How to choose the cutting machine for metal? Overview of cutting machines for metal

Date:

2018-04-01 10:31:14

Views:

679

Rating:

1Like 0Dislike

Share:

Table of contents:

Cutting machines are made with motors of different power. Directly metal cutting is carried out thanks to a special abrasive circle. Today on the market models statin and table modification.

Depending on the size of the working surface you can use different blanks. As a rule, devices of this type to cope successfully with the pipes of steel and cast iron.

cutting machine for metal MAKITA

How to choose a model?

If you choose the right machine for profiles, you should first give preference to the desktop versions. The motors they are often set to 2.0 kW. All this provides a rather large momentum of the abrasive disk. Yews should choose the rotary type. The size of the working surface depends on the workpiece that will be cut. Supports are often made of movable type.

If you consider a modification for cast-iron pipes, in this situation it is expedient to give preference to models statin. Desktops they are used is quite wide. The motors are most often used by 3.0 kW. The type of tis-model are very different. Tanks for cooling of electric motor is used with the capacity from 0,5 to 3 liters. In this case, a lot depends on the manufacturer. Is an average machine of this type in the area of 45 thousand.

cutting machine metal pendulum

Description of the device FDB Maschinen 275

Presents cutting table machine for metal is often used to work with channels. The motor in this configuration is set at 1.2 kW. Work surface manufacturer provides a small. However, the benefits should include the provision of movable supports. With their help, the workpiece on the table can accommodate quite simple. To buy this cutting machine for metal can for 22 thousand rubles.

Recommended

Staff evaluation: system and methods

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

business activities. its essence and basic functions

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

The modification of "MAKITA-С1230"

Cutting machine for metal "MAKITA-С1230" is often used for working with steel profiles. Cutting part it is applied with a thickness of 3.4 mm. Frame, this model is missing. It is also important to note that the supports are movable type. Thus, cutting of metal can be produced at an angle. The handle for fixing the pendulum in this model available. Directly installed a circle with a diameter of 25 cm Consumes the electric power model about 1.7 kW. The machine today is about 27 thousand rubles.

desktop cutting machine for metal

Description of the device "COM 400"

For channel cutting machine for metal, "COM 400" fits perfectly. First and foremost it should be noted the compactness of the modification. In this reference it can be rotated 45 degrees. The spindle speed is around 2600 rpm. The handle for the pendulum in the design provided. If we talk about machine parameters, it should be noted a high specific power of 3 kW.

The device is powered from the mains with voltage 220 V Dust collector in the standard kits available. Directly gear ratio belt transmission is equal to 0,97. A tank of cooling liquid for the motor is. It is also important to mention the existence of protective casing for the gearbox. Costs in shops the model is not more than 30 thousand rubles.

Setting the machine САО4

Provides abrasive cutting machine for metal can handle pipes with a diameter of 6 cm. control Unit the model standard. Dust collector to the machine is attached. If we talk about the device settings, it is noteworthy the high frequency of turnovers. Consumes the electric power model about 2.3 kW. A tank of cooling liquid is set at 1.2 liters. Yews for fixing pipe includes movable type. To buy this cutting machine for metal, the user can for 21 thousand rubles.

machines Corvette for metal cutting

Characteristics of the model "Corvette-434"

The Machine "Corvette" (cutting the metal) is available with a power level of 2.3 kW. Electricity consumption it is insignificant. It is also important to note that machines equipped with a reliable security system. With metal profiles, they cope pretty quickly. This model is also able to work with channels. The handle fixing supports this model provided.

Directly abrasive wheel installed with a thickness of 3.2 mm. Tisza, this machine uses a standard rotary type. Dust bag included in the kit. The spindle Assembly of the machine is located above the motor. The handle for the pendulum in the design provided. Buy this model today it is possible for 30 thousand rubles.

Description of the device, "jet-315"

The Specified cutting machine for metal among other models of its compact work area. For small metal pieces it fits perfectly. Yews of the model are rotatably mounted, and they are made of steel. The counterweight in this case, with handle.

Thickness of the abrasive wheel is equal to 3.6 mm. For profiles specified model is not suitable. It also is uncomfortable to work with cast iron pipes. The transmission unit in this device is belt type. The mechanism for clamping the rotary type is used. Buying this machine is in the shop for 18 thousand.

abrasivecutting machine for metal

The parameters of the model "jet 400"

The Specified cutting machine for metal can boast high-quality abrasive disk. Its thickness is 4 mm. In this case the pendulum has a counterweight with the handle. The work surface is quite large, and blanks you can use different sizes. To rotate the Tisza there is a special scale. Support for this model has a fixed type. Over the reducer protective casing is installed.

Spindle unit in the presented configuration is located in the upper part of the structure. Limit frequency of rotation of the disk is 2800 rpm. Electricity this machine consumes in the area of 2.6 kW. You can buy it at a price of 22 thousand rubles.

