The rocker-swing with their hands

At all times the best attraction for children was the swings. They develop children's sports skills, learn to communicate with peers in a playful way. An excellent example of this design is the rocker swing. This attraction can be purchased at the store and make your own. In the latter case, the manufacturing process involve children.

Design Features

Carefully consider how the balance wheel swing. The photo shown in the article will help you understand design features. As you can see, to make this ride quite easy.

Regardless of the design, the design operates on the following principle. The movable base is a horizontal bar, fastened to the rack in the center. Attraction is driven by the kids. They sit on the edge of the crossbar and pushes the ground down.

Planning Phase

Before you make the rocker swing with your hands, it is important to consider these points:

1. During the creation of the attraction, please note the mandatory requirements. The swing should be well polished and carefully fixed so as not to provoke injuries of children.
2. Attraction can be created from different material: plastic, wood, metal. Of course, be sure to consider who will use the rocker swing. Plastic is a great material for attraction, suitable for the youngest children. Guys older is more suitable swing wood or metal. If you choose durable material, this attraction can be enjoyed even by adults.
3. Be Sure to take care the safety of children. For this purpose, the edges of the movable rails should be equipped with seats and grab bars to draw.
4. If in the yard or at the cottage going to a lot of kids wanting to go, you need the length of the crossbar to increase. So you will be able to equip on both sides for 2 seats.
5. To simplify the rocking kids, it is recommended to attach under the bar on both sides of the spring support. Such detail can be recovered from the absorber of a car.

Recommended

Do you know what date Youth Day is in different countries?

In almost all civilized countries, there are various public youth organizations that represent the interests of girls and boys who are actively involved in social life. Of course, the State is the guarantor of their rights. Or, more precisely, the le...

JBL's portable Flip audio system: speakers for the soul!

JBL is one of the leaders in the global speaker market. Speakers from this manufacturer have been for many years delight fans of high-quality sound. The JBL Flip wireless portable speaker is one of the most prominent representatives of its model ran...

How to swaddle children: tips for young mothers

"Swaddle tight, otherwise your legs will be crooked!"; "Swaddle tightly so that you know who is the boss in the house!" - these tips from our grandmothers seem to us, young mothers, remnants of the past. There is also a diametrically opposite point o...

And don't forget your rocker-swing is made for children. So be sure to connect imagination and all his skill to create an amazing attraction. For example, toddlers will delight seat, designed in the form of cars or animals.

Simple version

Initially, let's look at how to make the easy model. To make this rocker-swing with their hands can even novice master.

They would need planks, beams and metal rod. This material is almost always close at hand.

Production Technology:

1. For the stand, select a thick plank, whose length is approximately 50 cm From its diameter depends on the magnitude of the swing.
2. The Beam lay horizontally. To give it stability, both sides of the nail at the bar. This will prevent the log from riding on the surface of the earth.
3. For the horizontal bar is better to get a Board with a length of about 2,5-3 m.
4. To while rocking she moved on the log, lock. To do this, in the center of the Board drill a hole. Secure the crossbar to the rack with a metal pin.
5. The edges of the Board, across, fasten wooden handles. For them the children will stay on during riding.

The Manufacturer will not take much time and does not require much effort. Now consider how to make more complicated model.

Materials and tools

So, if you decided to make the rocker swing from a tree with your own hands, you need to have the following:

• Thick timber stands for a length of approximately 130 cm;
• Board for a slat width of 15 cm, a length greater than 120 cm;
• 3 tube aluminum or iron (one of them needs to be wide);
• Stainless steel sheet zeleza;
• Syrupy;
• Pila;
• Molotok;
• Shurupovert;
• Swerl;
• Gvozdi;
• Kuvalda;
• Scissors for iron.

Progress

Let's Consider step by step, how to make the balance wheel swing.

1. The Board is designed for rails, measure with a tape measure. The result, divide by 2. So you will find the middle of the Board. Apply a markup token.
2. Prepare two strips of equal size. Secure them at the ends of the boards with screws. This will protect the baby from slipping to the bar during the swing.
3. Now go to the manufacture of handles for holding. It is necessary to cut off the same rail. They will need 4 pieces. In each of them with one hand on the center drilled holes.
4. Take the iron tube. Those that are smaller. In the holes of each pair of rails insert the tube. You have 2 great handle for holding.
5. Must be attached to the crossbar. To do this, from the edge of the Board with one and the other side will retreat approximately 35 cm This distance is enough that the child could sit comfortably. On the measured interval must be fixed with screws made of the handle.
6. To provide the best durability sothe holders are recommended near Board at the front to fasten the slats of a wooden plank.
7. Go to the production stand. It is used for timber. It must be very durable. If you took the beams, whose dimensions are 130 cm, then using the saw sawed it in half.
8. Using the hammer, hammer strut into the ground. For better strength they should be reinforced with concrete or stones. Be sure to note the dimensions of the rails and iron pipes.
9. Cut a piece of stainless steel of iron of 2 parts. They will mount the pipe. Flip the Board over. In the middle (outlined marker) put the pipe. Top lock pieces stainless iron. Carefully fasten the screws.
10. Now you need a tube with a plank fixed on uprights. To do this, use nails.

If desired, the rocker swing can be painted. Bright, beautiful attraction causes children a lot of positive emotions. And don't forget that such swings can be very original way to decorate, giving them a very unusual and even fantastic appearance.

Conclusion

Your kids will appreciate is made for them swing. The creation process is simple. As a rule, for their production spent more than 1 hour. But the enthusiasm and joy that they bring to the children will be pricked you for a long time.