How To Remove Tint Yourself

Only a few car owners refuse to toning the car. This is for a good explanation. Tinted Windows in summer and protect from excessive heat of the cabin, which significantly reduces the load on the air conditioner, and consequently facilitates the work of the engine. Besides, tinted glass does not transmit ultraviolet rays, so that the internal trim do not fade. On the windshield, covered with dark film, does not appear glare, but it reduces the probability of an accident.  Besides, tinted glass does not allow to consider what is in the car, so what – extent, protects from the increased attention of car thieves who steal valuables left in the cabin.

In Addition to its beneficial properties, toning has aesthetic qualities, it gives the car more presentable. But only if it is properly attached and there are no vaduthala, scratches and other defects.

 unfortunately, over time the appearance of the tinting is getting worse, and then her have to change. For this, you first need to get rid of old film covering the glass. Not everyone knows how to properly remove tint, so motorists often turn to specialized workshops for help. But the process of rastogirohan so simple that you can deal with them independently, not overpaying money to spare.  

Let's Consider step by step, how to remove tint yourself.

First, the glass from which you plan to make a film, it is desirable to warm up. In this case, the adhesive will become softer, and toning will be much easier to separate from the glass. For heating you can use a regular hair dryer. Not bringing it too close to the surface, to avoid overheating, evenly heat the glass before you can remove the tint yourself. Avoid heating plastic finishes.

You should Then lower the window about half, if we are talking about the side Windows of the car. So it will be much easier to separate the upper edge of the film from the glass surface. To separate the edge of the tinting better with a sharp knife.

Next there are two ways how to remove the tinted glass of the car. The first involves the removal of the tint film with one sharp motion. This requires both hands over the upper edge of the film and pull it down. Following the second method, the shading is gradually removed. With one hand slowly pull the film itself, and the second to gently separate the glue from the glass with a sharp thin knife or blade.

But in the first and in the second case, the glass is likely to remain traces of glue. So before how to remove tint yourself, prepare every needful thing in order to then fully clean the glass from the glue. This can help you with a sharp hobby knife to scrape off the glue residue from the glass. But after the knife on the glass can leave scratches, so it is better to use special solvents designed to clean glass after tinting. They can be purchased in any car shop. For these purposes fit undiluted rubbing alcohol.

If glue on the glass left a bit, then remove it with conventional means for washing, diluted in warm water. It is necessary to moisten glass with this solution and wipe thoroughly with a soft cloth.

Removing the tinting on their own, you'll save about $ 1000. That's the cost for this service is garages. But in order to rastvorova heated rear window, better to turn to professionals. Even knowing how to remove tint yourself, you can damage the threads of heating of glass and accordingly disable it.