Fill pattern of the duration of working time. Observation sheet timing

Date:

2020-05-18 01:20:20

Views:

478

Rating:

1Like 0Dislike

Share:

Table of contents:

To Properly track and account for working time helps the duration of working time. An example of using these records can be found in almost every plant or facility, where it is necessary to normalize the working day. Time measurements with the help of timekeeping – the way research is time-consuming to commit any action. The measurements imply the description of technological process, working conditions, and production methods.

sample fill duration of working time

The Measurements will help to record working time

The Duration as a way of study time depends on the conditions of the meeting and the purposes with which it is made. For example, the requirements for timing, which will calculate salaries and cost of services differ from those that must be followed in the preparation of the timing to determine the level of loading of personnel.

A Correct measurement of time spent on the execution of the work helps to make a proper schedule of working time, as well as to bring to a full load of Unallocated capacity, manpower and equipment used.

Who should be responsible for normalization and measurement?

This is Usually done by a professional quantity surveyor, who are trained in enterprises. Well-trained and experienced quantity surveyor is a valuable employee, which helps management to monitor staff time, as well as properly distribute the load.

Where to begin?

First, identify the purpose of timekeeping. For example, you need to make a schedule work time of any employee's remuneration which is not dependent, and is simply clock rate.

Recommended

Staff evaluation: system and methods

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

business activities. its essence and basic functions

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

the duration of working time example

Remember that such staff is not interested to work faster. There is no incentive to work more efficiently, as it is not directly dependent on the level of wages. Therefore, the quality of timing will depend on the performance of such employees.

If we talk about large enterprises, they staff made outfit-tasks, which specifies the list of works to be performed by the employee. Examine it carefully, look at the types of work that will be undertaken. If you do not understand about any type of work, you need to find the routing of this workflow. Basically, every enterprise has either the technical management or production Department who does this. You can contact them with a request for the preparation of technological cards, and consult on work to be performed.

After decided on the list of works and order of their execution, it is necessary to give a description of the workflow that will be measured. Make the criteria that need to be guided during the measurement: determine the starting point of the process and the point at which the process finishes, the use of working time, cyclic operation, and other details.

After gathering all the necessary theoretical information to commence measurements. You will need pre-prepared forms of timing or take notes in the draft (as is more convenient to make comments).

Watch needs selection Commission

You Need not one person to record working hours – examples of such documentation will not be fully objective, since the employee, being without additional monitoring, it can tighten your workflow. It is recommended to measure the time with the participation of representatives of the technical Department (production Department). They will monitor the consistency and accuracy of performance. And it is also recommended to invite representatives of the management of service employee which measure the use of time. Believe me, when he sees such a Commission, will work much more productive, and there will be less temptation to try to outsmart you.

schedule time tracking

The measurements you need to be careful. There is work being carried out on cycle. And there are those that occur only once. In the works made for the cycle (for example, the cutting of the pipes), not all works can be considered on each cycle. Preparation of work area, setting machine and other equipment, cutters – all these works will need after measuring evenly divided by every detail that was produced.

The Cycles workflow

Then you need to correctly fill out a form with measurements. In order to do this, you can use the following sample fill duration of working time. To make it easy, if you understand the basic principles of measurements. The process should be divided into periods of working time: the operational maintenance of the production process, the preparatory-final stage, and should take into account the time for rest and personal needs.

Operational working time – the period of time that it took workers to perform tasks. In this paragraph take into account the amount of time that it would take for the worker, if he had not left the workplace, not distracted, andall equipment would be in one place and already in operation.

The service production process consists of the time spent on ancillary work that is necessary to the production process never stopped. For example, to replace equipment that is worn out, swap out damaged drill bit, replace the engine oil and the like.

The Preparatory-final stage includes the preparatory operation, the setting of instruments and other work for the preparation of the workplace. Properly record all values you will help given below is a sample fill duration of working time.

After a detailed analysis of your measurements, you will find work that is not included in a routing workflow. Also, they cannot be attributed to the listed cost.

time

That refers to the process of execution of works, should be excluded. Basically it is moments like: talking on a cell phone, the implementation of related work, the implementation of urgent orders, guidance and other actions not connected with the execution of the measured operation.

How to fill out a form?

To gramatno to display the measurements, make the duration of working Time. The form and the example of filling below.

Operation CodeName of the workflowThe Name and serial number of the timingSecondary znaczenie
12.01.1513.01.1513.01.1513.01.1514.01.15
12345
Duration, with
1Get a job from the master401515153824,6
2To Bring from a warehouse pipe612424245537,6
3To Prepare the workplace652121217440,4
4To Establish the performance of the machine411717176030,4
5To Prepare a machine for cutting209992514,4
6

Cut the pipe

251517211719,0
7Put blanks in place101210111211,0
8Clear the machine and remove the job351010102718,4
9Pass the work of the master401717173024,2
SegoSecond337,0140,0140,0145,0338,0220,0

As shown by the fill pattern of the duration of working time was measured the type of work cutting pipes. Three measurements were made in one day. Since they were made in a row, then the worker is not spent on every detail is the time to receive tasks from the master, hike the pipe, the preparation of the workplace, etc. So the time spent on the first part in such kinds of works, is divided into two other measurements.

