Endoscope technical: specification of device

Date:

2020-04-26 19:00:16

Views:

617

Rating:

1Like 0Dislike

Share:

Table of contents:

An Endoscope is a device for inspection of hard to reach places. Technical modifications are widely used in industry. At the metallurgical enterprises of a device of this type is used to inspect furnaces. Endoscopes also provide an opportunity to look inside the various tanks.

The main device parameters include resolution, focal length, radius and tilt angle inspection. To understand the question, it is necessary to consider the device in the normal model.

flexible endoscope technical

What is endoscope

An Endoscope (technical) includes a pipe, tube, and train. Lens models use different diameter. Locks, usually installed with the adapter.

Most of the device is done with a connector that is the source of light. The valve devices are designed for a certain pressure. Adjustment of the endoscope is carried out by the lever.

Device Types

By design, distinguish flexible and rigid device. Depending on the type of action, there are optical, lenses, and gradient modifications. The device can be equipped with relay or without it.

endoscope technical

Description flexible models

A technical Endoscope (flexible, digital) is actively used to survey the condition of the pipes. The valve models are installed with the heads. The critical angle of inclination at the described devices is not less than 40 degrees. To control the end uses leverage.

The lens of the endoscope technical (flexible) set of directional type. Most modifications are going flap air supply. It should also be noted that there are models with a train. As a rule, they used the long tube. There are versions with lighting without it.

Recommended

Staff evaluation: system and methods

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

business activities. its essence and basic functions

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

Features rigid devices

Rigid technical endoscope is made with steel tubes. The diameter of the lens models is equal to not less than 1.3 cm Also worth noting that exhaust valves can withstand a lot of pressure. The limit angle equals 10 degrees. The levers are used by the device with the connector. In the tube is the operating channel. Pressure limit of modifications is equal to not less than 4 PA. Plumes of different diameter are used.

The average tube length is 8 cm Locks are used with levers and without them. In many endoscope biopsy valves are available. Models of this type can be used for examination of not only pipes, but also complex mechanisms. The maximum permissible temperature of endoscopes of this type is equal to 40 degrees.

Optical modifications

Optical models are high resolution. There are many compact devices. In order to supply air to the tube used the adapter. Valves typically used in operating type.

Pressure Limit of the device is 4 PA. The focal length of at least 2.5 cm Tubes of modifications apply to small size. Some devices are well suited for examination of the devices. The valves of air supply used with overlays. It should also be noted that the devices differ in viewing angle. The ends are usually made of plastic. Switches are used with clips and without them.

Lens endoscopes

To work in a wet environment suitable lens endoscope (technical). Feature of this device depends on the manufacturer. Tube models used the small diameter and the ends are set in different forms. The majority of endoscopes are made with one head. The levers in this case are set on the remote. The valve is designed for low pressure. The locks are used with filters and without them.

Some endoscopes can boast of compact dimensions. Controllers are installed behind the tubes. The angle of the device reaches a maximum of 45 degrees. Operating the valves meet with linings and without them. Switches use a different type. Managed tubes are applied with a diameter of 1.3 cm

Some devices are made with movable heads. It should also be noted that the maximum allowable temperature for use of endoscopes of this type is equal to 30 degrees.

borescope endoscope technical

The gradient devices

Gradient borescope endoscope (technical) is manufactured to survey large drive units. These models allow us to inspect tanks of different sizes. Some devices are made with channel tubes.

Most of the endoscopes capable of withstanding pressures over 4 PA. The device with the suction valves are distinguished by compactness. Lenses they have used small diameter, and the critical angle of the equipment is approximately 40 degrees.

Minimum focusing distance reaches 1.5 cm Levers are used with connectors. Quite often, the endoscopes are mounted movable tube. Loops are used with a length of 7 cm Valves are used at 3 and 5 PA. The connectors used with connector and without it. It should also be noted that the tubes are used with controllers. Some versions are made with two connectors.

rigid technical endoscope

Description models with repeaters

The Device with the repeaterproduced an overview of 40 degrees. Tube diameter they have is equal to not more than 1 cm supply Valves, usually calculated at 4 PA. Locks are only used with overlays.

Endoscope technical multihop great for plumbers. Many modifications have short tubes. Heads are tipped with and without them. If we consider the model with operational amplifiers, the lenses they use small diameter. Leverage models made with a channel adapter. Universal cables are different lengths.

testing price

An device

An modification widely used in large metallurgical enterprises. Most devices are made with connectors of the contact type. Some of them produced with one lock. The viewing angle is on average equal to 30 degrees. Minimum focusing distance is not more than 1.8 mm and If to consider the device idle, they are made with linear adapters. Most devices are made with long tubes.

