DIY tyre Playground in your own hands

An Important element of landscape design is a Playground. There are plenty of great ideas to build the perfect recreation area for the crumbs. One of them – is to create an amazing Playground from old tires. You need to exert a little imagination and your kid will get a wonderful site for games. Consider what you can make crafts from tires for the Playground. In fairness it should be said that this material allows you to improve any area adjacent to the house territory.

What you should be?

Made from old tires for children's playgrounds can make even a novice master. They do not need a special tool or a high level of professionalism. Simply plug in your imagination. Will greatly help to create and implement crafts from tires for Playground pictures, showing the different variants of the arrangement of the plot.

So, initially you need to stock up on material and to pick up the instrument.

You'll need:

• Old tires;
• Universal glue;
• Sharp knife
• Jig saw, screwdriver;
• Strong scissors
• Mounting parts (screws, bolts);
• Oil paint;
• Paint brushes;
• Supplementary material (plastic, driftwood, plywood).

So much easier to create a DIY wheel tires, listen to the advice of a professional masters:

1. Best of all for the arrangement of playgrounds to the use of imported tires. Domestic tires have thick rubber. Such material is much more difficult to handle. However, this rule does not apply to all crafts. After all, for some models, it is preferable thick rubber.
2. The best option is winter tyres. These tires are much easier to turn.
3. It is Recommended to use enamel paint. They exactly lie on the surface. In addition, are resistant and do not raise compared to other paints, “poisonous” of the smell.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Providing all the highlights, you can go on to create amazing patterns.

How to make funny?

Almost all kids love famous cartoon. So they will love to create these crafts out of the tyres. Smeshariki Playground will be a wonderful decoration of land for recreation.

To Create such heroes is absolutely not difficult. Small difficulties can arise with the painting of the face. But even with this task you can handle, if you care. In addition, you can use a pre made stencil.

Progress:

1. From the plywood to cut out a circle. Its diameter must match the internal size tires.
2. Draw on the plywood face of the character. After drying, insert it into the tire.
3. Cut out lugs. It is better to use a piece of rubber. In this case, they can easily be bend. Fixed lugs with screws.
4. To give support, you need to consider “legs”. This can be bricks, painted in the desired color. A good option would be sticks of wood.

Manufacturing such articles made of tires for children's playgrounds, do not forget that one character is not enough. It is better to make two children. Also, consider interesting decor. For example, one of the characters can be attached with screws a toy guitar.

Fairy tale characters

Having Carefully studied the above-described operation principle, it is possible to make more complex crafts from tires for the Playground. Wolf, hare, bear will be a great decoration area for kids. These characters, as if released from a fairy tale, cause guys a lot of positive emotions.

To Help make such articles made of tires with their hands master class:

1. For the character will need 4 tires. It is desirable that one of the tires was larger than the rest. This is the body of the hero.
2. Two tires should dig into the ground. You can even use the same bus, its pre-cut. It – the future legs of the animal.
3. On them, with the help of screws, attach large tire. From plywood to cut out a circle which will become the midsection of the hero. It is attached to the bus.
4. Top with small screws bolted the tire – the head. You should also cut a circle out of plywood for the face.
5. Hands can be made of rubber. Fix them with screws.
6. Now we need to cut the lugs, depending on the character. For the bears will approach the circles of plywood. For wolf – the two triangles. The Bunny – the more complex the shape of the ears.
7. Now it is time to work. Draw a face, tummy.

Amazing machine

Young motorists will be delighted by this DIY tyre Playground. Machine to make completely not difficult. It to any parent.

Progress:

1. For car will need 4 tires.
2. One of the tire is placed horizontally. Both sides dig in the tires, setting them upright. It is the seat of the future of the motorist and the rear wheels.
3. To provide comfort while sitting on the horizontal tire is better to put a piece of plywood.
4. Front a short distance digged another tire. It will simulate the front wheels.
5. To give morethe plausibility of the car, attach the wheel, old Faro and junk arm.
6. Consider a back seat. This may be an additional tire or a piece of plywood.
7. Don't forget to paint the “auto”.

