How to make cage for rabbit detailed instructions, drawings and recommendations

To Contain the rabbits on the plot in different ways. A few years ago these animals were bred mostly just in cells. In recent times, more and more popular among owners of small farms becomes captive maintenance method of rabbits. The main advantages of this method are the rapid growth of livestock, reduction of attack and time-saving zveroboja. To make a convenient enclosure for rabbits in the garden possible including yourself.

What you need

To build the enclosure in the first place will need to prepare timber 50x50 mm. the material required for the manufacture of the frame. Actually the fence itself is easier and cheaper to make of the netting. A regular grid of this species very quickly to rust. Therefore, if the owner of the household economy wants a rabbit cage lasts as long as possible, he should buy colored netting.

Also for the manufacture of a cage for rabbits will need consumables-nails, screws screws. In addition, you will need to prepare cement and sand. For the construction of the shed will need plywood. If rabbits are supposed to be hold in winter, you should also purchase mineral wool. For the roof you will need roofing felt and boards.

What are the right tools

To build a rabbit cage, in addition to the materials you need to prepare and Instrumente:

• Shurupovert;

• Nozhovku;

• Molotok.

On hands should wear gloves. Next, let's look at how to make an enclosure for rabbits properly.

Schema cage

The Design of this pen for rabbits may be different. For a small number of animals equip a small enclosure representing a frame of the timber harvested in the form of a parallelepiped, covered with netting and covered with a wooden roof. The floors in this cage usually made of wood.

Recommended

Do you know what date Youth Day is in different countries?

In almost all civilized countries, there are various public youth organizations that represent the interests of girls and boys who are actively involved in social life. Of course, the State is the guarantor of their rights. Or, more precisely, the le...

JBL's portable Flip audio system: speakers for the soul!

JBL is one of the leaders in the global speaker market. Speakers from this manufacturer have been for many years delight fans of high-quality sound. The JBL Flip wireless portable speaker is one of the most prominent representatives of its model ran...

How to swaddle children: tips for young mothers

"Swaddle tight, otherwise your legs will be crooked!"; "Swaddle tightly so that you know who is the boss in the house!" - these tips from our grandmothers seem to us, young mothers, remnants of the past. There is also a diametrically opposite point o...

If rabbit is supposed to contain a lot, it makes sense to collect the cage for the rabbits to a large area. In this case, it is mounted approximately on the same technology as conventional fences made of mesh netting. The roof for a very large enclosure of boards to do, of course, problematic. Therefore, in most cases, breeders leave such zagonchike open top. Either draw them in netting.

This scheme can quickly make a very comfortable cage for rabbits with his hands. Drawing similar designs can be seen below. In order that the creatures could hide from the rain or scorching sun, on the one hand to such enclosure is attached to the shed.

Keeping and breeding rabbits in cages has some its own characteristics. In some cases, owners of personal plots run inside from all the animals. But it is much better to do inside fenced compartments for males and females with young rabbits. This will allow you to control the breeding of animals.

Installation Steps

Mounted enclosure for rabbits in several stages:

• Along the perimeter of the paddock pour in columns;

• The pillars are connected by beams at the top and bottom;

• The perimeter of the enclosure dug a trench depth of 70 cm;

• Mounted the wire-netting.

As a result, at the end of work (after backfilling of the trench) the grid will be buried in the ground. And therefore rabbits will not be able to make the climb and escape. Some owners of household plots do not bury fencing in the ground, and just dig in the enclosure a shallow pit and fill it with concrete (with small bias). After hardening of the cement mixture on top of the resulting "floor" is filled with a layer of soil with a thickness of about 20 cm, of Course, dig through the concrete rabbits also can not. However, this method, of course, only suitable for small yards.

The keeping of rabbits in cages big size suggests, as already mentioned, the arrangement of the shed. The latter is also going on the frame. Mineral wool is installed between the inner and outer layers of plywood. Don't have to do a shed big and tall. It is sufficient that inside the rabbits were free to get up “column”. The entrance to the barn doing such that an adult animal was free to enter into it. If rabbits are a lot of inputs should make some. The interior of the barn, opposite fenced for manufacturers seats the cage will also need to separated by the partition.

Assembly

Start work with the Assembly of the shed. First bring down the frame of the required size. Next, fill the floors of boards sheathe the shed with plywood inside and set partitions. Then mounted mineral wool and gidroizolyator. Then sheathe the shed outside. Then made the roof, also insulated with cotton wool. Sheathing it with roofing material. Attach the roof to the back wall of the shed on a loop.

Next, arrange the actual enclosure for the rabbits. The supports are installed into the excavated perimeter trench enclosure. Connect them with beams around the perimeter at the top and bottom. Then proceed to the installation of netting. Attach it to the wooden posts easierjust nails (bending them loop). Once the fence is ready, the trench is filled with earth or rubble. In the next step, tying the timber frame fastened under the upper netting.

Of Course, in the cage you need to make wickets. Collect them from timber and covered with netting. Offices the manufacturers make separate wickets. Hang the door on ordinary hinges.

Equipment for walking

The keeping of rabbits in cages — the process is relatively simple. The first step in the paddock and shed, be sure to lay the straw. The floor of the shed, you can close it. In the aviary this litter will need to do after running in it the rabbits eat all the grass. Feeders are usually installed only in the paddock. Make them easiest from the sheet of plywood, and nailed by its edges Reiki bumpers. The drinker is secured to the beam and in a cage, and inside the shed. So that young rabbits were not trying to dig holes in the corners of the range you can put a small closed boxes with done in their hole entrances.

Conclusion

Here in this way and going cage for rabbits. The contents, cultivation and propagation of these animals in this range will probably be successful. In the cage because rabbits usually feel much more comfortable than in the cells. And therefore, much better to grow and develop. If the owner of the infield will be attentive to the choice of the supplier of the feed, its Zverkov, in addition to everything else, and never catch any infectious disease.