Master class how to make a headband with stones and rhinestones

Headband with stones and rhinestones can be used for an everyday look, and perhaps for festive occasions. With his own hands made the accessory fast enough, and the material costs will be small. And you can be sure that no one will have this decoration.

The Rim on every day

Get Started:

1. Draw on paper a sketch of the brooch to the rim in the amount of 1 to 1.
2. Lay out a piece of felt.
3. Center carefully glue the first big rock.
4. Take a chain of small pebbles and one end of the stick close to the kristalik on the felt. Put around the main stone a few adhesive dots. Attach the chain along the contour of the kristalik to make a circle.
5. Lay out in front of a large rhinestone. Put a dot of glue over the resulting circle and glue the rhinestone tweezers. So, make another circle.
6. On the left side stick three small crystals. Then attach the chain and large stone. Glue them. You should have two circles.
7. Glue on the contour of a stone with a chain to the left, small crystals.
8. Make a similar circle with rhinestones on the right side.
9. Draw together the three circles on the contour of a chain of large stones.
10. Glue on Top of the chain of small stones.
11. Cut pochivshaya shape with rhinestones and stones along the contour.
12. Glue the item to the elastic band in the center.
13. Attach it to the head and measure the desired length so that the pin was slightly to the side. Cut off the excess.
14. Sew or glue the ends of an elastic band.

These headbands with stones and crystals with your own hands will be more elegant if, instead of elastic bands to use tape. Then the ends don't have to glue or stitch, they will be tied.

A Simple but beautiful wrap

To make a headband with stones and rhinestones, you will need a very strong glue. It is better to use a glue gun or “Point”, as it will quickly and efficiently cope with the task. Also need a frame wrap. It is best to look thin metal.

So, take the carcass of the rim and clean the surface using alcohol. Marker mark the places where straziki will begin and end. Put in front of him stones and crystals in the order in which they should go on the rim. Begin to glue the decoration to the Hoop. Do this carefully so the adhesive never over, and the stones were glued exactly.

Take the decor, the diameter of which is equal to and greater than the width of the rim. Then it will create the impression that stones and crystals attached directly to your hair.

Wedding headband with stones and rhinestones

Workshop:

1. Prepare the glue, bezel and decor. You can use ready-made items from beads and stones that will only have to connect among themselves. You can also make them yourself, starting from the first of the master class to create brooches.
2. Collect decorative items from beads and stones and then place them in front of him as they should look on the rim.
3. Glue each decoration in the correct sequence, as a substrate, use mesh or fabric.
4. Glue the finished ornament to the rim.

Festive headband ready.

Use a notched stones

Instructions on how to make a bezel with a notched stones:

1. Grab the metal frame of the headband, under wire color, pliers, notched pebbles (flowers) and beads.
2. Wrap a piece of wire and on one end connect the pebble. So adorn the bezel. Place the stones close together and point the wire in different directions. Do the decor at different heights.
3. Gaps in the bezel complete the wire, to do this, tightly wrap it.

Headband with stones and rhinestones ready.