Classification, types and sizes of batteries

Nowadays, batteries are the most common power sources for electronics and small appliances. Replacement occurs quite often. In order to make the best choice when buying a new galvanic element, it is necessary to pay attention not only on the size of the batteries and the manufacturer's name. In this article you will find answers to the following questions: what are the forms these power supplies? What are the different types of batteries by size? As marked cells and that you need to pay attention when buying, to the power source lasts a long time?

Types of batteries

The Classification of batteries is depending on the materials constituting their active components: anode, cathode and electrolyte.

There are five types of contemporary sources pytania:

• Solavie,
• Melochnye,
• Chutnee,
• Serebrjanyi,
• Litalie.

Types of batteries by size are listed below. And now consider in detail each of these classes of cells.

Salt batteries

Zinc-manganese battery was developed in the second half of the twentieth century. They replaced the pre-existing manganese-zinc power sources. The size of batteries has not changed, but the technology of the manufacture of these cells is different. In a saline power supply in the electrolyte is a solution of ammonium chloride. It has electrodes made of zinc and oxide of manganese. The connection between the individual electrolytes are carried out using the salt bridge.

The Main advantage of these batteries is their low cost. These galvanic batteries are the cheapest among all.

Disadvantages of zinc-carbon batteries:

• In the period of the discharge voltage is significantly reduced;
• Storage time is small and accounts for only 2 years;
• By the end of the guaranteed period of storage capacity is reduced by 30-40 percent;
• At low temperatures the capacity decreases to almost zero.

Alkaline batteries

These batteries were invented in 1964. Another name for these power sources-alkaline (from the English word alkaline, which means it “alkaline”).

Recommended

Curtains in the nursery for a girl. How to make the right choice?

The children's room is a separate world in which the child lives. Since he spends a lot of time there, parents should take the issue of interior design very seriously, paying attention to every detail. In this article we will talk about how to choose...

Do you know what date Youth Day is in different countries?

In almost all civilized countries, there are various public youth organizations that represent the interests of girls and boys who are actively involved in social life. Of course, the State is the guarantor of their rights. Or, more precisely, the le...

JBL's portable Flip audio system: speakers for the soul!

JBL is one of the leaders in the global speaker market. Speakers from this manufacturer have been for many years delight fans of high-quality sound. The JBL Flip wireless portable speaker is one of the most prominent representatives of its model ran...

The Electrodes for such batteries made of zinc and manganese dioxide. The electrolyte is the alkali potassium hydroxide.

Today, these batteries are the most common, because they are perfect for most electronic devices.

Dignity alkaline food sources:

• Have greater capacity in comparison with saline and, as a consequence, a longer service life;
• Can work under low temperature environment;
• Possess superior integrity, that is, the probability of leaks is reduced;
• Have longer shelf-life, which is 5 years;
• Have a reduced self-discharge rate compared with carbon zinc batteries.

The Disadvantages of alkaline food sources:

• The discharge period is characterized by a gradual decrease of the output voltage;
• Sizes of alkaline batteries are similar to the settings of salt, but the cost and weight of alkaline power sources above.

Mercury batteries

In a battery the anode is made of zinc, cathode – from mercuric oxide. The electrodes are separated in a separator and a diaphragm, which is impregnated with 40% solution of potassium hydroxide. Lye is used here as the electrolyte. Thanks to this combination, this power source can work as a battery. But during cyclical operation of the galvanic element is degraded, the capacity is reduced.

Advantages of mercury batteries:

• Stable voltage;
• High performance capacity and energy density;
• Ability to work at both high and low temperature environment;
• Long shelf life, which is 10 years.

Disadvantages of mercury supply sources:

• A high price;
• Possibility of hazardous exposure to mercury vapour in case of depressurization;
• The need to establish collection and recycling.

Silver batteries

In a silver battery for the production of anode use zinc for the cathode-silver oxide. Electrolyte is the sodium hydroxide or potassium hydroxide.

This category includes batteries for watches, the dimensions of which are given below. Advantages of silver supply sources of the following:

• Voltage stability;
• The presence of high levels of capacitance and energy density;
• Immunity to ambient temperature;
• Long service life and storage.

The Disadvantage of such batteries is their high cost.

Lithium batteries

In a battery cathode made of lithium. It is separated from the anode through the separator and the diaphragm, which is impregnated with the organic electrolyte.

Advantages of lithium batteries:

• Constant voltage;
• High capacity and energy density;
• Independence of power consumption from the load current;
• Low weight;
• Long term storage that is up to 12 years;
• Immunity to temperature extremes.

The disadvantages of lithium batteries can be attributed only to their high cost.

As mentioned above, the power sources have different chemical composition. Also significantly differ from each other shapes and sizes of batteries. Battery cells have different heights, diameter and tension. Consider the classification of batteries according to these parameters.

Classification of batteries by size

Depending on the voltage, height, diameter and form, power supply a certain way to organize. One of the most popular systems of classification is American. It is presented in the figure below. Such standardization offers the convenience, it is used in many countries.