Modification of Optimum Maschinen 275

These machines are available with fixed supports. In this case, the position of the pendulum, the user is able to adjust. Tisza directly set the model turning. The working platform provides a large and workpiece is able to cut different diameters. For cutting steel pipe the model fits well. Also it is used to work with channels. The scale of the angle of rotation of the Tisza, the model is available. Dust collector in this case, the manufacturer is not provided.

Transmission uses a belt type, and the protective cover it has. Directly frame the device is missing, but the frame is strong. The maximum spindle speed is equal to 3400 rpm. It is also important to note that the abrasive disc is mounted with a thickness of 2.5 mm. the mechanism of the clamping jaws of the ordinary. To purchase this cutting machine for metal (pendulum) is 33 thousand rubles.

cutting metal

Features of the machine Optimum Maschinen 310

The Power of the specified machine is located at the level of 2.2 kW. In this case, the counterweight has a pen, and it can be controlled. Yews are used fixed, however the supports for fixing the workpiece can be moved. Directly spindle unit is located in the lower part of the structure.

Protective cover for block transmission are provided. It is also important to note that the machine is equipped with a dust collector. To adjust the position of the spindle with the lever. Gear ratio belt transmission is equal to 0.95. The cost of this model is around 19 thousand.


Article in other languages:

AR: https://tostpost.com/ar/business/13391-how-to-choose-the-cutting-machine-for-metal-overview-of-cutting-machin.html

BE: https://tostpost.com/be/b-znes/23954-yak-vybrac-otreznoy-stanok-pa-metale-aglyad-adraznyh-stanko-pa-metale.html

DE: https://tostpost.com/de/business/23977-wie-w-hlen-sie-die-trennscheibe-maschine-blades-bersicht-trennscheiben.html

ES: https://tostpost.com/es/negocio/24006-c-mo-elegir-tronzadora-de-metal-revisi-n-de-m-quinas-cortadoras-de-met.html

HI: https://tostpost.com/hi/business/13418-how-to-choose-the-cutting-machine-for-metal-overview-of-cutting-machin.html

JA: https://tostpost.com/ja/business/13420-how-to-choose-the-cutting-machine-for-metal-overview-of-cutting-machin.html

KK: https://tostpost.com/kk/biznes/23948-ta-dau-otreznoy-stanok-metall-keset-n-sholu-kesu-stanoktary-metall-boy.html

PL: https://tostpost.com/pl/biznes/23897-jak-wybra-tarcza-obrabiarka-do-metalu-przegl-d-odcinaj-cych-obrabiarek.html

PT: https://tostpost.com/pt/neg-cios/23901-como-escolher-o-corte-de-m-quina-em-metal-vis-o-geral-otreznyh-m-quina.html

TR: https://tostpost.com/tr/business/23955-nas-l-se-mek-kesim-makinesi-metal-mi-genel-bak-kesme-tak-m-tezgahlar-m.html

UK: https://tostpost.com/uk/b-znes/23927-yak-vibrati-v-dr-zniy-verstat-po-metalu-oglyad-v-dr-znih-verstat-v-po-.html

ZH: https://tostpost.com/zh/business/14116-how-to-choose-the-cutting-machine-for-metal-overview-of-cutting-machin.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

The analysis of the production costs

The analysis of the production costs

the Cost can be defined as the costs of the enterprise for the production of a product. The technological process of production of even the simplest of products, usually requires the various expenses. In addition to the raw materi...

What is a service? Public services. Legal services

What is a service? Public services. Legal services

so, let's talk about what is service? This term refers to the action of any organization or institution, and brings some benefit.VarietiesServices are different: utilities, information, shopping, security, household, etc. for Exam...

Faience - what is it? What distinguishes porcelain from earthenware?

Faience - what is it? What distinguishes porcelain from earthenware?

Humanity since ancient times used for the manufacture of faience plates and cups. And in the modern world ceramic ware is considered to be almost indispensable. Although the style of products, technology of their production are co...

A self-employed citizen: activities, patent

A self-employed citizen: activities, patent

a self-employed citizen - a concept that began to interest many people in Russia. A term generally used to refer to individual entrepreneurs who have no employees and carry out other private activity. In fact, it is those who work...

Copper plate, foil, ribbon: production, characteristics, application

Copper plate, foil, ribbon: production, characteristics, application

Working with metal is people have very long time. Mankind uses a variety of types of metals for the production of functional and decorative objects, creating various alloys having other than the original material characteristics.I...

The garden galvanized with polymeric coating: photos, reviews

The garden galvanized with polymeric coating: photos, reviews

in the cultivation of vegetables, root crops and greens is important, including and properly plan the site, making a neat patch. Options breakdown the past there are many. Most often, gardeners make them just from the land or usin...