Allows you to more clearly understand how to make crafts from tires for Playground pictures.

The Original swing

Without them any play area will look unfinished. Therefore, when planning to create beautiful crafts from tires for the Playground, be sure to allow for the construction of swings.

Manufacture them in several ways. If the lid is to attach one rope, you will get a vertical design. Used three ropes tied at the same distance, will produce excellent horizontal seat.

Most Importantly, choose a very strong rope or even the chain. The lid also should be strength.

Great sandbox

This is the easiest DIY tyre Playground. Show imagination, you can original make a sandpit.

Some excellent ideas that will help you to choose the required design:

1. If you plan to take a large plot with a sandbox, you can restrict this area vertically exposed tires. Left them to paint and decorate.
2. To a small sandbox, you can use one large tire. It is placed horizontally. Be sure to paint the bus. You only have to fill up the sand. Installing a high stick and attach a piece of cloth, you can simulate a mast with sails. Besides the decorative function, this design will protect your baby from the sun's rays.

As you can see, to make a variety of crafts out of tires easy. And at the same time incredibly exciting!

Zebra stripes or giraffe?

This is the most common crafts made from tires for the Playground. Besides, they are very easy to make yourself.

To Create an original animal in the following way:

1. Up To half kopite in the ground vertically installed tire. It is the body of the future animal.
2. Next kopite vertical post. You can use log wood. Post height should be 2 times exceed the tire. This is the neck of the animal.
3. On Top of this pillar placed head. It can be made from plywood. But this design, unfortunately, is devoid of volume. A great “head” can be a plastic bottle. In this case, it is easy to cut the lugs.
4. After you install the animal design you should paint. Be sure to connect to the creative process of children. They will surely enjoy to inflict stripes to a Zebra or tiger paint kind.

Slightly modifying “head” and coloring, you can get ostrich or horse.

Manufacturer of rocking chairs

Planning what more can be done DIY wheel tires, don't forget about the play area for baby. The perfect solution is a rocking chair. Would have to exert a bit of effort.

To Make the design possible algorithm:

1. Be durable tyre and a Board seat.
2. Bus cut across into 2 parts.
3. To the Board fasten two pieces of wood to the width that corresponds to the wheel size.
4. Paint the bright colors of the bus and Board.
5. Connect the stub ends of the wheel with a Board.
6. Be Sure to check that the rocking chair had protruding nails and gaps.

Decorations for a plot

However do not forget that you can make a variety of crafts from tires to garden with his own hands.

Very popular:

1. The Flowerbeds of tires. This is a great ornament of the site. Tires are used in almost original form. You only need to decorate a flowerpot. Some owners build them a certain way, creating an astonishing design.
2. Flower garden-fence. Is a more complex version. For it will need two types of tires. Large tires will be flower beds. They are installed horizontally. Smaller tires are “hedge”. They are placed vertically, combining with established ‘flower beds".
3. A Beautiful Swan. a Little bit of effort, you can create amazing crafts from tires to garden with his own hands. Very elegant and generous looks at the plot of Swan. In addition, a perfect masterpiece can be used as a flower garden.

Swan tyre

Wonderful decoration for your artificial pond, which also can be made from tires will become a decorative bird. Beautiful design, from which it is impossible to tear your eyes require a little effort. So, consider how to make such crafts from tires.

The Master class this will help:

1. On the tire label should be applied, which will be the incisions.
2. Using a sharp knife or jigsaw, strictly on the lines to make slits.
3. A Small tip: in the body and the neck of the Swan, cut a small hole. Through them it is necessary to pass a solid wire. It will provide the necessary pose Swan – a frame.
4. Give the bird a desired shape.
5. Now we have to paint the Swan. The most popular color is of course white. However, silver Swan or gilded do not look less than gorgeous. Don't forget about the redbeak.

Conclusion

Now that you know how to make crafts from tires, connect your imagination and start creating. Don't forget that amazing and unique masterpieces can be born from the most ordinary scrap vehicles – from old tires.