According to the American system the power sources are classified as follows:

In addition to the class specified in the table, the power sources have a common name that is used in people. For example, the size of AA batteries is comparable to the size of the human finger, so «folk» the name of this galvanic cell – “AA” battery, “two”. But the power supply C is called, in common parlance, "Thumbelina". Galvanic element D is called the “barrel”. A AAA battery, the size of which is similar to the parameters of the smallest finger of a man, not for nothing called the “mizinchikov” or “triple A”. Power source PP3 called «crown».

Electronics are widely used miniature round batteries, sizes and names of which differ by variety. More information about silver “the pill” and the classification of such power sources is shown below.

Batteries “the pill”: the sizes and names

Another name miniature round batteries-dry cell. These power sources consist of an anode made of silver oxide, zinc cathode and electrolyte. The price is a mixture of salts, which has the consistency of paste.

Different manufacturers often assign such power of designation, which differ from the standard. The following is the classification table that shows the alternative names and sizes of watch batteries.

These miniature silver “the pill” are forced to work the mechanisms of the modern wristwatch. When it comes time to replace the battery, you can face the question, what power supply will fit in this situation? For example, if hours used item 399, you can instead put a miniature battery, which, depending on the manufacturer can have the V399, D399, LR57, LR57SW, LR927, LR927SW or L927E. Under such names will be “the pill”, whose height is 2.6 mm, and the diameter-9,5.

Battery Size – this is not the only parameter you should pay attention to when buying power supplies. In order to learn how to decode the information, which is located on the galvanic elements, you need to familiarize yourself with the basic principles of their markings.

Marking batteries

The International electrotechnical Commission (IEC) created a system of notation, according to which we should label all the batteries. On the housing of the power supply should be given information about its energy consumption, composition, size, class and voltage. For example, batteries, pictured below, a closer look at all label elements.

The Information specified on the power source shows:

• Electrical charge of the galvanic cell is 15 A*h;
• Class-power source-AA, that is “AA” battery-powered;
• Voltage 1.5 Volts.

And what does the inscription "LR6"? It is, in fact, there is a label, which gives information about the chemical composition and the class of the power supply. Types of batteries have the following letter designations:

• Salt & ndash; R;
• Alkaline-LR;
• Silver – SR;
• Lithium – CR.

Classes of batteries are indicated by the following figures:

• D – 20;
• C – 14;
• AA – 6;
• AAA – 03;
• PP3 – 6/22.

It is Now possible to decipher coded LR6 in the above illustration. The letters here indicate that it is alkaline galvanic cell, and the number indicates the size of “AA” batteries, that isindicates whether power supply to the class AA.

Applications and features select batteries

First and foremost it should be noted that all battery cells meet the requirements of unification, that is, the consumer can easily replace the power source of one manufacturer of a similar battery of another. There is only one word of caution: should not be used in one device current sources, manufactured by different companies or belonging to different types. This will significantly reduce the battery life.

When choosing the power sources you need to pay attention to the packaging. Often the manufacturer specifies the device in which it is recommended to use these batteries. If such information is not provided, the tips featured below will help you make the right choice.

Salt batteries have small capacity 0.6-0.8 A*h and used in devices with low power consumption. These may be remote controls, thermometers, electronic, testers, scales or kitchen. Also salt elements can be used as batteries for watches. The amount of such current sources are similar to the corresponding parameters alkaline, but their application varied considerably. After all, if you use carbon zinc batteries in devices with an electric motor, flashlights, or cameras, their lifespan may be only 20-30 minutes. Such cells are not designed for heavy loads.

Alkaline batteries have a fairly big capacity 1.5-3.2 A*h. This allows to successfully use them in devices that have high energy consumption. Such devices include digital cameras with flash, flashlights, children's toys, office phones, computer mouse, etc. Batteries designed specifically for cameras, faster give energy. This has a positive impact on speed cameras. If you use alkaline power supply in devices with small power consumption, then the batteries will show a great result, their service life will be several years.

Twenty or thirty years ago mercury batteries widely used in devices such as electronic watches, heart pacemakers, hearing AIDS, devices for military use. Today, the use of these power sources is limited. In many countries it is forbidden to produce and exploit such galvanic elements due to the fact that mercury is a toxic substance. In the case of the use of these power sources is necessary to organize separate collection and recycling in accordance with safety requirements.

Silver batteries are not widespread because of the high cost of metal. However, miniature power sources of this type are widely used in watches, motherboards and notebook computers, hearing AIDS, musical greeting cards, key rings and other devices where you cannot use the batteries of a larger size.

Lithium batteries have a longer lifetime compared with even the best alkaline. Therefore, these power sources are used in devices that have high power consumption. This can be a computer and photographic equipment, medical equipment.

Conclusion

Battery-powered – a product that, despite its small size, can be dangerous. It is impossible to disassemble the power supply, throw it into the fire and, of course, attempt to recharge. In the web you can find tips on how to give the battery a second life. Do not attempt to carry out such experiments, because it can be dangerous.

When you buy new batteries you should pay attention not only to the manufacturer and appropriate size, but also on the chemical composition of food sources. It needs to be able to read the labels. Properly fitted, the batteries will last a long time and with high quality.