You Should output the average value man-hours

Once measurements are made, displays the average value. According to the data, which shows the fill pattern of the timing of work time, average duration for such work equal to 220 seconds. If we convert to hours, you get people 0,061/hour.

When scheduling the working day you can use the data. For example, if you want 100% load employee with this work, it is possible to calculate how much he need to cut the pipes. Considering that the working day consists of eight hours, then:

8 : 0,061 = 131,15 PCs.

It Turns out that the employee is about 131 times to produce the cutting of the pipes.

Note all factors in the performance of work

So presents a straightforward calculation and the approach to the measurement of working time. But, planning the work schedule for the employee, you need to consider other factors. People just physically can't, like a robot, stand behind the machine 8 hours a day. He will leave for personal needs, rest, which may distort the timing of working time. Example: in complex works for the machine must be at least 5 minutes of rest after each hour of work.

the duration of working time form

Also plays a significant role and skill of a staff member. It is necessary to make measurements at several working to bring the real average value. You can not focus on the results of one “experimental”. If we talk about the fitters, the turners, the repairmen, it is often observed the following pattern: the higher his rank, the faster they performed the work. Plays an important role and experience of the employee.

Other temporary losses

There Are different loss of working time. For example, the locksmith can chop plate, and it will come from another service and ask for some tools or help to do some urgent work that can not be postponed.

periods of time

Typically, such losses are hard to describe. The best way to loss factor and multiply it by the standard time, thereby giving the staff an opportunity to take a breath during the operation.

For example, businesses that produce items in the shops, the quantity surveyor allow for 8-10% of lost time and in the normalization of the working day and consider them in the chart.

downtime

Also, before completing the final timing, it is recommended to read all the footnotes in an already approved model rules time – usually there are some nuances that must be considered, and painted features of the valuation of a particular job.


Article in other languages:

AR: https://tostpost.com/ar/business/22338-fill-pattern-of-the-duration-of-working-time-observation-sheet-timing.html

BE: https://tostpost.com/be/b-znes/39809-uzor-zapa-nennya-hronametrazhu-praco-naga-chasu-naz-ral-ny-l-st-hronam.html

DE: https://tostpost.com/de/business/39318-f-llmuster-zeitmessung-arbeitszeit-aufsichtsrat-blatt-zeitmessung.html

ES: https://tostpost.com/es/centro-de/39100-modelo-de-formulario-de-cronometraje-del-tiempo-de-trabajo-el-observat.html

HI: https://tostpost.com/hi/business/23960-fill-pattern-of-the-duration-of-working-time-observation-sheet-timing.html

JA: https://tostpost.com/ja/business/21910-fill-pattern-of-the-duration-of-working-time-observation-sheet-timing.html

KK: https://tostpost.com/kk/biznes/40219-toltyru-lg-s-hronometrazh-zh-mys-ua-yty-ba-ylau-para-y-hronometrazh.html

PL: https://tostpost.com/pl/biznes/42012-wz-r-wype-nienia-pomiar-czasu-pracy-rada-nadzorcza-arkusz-pomiaru-czas.html

PT: https://tostpost.com/pt/neg-cios/41650-padr-o-de-preenchimento-de-cronometragem-do-tempo-de-trabalho-supervis.html

TR: https://tostpost.com/tr/business/36742-rnek-doldurma-i-leyi-inde-bir-al-ma-s-resi-nceleme-sayfas-zaman-tutma.html

UK: https://tostpost.com/uk/b-znes/40658-zrazok-zapovnennya-hronometrazhu-robochogo-chasu-sposterezhniy-list-hr.html

ZH: https://tostpost.com/zh/business/35529-fill-pattern-of-the-duration-of-working-time-observation-sheet-timing.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Moscow,

Moscow, "Gardener" (the market): customer reviews

In Moscow, there are many shopping centers and markets that offer a large assortment of haberdashery, products, shoes and clothing. Popular "green thumb" (market). Customer reviews show that there is almost all can be pu...

Greenhouse glass on the dacha

Greenhouse glass on the dacha

every second of the cottager always arises the idea of building the greenhouse with his own hands. It is, of course, on the one hand very simple, but if you look on the other, it raises many questions. Especially when the work has...

Binary options with minimum Deposit in rubles: reviews

Binary options with minimum Deposit in rubles: reviews

Many Internet users trying to use the network as a source of income. This is understandable: people believe that in this way can achieve some financial independence; to reach a new level of their material development. And the Inte...

The structure of a vessel. General structure of vessels and their basic elements

The structure of a vessel. General structure of vessels and their basic elements

the structure of a vessel – this is an important task facing the workers of the Navy. They should fully provide cargo and passenger flows. All tasks can be effectively solved only with the help of qualitative improvement of ...

Why use an individual approach to each client?

Why use an individual approach to each client?

long gone are the times when the Soviet Union was a shortage of goods and services, there were large queues in shops and offices. Today on shelves all shelves adorn a variety of products in large quantities. Different organization...

"Cayman" (the tillers): manual, reviews. Attachments for walking tractor "Cayman"

Cultivating equipment in the home for Amateur gardeners and avid gardeners enhances the effectiveness and productivity of their work. One of the leading positions in the ranking of the most popular manufacturers of walking tractor...