It should Also be noted that these modifications differ in size. If we consider the model with the controlled tubes, they have a high resolution. Controllers are used with pads. Head for devices fit different shapes. The maximum permissible temperature for the use of such endoscopes is equal to 45 degrees.

Model jProbe ST

Devices of this brand are distinguished by high resolution. Modern models are made with movable tubes. It should also be noted that there are devices with contactors. Some of them work with controlled head.

Controllers are applied to the small size. The locks on endoscope (technical), typically with filters. The average tube diameter is 1.4 cm supply Valves of modifications designed for 3 PA. Cables are used with connectors and without them.

Some models are made with connectors. As a rule, they are used for examination of vessels. It is also important to note that the system of protection of the endoscopes of the brand applied series R30.

If we consider the device operating valves, they operate at high pressure. The angle of inclination is not more than 4 degrees. The optimal focal length is 5 cm Repair of endoscopes is performed only in specialized service centers.

technical endoscope flexible digital

Endoscopes Olympus

Models of this brand stand out mobile handsets. Head to the endoscope (technical) are of small diameter. The pads used are made from polyurethane. Most of the devices is done by adapters. Lenses are installed with linings and without them. Suction valves models with a pressure of 4 PA. The system of protection applied in series P30 and P40. The supply valves are used with connectors.

Some modification work from managed tubes. If we consider the device to biopsy valves, they are made with short tubes. The angle at the most equal to 30 degrees.

On testing the market price reaches 35 thousand. the Optimum focal length for the survey is 4 cm Locks modifications are only installed for the adapter. The maximum permissible temperature of use of the endoscopes specified manufacturer is equal to 40 degrees. Among the shortcomings can be noted the high cost of goods.

endoscope technical characteristics

Model Testo

The Endoscopes of this company can be used to inspect furnaces. Minimum focusing distance is 0.5 cm Tube is used with a diameter of 1.4 cm, Levers, usually installed on the heaters. The majority of these devices are manufactured with switches. Cables they are used with flexible racks. Some endoscopes capable of operating at high humidity. It should also be noted that there are modifications with the operational flaps. The ultimate pressure in them is equal to not less than 2 PA.

The system of protection applied in a series P33. The ends in this case are controlled by levers. Controllers are used with connectors and without them. The connectors are only installed with the overlays. The maximum allowable temperature of use of the endoscopes specified manufacturer is approximately 45 degrees.


Article in other languages:

HI: https://tostpost.com/hi/business/24146-endoscope-technical-specification-of-device.html

PL: https://tostpost.com/pl/biznes/41700-endoskop-techniczny-opis-charakterystyka-urz-dzenie.html

PT: https://tostpost.com/pt/neg-cios/41342-o-escopo-t-cnico-descri-o-caracter-sticas-dispositivo-de.html

ZH: https://tostpost.com/zh/business/48834-endoscope-technical-specification-of-device.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Articulated and scissor lifts: design features

Articulated and scissor lifts: design features

the Lifts used to deliver heavy cargo to any height. This equipment facilitates the human work and to share the types of na:kolenchaty;roznichny;telescopically;machtovyy.let's Talk more about the first two species, because neither...

Supermarket

Supermarket "Silpo": feedback from employees and customers

In Ukraine, one of the leaders in the market of retail trade of food is a supermarket chain, “building”. Reviews about it are often found on the Internet. Let's see what impression of the famous shops consists of the v...

Meat farm: description, production, types

Meat farm: description, production, types

With the introduction of the EU sanctions low-quality imported meat products in the Russian market was much smaller. However, it is too harmful counterfeit products on store shelves meet quite often. After raising came to a comple...

Based on whether the remuneration of foster parents?

Based on whether the remuneration of foster parents?

based on whether the remuneration of foster parents? This question is of interest to many potential adopters. It is not always easy to decide on raising someone else's kid. He, like children, need to feed, water, clothe. For all t...

Meters of concrete strength. Methods of testing concrete

Meters of concrete strength. Methods of testing concrete

Testing of concrete for strength is carried out using special instruments. As a rule, they consist of a sensor and conductor. The modules for the devices are chosen with adapters. The models differ in the accuracy of the measureme...

Payroll number - what's that? The headcount of employees of the enterprise. The calculation of the payroll

Payroll number - what's that? The headcount of employees of the enterprise. The calculation of the payroll

Calculate the payroll of employees is one of the important reports served in state bodies. This compilation of statistics, accounting and similar are often not very understandable to the common man. In any case, to meet the requir...