How to catch a beaver? Effective ways

Meat, skin, fat jet and the beaver are quite valuable and will be useful in any economy. Only the animal needs to sound, so the hunters began to use different ways of catching beaver in different seasons. Only in this case is not so simple, so strong and smart this animal is a beaver. How to catch how not to be outlawed, what methods of fishing is better – you can read about it in this article.

Weapons – pros and cons

Probably the most common way of getting a dead animal – the use of a gun. But not always, this method brings some advantages.

Pros:

- Quick killing of an animal. The hunter saw a beaver shot, got the dead animal. No need to bother.

- the Range of a bullet. The animal is far away? Accurate shot will allow you to hit the target and not to miss the prey.

- Simplicity and ease of use. Weapons are not that heavy and do not require additional knowledge, so it is quite simple to apply.

Cons:

- a Dead animal. Sometimes it is necessary to get the animal alive.

- damage to the skins. If you want to get a skin, then the gun will not work, because the bullet or shot will violate its integrity.

Trap

When it comes to how to catch the beaver, then it is necessary to pay attention to kapkany hunting. Of course, in this case there are complications, so they just need to be ready.

Trap Selection

The Beaver – strong and fast animal. It is therefore necessary to choose a good trap. The seventh trap with rounded arches will be the best option. Of course, you can look at other options of catching beaver, but do not forget about the physical data of the rodent.

Install Location

Before installing the trap, you must carefully inspect the area and find the most favorable place, where often appears the beaver. How to catch in a trap after a good exploration, it will remain a matter of time. During the observation you should pay attention to the place where the beast comes ashore, where there is a place for food and other materials for his life.

Direct installation

At first glance it might seem that to set the trap is quite simple. Only in reality everything is different. If we talk about how to catch a beaver in a trap, it is also worth mentioning the maximum caution of a hunter. In addition, we must not forget about their own safety.

In most cases, this tool for hunting deep in the water, so you need to mount it so that the animal does not see the danger, but at the same time that the time mechanism worked. At shallow depths, you can put a trap on the bottom, and if it is installed on the place where is quite deep, it is necessary to resort to using wooden stakes and rope so that the rodent could not go ashore.

For the masking, you can use special items, as well as natural conditions. You can just shake the water to the sand and other debris covered the trap.

Catching beaver in winter

Perhaps, many people believe that the beaver is asleep in the winter. Only actually this does not happen, the beavers simply reduce its activity, therefore it is necessary to address the question of how to catch beaver in the winter.

It Is necessary to say that the winter hunting is difficult and costly, especially in the physical plan.

Training hunting

Directly winter fishing rodent starts in the fall. When the reservoir has not yet appeared the ice, you need to find the deepest place where the settlement of beaver. And to celebrate it. This is necessary in order to winter made it easy to find a place for future installation of traps.

When the ice is of normal thickness to withstand the weight of a person, you can begin the hunt. In the marked place, you need to make the hole the size of 50x50 cm is Necessary to find a small tree trunk of appropriate length. One end of the prepared wood stuck to the bottom of the reservoir so that the trunk stood at an angle of 35-45%, and the other should stick out above the ice.

Setting the trap

The Answer on how to catch beaver in the winter, involves the use of a trap. Accordingly, after preparation of the hole should be proceeding with the installation. Only in the first place is to make a special strong pad to the mechanism were established. A great helper in making it may be a small chock.

You Also need to prepare a broom from aspen branches (bait for beaver). You can of course use other wood, butit is best to still take the aspen branches which should not exceed the length of 1 meter.

After all the necessary arrangements to set a trap. A platform with a trap put on the middle of the hole, then at a distance of about 50 cm down the broom. After this it remains only to wait for the beast.

Other ways of catching beaver

Trap – the most effective and popular option. There are also other ways how to catch beaver. Before the advent of the above mechanism, the hunters caught him with dogs. They chased the animal from his home, and the dogs drove it to the location you set the trap or loop.

At the moment we can talk about how to catch the beaver loop. Only this method of catching an animal is illegal, and the complexity is much more than fishing with the previously mentioned mechanism.

The Period of hunting of the beaver

To avoid the attention of law enforcement, it is necessary to remember about the period of the hunt. Basically in all regions of the beaver hunting is allowed in the cold season, namely the autumn and spring.