Anchor bolt with nut: scope and varieties

Anchor bolt construction is called a special unit used for fastening of pillars and columns to the concrete Foundation. Used this connection in other places where the required special strength of the final design. In addition to the anchor bolt, there are several kinds of anchors-drop-in, wedge, krukovii etc. set them apart from other design features, and usability.

Anchor bolt with nut is needed to attach the heavy building elements, structures subject to heavy loads, etc. to solid concrete or brick. They fix, for example, gates, stairs, cable trays, piping, steel structures etc. are Often the fasteners used for fixing heavy hinged construction-structural elements.

Manufactured anchor bolt with nut made of steel and cover the top protective layer of yellow zinc. This rod, which is applied to the thread, with cone-shaped tail. It is equipped with a movable coupler, having a longitudinal slot, and a washer. Nut-hex.

In addition to the mounting structures of special importance, anchor bolt with nut is often used where there is a need from time to time to dismantle the construction elements. This periodic disassembly, for example, may need preventive or routine maintenance. In everyday life this kind of attachment is most often used for installation of suspended ceilings, door frames and window frames. Anchor bolts attach the strut of the frame-frame homes to the Foundation, etc.

Fixed anchor bolt with nut in the following manner.&When the nut is tightened, the clutch begins to crawl on the tail, resulting in bursting. Due to the fact that the deformation of the coupler at the base, the rod is almost the entire length of the bolt. Instead of the nut anchor may be equipped with a hook or ring.

The technology features of the connection details with the use of such fasteners is the need for accurate calculation of the depth of the holes for anchor bolt with nut. This is because the wedge must rest on the bottom, otherwise the anchor can fall too deep.

The thickness of the concrete or brick structure, to which you will mount must be greater than the length of anchor bolt (to avoid punching through it). In order that the grip is quite reliable, anchor bolt nut should be mounted in places where in slabs or bricks, no hollow areas.

Finally, I will provide a little General information. The anchor means in English the “anchor” that could not be better reflects its purpose. The required clutch torque in this fastening is provided not directly but through a kind of anchor.

To order this design proved durable, need to use the anchor, which you can buy anywhere near the hardware store. This is one of the most reliable fasteners. A wide range of applications anchor bolts has made them one of the most demanded among buyers of construction fasteners.