What kind of ground clearance is "Ford Fusion" and how to increase it?

Date:

2018-03-29 00:33:08

Views:

1437

Rating:

1Like 0Dislike

Share:

Table of contents:

Of Course, the main obstacle or challenge for imported cars in Russia is their operation in deep pits, potholes and potholes. Not every crossover will withstand such tests, not to mention passenger cars. However, there are in the world, this “car”, which firmly takes any Russian pit - "Ford Fusion" of American manufacturing. In fact, it is the “high” car in its class. Depending on the modification "Ford Fusion" of clearance of this car is 160 (1.4-litre) or 180 (1.6 litre version) millimeters. However, sometimes even such suspension for Russian roads is not enough. So today we will look at ways that you can increase ground clearance.

clearance Ford fusion"Ford Fusion" however, like all other imported vehicles, mostly equipped with a special polyurethane or rubber inserts that allow you to raise the car at least 5-10 inches. All this stuff with springs “homemade” and extension of the shock absorbers will not give you a normal result, since in any case the car will lose control and will not shake worse than horse carriages. Think – no wonder that the manufacturer has made this size of springs and struts. That's why to change the technical values suspension is highly undesirable. And spacers that are installed between the body and the supporting stand of the car, have absolutely no effect on the car in the technical parts and not shift the center of gravity. However, with the last statement is debatable. If you incorrectly install the rubber spacers, the car will ride with a displaced center of gravity.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How to install data spacers on the front suspension?

The Process of installation is not very difficult and time won't take more than 20-30 minutes. The very sequence of stages is as follows:

  1. Removing the front struts shock absorbers.
  2. Relief of the Central nuts of the uprights.
  3. The Contraction of the spring by means of ties.
  4. The dismantling of the upper Cup and disassembly of the rack.
  5. Removal of 3 short bolts (full-time).
  6. Installation kit reducers and Assembly of all parts in reverse order.Ford fusion clearance

If you have any difficulty...

Sometimes it happens that the arrangements do not fall exactly (usually this happens with the details of domestic production). In this case, to increase clearance ("Ford Fusion"), you need to handle inserts with a file until then, until they fall into place. In this case, the increase of clearance may take up to several hours.

Clearance "Ford Fusion": install reducers on the rear part of the suspension is

increase clearance of Ford fusionHere, too, everything happens in stages, only the other way:

  • Removed the rear seat backrest.
  • Weakened the Central nut of the strut.
  • Understands strut, tightened both springs.
  • On Top of the spring spacer is installed.
  • Mounted back to front, stretched the Central nut and going back seat.

During the installation of this device is also recommended to make the diagnosis buffer of the rebound, the strut and the rubber boot.

At this stage, the answer to the question, how to increase ground clearance "Ford Fusion" can be considered to be received.


Article in other languages:

AR: https://tostpost.com/ar/cars/2939-what-kind-of-ground-clearance-is-ford-fusion-and-how-to-increase-it.html

BE: https://tostpost.com/be/a-tamab-l/5204-yak-mae-kl-rens-ford-f-yuzhen-yak-yago-pavyal-chyc.html

DE: https://tostpost.com/de/autos/5203-welche-bodenfreiheit-hat-ford-fusion-und-wie-es-zu-erh-hen.html

ES: https://tostpost.com/es/coches/5209-qu-tiene-una-altura-de-ford-f-yuzhen-y-c-mo-mejorar.html

HI: https://tostpost.com/hi/cars/2940-what-kind-of-ground-clearance-is-ford-fusion-and-how-to-increase-it.html

JA: https://tostpost.com/ja/cars/2938-.html

KK: https://tostpost.com/kk/avtomobil-der/5207-anday-bar-klirens-ford-f-yuzhen-zh-ne-ony-alay-l-aytu-a-bolady.html

PL: https://tostpost.com/pl/samochody/5209-jaki-ma-prze-wit-ford-f-yuzhen-i-jak-go-zwi-kszy.html

PT: https://tostpost.com/pt/carros/5205-qual-tem-folga-ford-f-yuzhen-e-como-aument--lo.html

TR: https://tostpost.com/tr/arabalar/5211-ne-var-klirens-ford-f-yuzhen-ve-nas-l-art-rabilir.html

UK: https://tostpost.com/uk/avtomob-l/5209-yakoyu-ma-kl-rens-ford-f-yuzhen-yak-yogo-zb-l-shiti.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Traffic rules: traffic rules

Traffic rules: traffic rules

Rules of the traffic controller – this is perhaps one of the most difficult and obscure of topics related to the SDA. But they need to know, anyway. Why every driving school to study such topics as the rules of the regulator...

The engine cooling system of the car: device and principle of work

The engine cooling system of the car: device and principle of work

the engine cooling System in the car is designed to protect the working unit from overheating and thereby controls the operation of the whole motor block. Cooling is a critical function in the operation of the internal combustion ...

Ford Probe: technical specifications, pictures and reviews

Ford Probe: technical specifications, pictures and reviews

Ford Probe – a car, a joint development concerns "Mazda" and "Ford" which is the identical model under the name Mazda MX-6. They have a really similar design (because the basis of the "Ford" was based on the Mazda 626 platfo...

Ferrari Enzo: photo, characteristics

Ferrari Enzo: photo, characteristics

Sixteen years ago in France, on the motor show was presented sports car Ferrari Enzo. This model is also referred to as F60 Enzo, but before the sixtieth anniversary of the firm had a lot of time, so the name was dedicated to the ...

Totachi (oil): responses of motorists

Totachi (oil): responses of motorists

on August 29, 2012 in Moscow automotive exhibition for all drivers of the country presented a new market for our brand – Totachi. Motor oil is made in Japan. This product is very interested motorists. Let's get acquainted wi...

Diagnosis of your car's suspension

Diagnosis of your car's suspension

To check the vehicle for damage there are many types of diagnostic procedures, among which there are also diagnostics of the suspension. Regular inspection will make the operation of your car the most secure and will protect again...