. The development of such documents is carried out on each unit separately. Preparation of Assembly drawing for each of the nodes must be performed at the stage of preparation of design documentation, as this paper is required.
Source data which create Assembly drawings are General arrangement drawings and specification of the product. The details of the Assembly unit, but rather a drawing for each part that will be the end node of the first order must also be specified in the documentation.
Based on GOST 2.109-73, it is possible to say exactly what should contain each drawing.
Like most industrial operations, Assembly units specialists are divided into types. This separation is carried out according to characteristics such as the technological characteristics of all the types of nodes, depending on the method of their technological manufacture.
There are five basic types of Assembly Assembly unit is welding, brazing, bonding, formation of polymeric materials and by means of a threaded connection. In addition, there is a separation of permanent joints, detachable stationary, separable movable and Rethimno-all-in-one.
The first type includes such types of compounds kak:
To the second group belong such compounds kak:
The third type include the following compounds:
The last type includes following types:
All of the classifications that were mentioned above, are considered common, and therefore do not require any further explanation. But there are a few exceptions, which have additional explanation because of its method of classification.
The Harness Assembly units are products that consist of wires, cords or cables, they are fixed to each other with threads, ribbons, belts or with any other insulating means made according to drawings independently. However, you can also use materials that are performed on electrical circuits, not just drawings.
Electroradiology To include subassemblies that contain electrical elements, radioelements, wire, mounted and fixed on a corresponding basis of obtaining electrical contact by soldering, welding or wrapping.
Article in other languages:
KK: https://tostpost.com/kk/biznes/26965-b-l-rastyru-b-rl-k-any-tamasy-zh-ktelu-zh-ne-t-rler.html
Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."
Related News
Position on the document organization. An example of workflow in the organization
a Document is information is presented in a form consistent with the content and the purpose. Document is created with a purpose by someone for someone somewhere. But not always the source of the document and/or the addressee will...
Balancing machine: instruction manual. Error balancing machine
Balancing machine is a special equipment, which serves to equalize the static and dynamic unbalance indicator rotating parts of machinery. The unit consists of one or pairs of feet are placed in the workpiece, a rotational actuato...
Non-state examination of estimate documentation: what is it?
the Construction of any object can't do without estimates. They are necessary for the completion of construction. Non-state examination of estimate documentation – this is the study, analysis of construction papers. These in...
Check-list - what's that? Checklist: example. Check-list check
Creative, careful and serious attitude to work is an important part of modern business. However, creativity has always been closely associated with unforeseen costs of the work time, the uncertainty in the estimation of labor, the...
The structure of sown areas, yield and characteristics
the Basic means of production in agriculture is, of course, earth. It is considered the main source of reproduction in the industry needed to create raw materials and food products. And, of course, be used, the land needs most eff...
What make of gas? Technology of production of gasoline. Refinery
If to consider, what makes gasoline, of course, many can say that of oil. This statement is true, however, this is only the tip of the iceberg, and the actual process of production of fuel much more difficult.Gasoline at refinerie...
Comments (0)
This article has no comment, be the first!