How to make figures out of loom bands step-by-step description and photos

Date:

2018-04-13 03:00:25

Views:

1524

Rating:

1Like 0Dislike

Share:

Table of contents:

How to make figurines out of gum? This issue enjoys a great popularity, like weaving in General. In any city there are shops that sell bright rings. Girls often wear original bracelets, decorating bags and backpacks figures. All this can be done using elastic bands. Actions are not always characterized by complexity. Elegant products can be obtained easily enough. More should be said about the process of weaving.

A Little about the history of this fascinating entertainment

how to make figurines out of gum

Literally translated the expression, rainbow-loom-bands, it will sound like "rainbow loom". And this makes some sense, as the bracelet comes in a variety of colors. And answering the question of how to make things out of rubber bands, it should be noted that the braiding process very much like weaving art. Such enthusiasm appeared in America, where children are almost doing needlework. In order to interest them, was invented by this kind of netting. And the venture was successful. Children quickly enough imbued with the idea, began to show imagination, to invent an original combination.

Why is the question of how to make things out of rubber bands, has gained much popularity. This is due largely to the fact that the resulting products can be worn, place with their clothes, dress up dolls, give. They can do anything.

Gradually, the netting has taken root in our country. Colourful loom bands just could not stay without attention from the little kids. A relatively small cost, great training, helping to develop motor skills, perseverance and sincere passion – all this makes the process of weaving interesting and addictive.

Who might like weaving gum?

how to make figures out of loom bands on the loom

How to make figurines out of gum? Who is at all necessary? Such craze is suitable for everyone. Especially strongly it is able to interest students. The boys and girls can devise any scheme weaves. It is not necessary to spend a lot of time. In order to come up with something interesting, may be enough and one change. It is best to begin to weave seven years.

What tools and materials you can use?

How to make figures out of rubber bands on the machine? We must first understand which devices may be needed. To make friendship bracelets and figurines should use multiple tools and materials.

In the first place will need multi-colored silicone bands. They can differ in its texture and properties. At the present stage the selection there is quite large.

Simple machines for weaving are considered to be plastic slingshot (can have two or more teeth) and hook. In the role of a slingshot can be handy tools. For example, pencils. The hook can be replaced on the knitting device. However, experienced artists say that the plastic machine of this nature is more convenient. To implement more complex variants of the weave, you will need to use a special device. We are talking about transparent plastic base, equipped with several rows of columns.

As additional materials you can use a variety of pendants, beads, key chains. They simply weave in crafts.

How not to get lost in the process of weaving?

how to make things out of rubber bands on the slingshot

How to make bracelets and figures gums? Depending on the level and the number of the material used, these products can be divided into simple and complex. Begin to weave the best simple. The basic option is odnoimennyi bracelet. How to make figures out of loom bands on the hook? Consider the simplest version of woven bracelet.

Fold the elastic in half. In loops that will be formed at the same time, it is necessary to pass following the elastic. After that, it is necessary to bend and repeat the above steps. To learn this weave is simple enough. You can go after him to such patterns as "French braid". To weave is to use the machine. After mastering this device, you can answer a question about how to make things out of rubber bands on the slingshot.

If you are a beginner, you can quite easily get confused. To avoid this, use rubber bands of different, preferably contrasting colors. They should be placed in the queue. 1 band must be located eight. 2-I 3-– directly. After that the ends of the 1st bands should be removed and translated usingthe hook in the middle. You will then need to put the 4th strip, and the ends of the 2nd to remove and move to the middle.

Characteristics "French braid"

How to make different figures out of gum? For weaving "French braid" is characterized by the following sequence that defines the process of removing the material. First and foremost, it is necessary to fold the ends to the middle. Then you need to move the bottom rubber band from one end, and the average – with the other. After this it is necessary to put on a new strip.

how to make figures out of loom bands without loom

Complex patterns need to weave through the machine. In this situation you can use two rows, but you and everyone else. A favorite figure is considered to be the heart. It is often woven into the bracelet. To obtain this pattern, it is necessary to perform very simple steps:

  1. The Discharged first rubber band in the middle.
  2. Move the second rubber band to the right, and the 3rd – in the center.
  3. 4-u have to move to the left and dress 5.

The product is best to use rubber bands red or pink. At the present stage there is a huge number of different tangles. And their number is increasing.

Creating animals out of rubber bands. The basic principles of this process

How to make figurines out of gum? Without the machine to create original, complex product will not work. But it will be enough to learn to weave just one piece in a specific pattern to figure out how to weave the rest of the crafts. Then everything will depend on the imagination. For example, to weave a snake, it is necessary to use the machine in 3 rows. To form the hood of a Cobra, you'll need to add some rubber bands on the side. The eyes are made separately.

how to make bracelets and figures gums

Much more difficult to create a turtle. The process will differ in complexity. However, the result may be beautiful. To netting a turtle is to use a machine. Gum positioning recommended form. Different colors it is necessary to highlight the legs, head and shell. Weave figure with the help of the hook. In such a situation, to knit all parts of the body will need on hand.

In order to build Panda, you need to buy black and white material. You will also need to use a three-row machine. You need to dial the silhouette of a bear, make a head with legs black, and the middle – white. After that hook it is necessary to add length 2nd to 3rd layers. Due to this, the figure will have thickened and become more voluminous.

How to weave a barrette in the shape of a flower?

To weave the jewelry, you need to use a fairly simple technique. With a hook you need to put conventional rings bands, hold them in the middle. Remember that the more shades will be used, the brighter the product will turn out, which will resemble a flower. This accessory can be used as hair clips or bracelet.

