Installation of metal doors with their hands: manual and installation

Installation of metal entrance doors with your hands in a wooden house-complex process, requiring compliance with certain rules and nuances, and is highly relevant for owners of private property. Because the material for the construction of the building is used is special, it requires proper handling and accounting of some of the subtleties.

Wooden houses

At first glance it seems that the installation of metal doors with their hands is not anything complicated, especially if it is conducted in a wooden house. In practice it is not so: it is necessary to take into account the different nuances associated with the peculiarities of the material:

• Shrinkage. The lower box of a building subjected to strong loads in the first five years after construction, which can lead to shrinkage and distortion of the sizes of apertures of doors and Windows.
• Dynamic. During the operation the wood is exposed to environmental factors. Temperature changes and high humidity can cause changes in the provisions of the framework.
• Fastening feature. Installation of metal doors with their hands in Brusova house affects the wood, unlike concrete or blocks. At installation of bolts and anchors necessary to maintain a certain angle.
• Strength. Located next to a metal door boards have greatly diminished after the installation, can I use thieves get into the house to bypass the door itself.

The benefits of steel entrance door

The front door, made of metal, have some advantages in comparison with similar structures of other materials:

• Security. Stainless steel protects against intrusion and hacking.
• Strength. Resistance to mechanical influences.
• Insulation. Heat retention in the house without the use of additional materials.
• Fire retardant. Inhibits the spread of fire and smoke, which is especially important for built from the wood of buildings.
• Resistance to moisture.
• Long lifetime.
• Wide range. You can pick any door model.

Installation of metal doors with their hands – the best option not only for wooden buildings, but also for the apartment building.

Required tools

For the installation work requires special tools, especially if they are undertaken without the involvement of construction crews.

Installation of metal door with his hands in Brusova the house should be carried out so that the canvas is opened outward in accordance with the rules of fire safety. In addition, taken into account the technological peculiarities of the material from which the building was constructed.

Installation of metal entrance doors in the house requires the following tools:

• Small scrap.
• Building.
• Hammer.
• Claw hammer.
• The Chainsaw and handsaw, if the building is wooden.
• Chisel.
• Screws, steel rods or anchor bolts.
• Construction foam.

If the supplied doors are missing anchor bolts, buy them have their own.

Installation Steps steel doors

All work starts with removing the old fabric, if any, there was in the house. Installation of metal entrance doors with your hands step by step as follows:

• Removed the old canvas.
• Prepared the doorway.
• Mounted a new metal door.

The dismantling of the old canvas

In wooden buildings the removal of the front door to be the following:

1. If the door leaf is previously mounted on collapsible hinges, his taunt bottom scrap and removed from the hinges. In the case of non-separable fasteners unscrews the screws with a screwdriver or a drill.
2. Wooden doorframe dismantled very simple – first removed all the fasteners, then detach and cut the side stand. The upper and lower parts are then easily removed.
3. Metal box saw grinder, along with the anchors with which it is fixed in the opening.
4. Released aperture is cleaned of dust, dirt, debris construction foam and other materials.

Installation of metal entrance doors with their hands: manual

The Size of the aperture with the right preparatory work to exceed the size of the box a few inches. This is necessary in order that the box can be flattened.

The Metal structure is fixed in two ways:

• With mounting plates.
• Through the holes in the profile box.

Mounting boxes and canvas

For metal doors the role of the leaf performs steel frame. Before installing it into the opening, the joints are thoroughly compacted by attaching insulation – for example, mineral wool. Many doors are pre-insulated box that simplifies installation and does not require additional actions.

As the metal door – very heavy construction, they should be set with the assistant. In a wooden building frame rigidity needs to be bigger than usual to withstand the load, so it is advisable to choose the weldment model, in which the thickness of the metal sheet is at least 2 mm.

Box door aligned on the level and secured with bolts 150х10 mm, the gaps zapenivayutsya. After drying, the foam work on the installation continue.

Installation of metal entrance doors with their hands ends with the hanging of the paintings. in most cases, to do this, use either concealed or external hinges that attach both to canvas and to the floor heating. The first option is more preferable as hack such a construction is almost impossible.

The Optimal method of placement of doors – in four loops, allowing evenly distributed pressure. The lower bolt is located further back than the upper, the Central – at equal distance from hinges. Trims cover the joints in the wall. Leave a small space in a mandatory manner in case of the offset of the canvas.

High-Quality installation of metal doors with their hands can only be done if you have the necessary tools. It is not necessary to proceed with the installation if the wooden house has not passed the process of shrinkage.

Made during installation error

From the point of view of technology the process of installation the front door is not anything complicated, but it should be done carefully, gently and carefully, because it affects the quality and durability of the whole structure. Most often made errors such as:

• Misalignment of the door box. This may result in improper alignment of the structure relative to the horizontal and vertical planes.
• The curvature of the door. Depends on how thoroughly it was cleaned workplace. The most difficult – installation of metal entrance doors with your hands, process photos can clearly show this, in prefabricated houses. The reason is that when drilling holes for anchor bolts concrete reinforcement can take all the fasteners to the side. Metal thrust will help to avoid such mistakes – they shift the point of drilling into the wall or floor.

The Specifics of installing a steel door in a wooden building

Erected a log house over time gives a significant shrinkage. On average, it lasts from six months to five years, and the difference of height may be from 2 to 5 centimeters. For this reason doors in a wooden house are set for individual technologies. It is possible to avoid jamming the door and tilt the block to avoid heat loss in the cold season.

In a wooden house to work with the openings are quite difficult, and it should be done much neater than the usual panel high-rise building. Specialists extremely advise to drive to the bars anchor bolts with a length of 150 mm. the installation of a metal door is carried out not earlier than six months from the date of the erection of the walls of the house and final Assembly of the roof. This time period observed for the shrinkage. For the first year after completion of construction of the building provides maximum shrinkage for all the specifications, however, the final parameters may vary depending on the moisture contents used in the construction of the wood.

With the installation of metal doors with their hands it is advisable to follow some rules:

• In the end wall of the finished opening in the bars are cut vertical grooves into which oakum is driven. In these holes are mounted the bars to slide. The number of grooves may vary depending on the fixing points.
• In a doorway put special obsada that attaches to the bars with screws. On horizontal rails gaps should not exceed 7 cm, stands – 2 cm. this is Done in order to several years later, the shrinkage of the entire wooden frame of the house was not jammed inputthe door.

In order to avoid the effects of shrinkage of the building on the door itself and its subsequent deformation before the actual installation in a wooden house is mounted an additional box, which is called casing box. It is designed for damping oscillations of the walls.

The Door frame in wooden buildings it is advisable to choose more massive than in the panel or brick house. In addition, during the selection take into account the lower strength of wood and redistribute the load on the structure by increasing its points of attachment.