The polyphosphate filter: description, characteristics, types and reviews

Tap water in each region has its own stiffness. And the softer the water, the less the scale remains on the heating elements of household appliances such as electric kettle, washing machine, boiler, etc. to reduce the amount of nitrates and extend the life of expensive equipment, it is recommended to use special protective system. Popular fighters against scale formation and other chemical deposits on the important elements and components water heating equipment are polyphosphate filters. According to experts, a technique that is used in conjunction with cleaning devices, needs repair much less frequently than the devices in use which use untreated tap water.

Function and usage

First and foremost it should be noted that the polyphosphate filters are used everywhere and is readily available for purchase. Most importantly, except for periodic replacement of the crystals themselves, additional care device is required. The device reduces the rate of scale formation, thus preventing breakage of component parts and the heating elements, the common reason for faults which is often formed scale.

Polyphosphate filter for boiler, according to user reviews, is the most affordable variant of water purification and extending the service life of the equipment.

What is design

By Itself, the polyphosphate filter has a simple structure:

1. Cap.
2. The Main bulb.
3. Plums.
4. Filler.

The process begins with the flow of water through the cover, and passing through the filter, it goes through the drain and into the water heating technology. Before you purchase the filter, it is important to understand what camera in the future it will be used. Because each device has its own separate modification. Today's models can contain a granular filler, and powder.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Working Principle

Unfortunately, in many regions of our country to drink tap water in its original form is not possible. Often its composition exceeded the content of heavy metals and phosphates. To preserve the health of consumers, water undergoes multi-level cleaning. Speaking about the measure of water hardness, it is worth noting that it does not pose any harm to humans. But for the technical devices, the stiffness of which is inflated, can be a fatal cause of failure.

When water gets into the polyphosphate filter, it passes through the filler-sodium salt. Polyphosphates instantly begin to change each other, enveloping the hard salt, resulting in slowing down the formation of scale.

Types

The Modern market provides consumers with a huge selection of water treatment devices. As the filler can be poured into a separate capsule, through which will pass water, and laid in the very technical device.

According to the construction of cleaning systems are divided into:

• Flow.
• Filters-dispensers.

Installation

Not always in conjunction with a water heating device, the consumer acquires and installs a cleaning system. Often, the water heater, boiler, dishwasher or washing machine is used without additional filtering of the incoming water. Therefore, after the acquisition of the polyphosphate filter and its installation it is necessary to clean from limescale heating elements with special chemical compounds.

As cleaning agents for a water heater or boiler suitable non-abrasive solvents, which are purchased together with the flushing liquid and connected to the heat exchanger. Under high temperatures the reagent begins to act and has a destructive effect on the scale. After the fluid must be drained, the device and the heat exchanger cleaned, and the design to be disconnected from the heater.

After installing the cleaning unit. Method is determined depending on the type of device with which the system is used. For example, the polyphosphate filter for washing machine is fixed in the filling hose. The same system is used for the treatment of water for boilers. Due to its small size and simple device, polyphosphate filters, according to user reviews, installed easily enough. Their service also requires no special knowledge and skills, enough time to change the filler. You can purchase it in specialized stores.

Main advantages

Polyphosphate filter for boiler and washing machine are recognized as the best and cheapest option prevent the formation of scale, thanks to:

1. Simple installation.
2. Small size.
3. Easy maintenance.
4. High-Quality fillings.

Disadvantages

If we talk about the polyphosphates which are used to protect the washing machine, in this case, has its drawbacks. When you choose toocheap models have to pay attention to the water quality and the absorption of large amounts of resources. As a rule, without additional replacement cartridge maximum operating life is approximately six months. The film, which is formed in the process of a chemical reaction that dissolves quickly under the hot water. Accordingly, when selecting a washing mode water heating shall be 55 degrees.

You should Also take in consideration the fact that the active use of the polyphosphate filter on the sides can form deposits of calcium and other salts. Unfortunately, to get rid of them is not so simple. Leave them on the surface of the boiler or washing machine is not recommended, because if the layer becomes too large, it will adversely affect the operation of the device. It is also important to note that the polyphosphate water filters with great storage and salt content in any case can not be used for drinking water or prolonged contact with the skin.

Filter Harmful for health

It is Important to understand that water, which is cleaned with the help of this filter, it becomes technical, and it cannot be used for drinking or cooking.

Speaking about how harmful such a filter for your health, you can say one thing: to make use of its use is undesirable, since it is a chemical reagent, respectively, to drink water from under the filter, just impossible. However, if you put it in her hands when necessary, chemical burns due to low concentration will occur.

To ensure maximum protection of expensive equipment, it is recommended to periodically check the amount of the reagent. If it has less than half, it is best to replace part. Otherwise, the degree of protection begins to weaken.

Turning for advice to the experts, we can say that in order to ensure safe operation it is best to use a powdered reagent. He is actively fighting not only the scaling but corrosion that often affects heating elements. If the area of damage becomes too large, it may lead to complete replacement of heating elements and equipment.

Conclusion

The Polyphosphate filters – this is the best option to protect appliances from limescale. They are affordable and easy to install. Replacement of the filler, as a rule, is carried out not more often than once in six months.