How to weave a stylish bracelet?

how to make different shapes out of gum

To weave the bracelet, you should use the machine. Enter two pairs in column 7 gums each. Move them with a hook on the line for one. When one is ready, you can proceed to the next. As a result, simple actions will be received stylish bracelet.

Some of the recommendations that need to be consider

As already mentioned, the techniques of weaving there is quite a lot. They will depend on the number of bands, their color, the presence of special machine and of course skills. If I saw a beautiful bracelet complex weave, don't immediately try to repeat it, if you haven't done it. All recommended gradually.

What you should consider in the process of creating products?

  1. How to make figurines out of gum? On the fork, on pencils or knitting needles can be woven equally well. But these tools can be used only in the case that weave simple. Otherwise, it is necessary to use the machine. Especially if the figure is extremely complex weave pattern.
  2. You can Weave on the fingers-index and middle. This will require, first and foremost, to procure the gum to place them on the shades. Then begin to wear them on your fingers and twist, guided by the pattern. Such a braiding process may seem quite complicated. But it's not. After gaining experience, the actions will be executed on the machine.
  3. More convenient compared to pencils or knitting needles is a slingshot. It has the optimum thickness of the horns. And hands remain free. Moreover, it is possible to execute average complexity of the weave.
  4. If the hobby could interest and inspire you, you should think about buying a mini-lathe. With it you can create more complex productswhere forks and spokes do not work.
  5. Bracelets and figurines can be worn on their own, and you can give. You can even for sale to create a variety of products. However, if a fantasy regarding the weaving of the bracelets over, then proceed to weave a variety of shapes. They can be very complex and simple. Again, much will depend on the imagination.

You Can take part in numerous contests

figurines from gum photos and how to do

At the present stage in the youth social networks a variety of competitions and competitions. Their essence lies in choosing the best bracelet, original shape. And role does not play on the machine they were created or fingers. Worth a try yourself in this work, to understand how the process fun and interesting.

Conclusion

In this review was considered quite an exciting and interesting process, known as netting. What are the figures made of gum? Photos and how to do them, and especially important principles that should be considered – all this was presented in the article. Hope it will help you to answer these questions, to purchase their own understanding of the original process.


Article in other languages:

AR: https://tostpost.com/ar/hobby/3559-how-to-make-figures-out-of-loom-bands-step-by-step-description-and-pho.html

BE: https://tostpost.com/be/hob/6257-yak-rab-c-f-gurk-z-gumak-pakrokavae-ap-sanne-fota.html

DE: https://tostpost.com/de/hobby/6256-wie-man-figuren-aus-radiergummis-exemplarische-beschreibung-und-fotos.html

ES: https://tostpost.com/es/la-afici-n/6262-como-hacer-figuras-de-gomas-descripci-n-paso-a-paso-y-fotos.html

HI: https://tostpost.com/hi/hobby/3561-how-to-make-figures-out-of-loom-bands-step-by-step-description-and-pho.html

JA: https://tostpost.com/ja/hobby/3560-how-to-make-figures-out-of-loom-bands-step-by-step-description-and-pho.html

KK: https://tostpost.com/kk/hobbi/6259-alay-figura-kelgen-rezinany-adamdy-sipattamasy-zh-ne-foto.html

PL: https://tostpost.com/pl/hobby/6261-jak-zrobi-figurki-z-gum-krok-po-kroku-opis-i-zdj-cia.html

PT: https://tostpost.com/pt/hobby/6257-como-fazer-figuras-de-a-o-dos-el-sticos-descri-o-passo-a-passo-e-fotos.html

TR: https://tostpost.com/tr/hobi/6263-yap-yor-gibi-rakamlar-sak-z-ad-m-ad-m-a-klama-ve-foto-raf.html

UK: https://tostpost.com/uk/hob/6261-yak-robiti-f-gurki-z-gumok-pokrokoviy-opis-ta-foto.html

ZH: https://tostpost.com/zh/hobby/3864-how-to-make-figures-out-of-loom-bands-step-by-step-description-and-pho.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

How to make glow stick beautiful?

How to make glow stick beautiful?

Due to the fact that today a good half of the work for us machines do have more free time to do and create new things. And this applies to all spheres of human activity, because almost every one of us strives for absolute perfecti...

How to make nunchucks for training? Master military weapons from different materials

How to make nunchucks for training? Master military weapons from different materials

These nunchaku are quite expensive, so they become to many ordinary people simply can not afford. What to do if you want to acquire these weapons to defend themselves from bullies, but you have no way to buy this combat device? Th...

Balls

Balls "temari" how to do? How to embroider ball "temari"

the Art of “temari” – embroidering bright patterns on the balls. Patterns can be simple or abstract, with intersecting at different angles, shapes (triangles, diamonds, ovals, squares, ellipses, and so on). This ...

Jewelry made of polymer clay with your hands

Jewelry made of polymer clay with your hands

All women love jewelry. Once Coco Chanel said that the jewels created for those who have no sense of style. Those who understands fashion, choose jewelry. But how difficult it is to find the right decoration to an outfit in the st...

Bedspread patchwork with his hands. How to make a baby blanket patchwork

Bedspread patchwork with his hands. How to make a baby blanket patchwork

Patchwork-quilting. Thing, made in this technique, accentuate the style of your home and make the interior unique. Bedspread patchwork, stitched with his own hands, is no worse than shoplifting. If you carefully read this article,...

The most expensive books in the world

The most expensive books in the world

the Book – publishing, consisting of individual sheets, which in different ways, whether printed text or manuscript, applied to certain information.the Book as object collectionsthe book is a printed product, consisting of m...