Coating plate: its manufacture, the advantage and scope

The Concrete slab coatings are construction products, which are used to complete the construction of the box of the building. They are most often used for the construction of bescherdachnye buildings, making the roof, which then for greater integrity cover a variety of waterproofing materials.In addition, the coating plate is perfect for different kinds of insulation materials, they are easy to install drains and other systems. These products are divided by type of installation (monolithic and prefabricated) and structure (standard ribbed). Usually both types of plates are used with the use of tendon. Despite the fact that the roof does not have any large load, it should have durability, and a method using reinforcement is optimal for achieving this goal. Most commonly for roof mounting choose plate cover ribbed because of their durability and ease of finishing.For the manufacture of these building products using armoede tempered, covered with concrete throughout its area. The concrete layer is not less than 2 inches in thickness. Due to its properties of reinforced concrete floor slabs outperform other materials such as water, the level of fire safety, resistance to natural factors, increased strength. The last distinct advantage is worth paying special attention to those who in the future intends to build on an additional floor. This material will serve as a base for the future floor.If the technical plan of construction calls for the erection of any structures (e.g., chimney pipe, direct-flow hoods, etc.), for the realization of these purposes the coating plate with a hole.The Standard size of the specified products: m 3x6 or 3x12 m, thickness - from a minimum of 25 cm to 45 cm (but there is the possibility of making more of thick plates with cavities for reducing the weight of the slab, reducing the load on the Foundation. The composition of this concrete structure also includes metal elements, they are used for welding with the same elements of the other plates, which gives an increase in the strength of their bond. The coating plate is placed after the construction of load-bearing walls. Installation is carried out with the help of a construction crane. The delivery of these products to the place of installation is on the trucks.

The coating Plate is reliably, cheaply, quickly, efficiently; it is suitable for any type of construction of various buildings. If you need to do well industrial or drinking, for such purposes use the concrete ring.

Remember that for the realization of higher quality and proper installation of the specified products it is necessary to consult specialists that have certain skills in this field.