Gas equipment on the car (5th generation): a device principle of operation, installation, prices

Currently very popular to install LPG in the car. It is connected first of all with financial savings on the purchase of fuel for transport. This equipment is a device that gives the ability to store and supply gas to the motor, which directly moves a car.

Now for transport widely used such types of fuel, such as methane, butane and propane. Depending on this, selected special gas equipment on the car (5 generation – the most advanced system). For example, diesel engines operate simultaneously on two types, single-fuel – respectively, for single and dual fuel is equipped with an independent supply. Each of these systems has its own individual characteristics, but common qualities are also present.

Gas equipment

The Increase in gasoline prices has led to the fact that the owners of the vehicles began to look for alternative solutions. The use of gas gave the opportunity to save approximately 40% fuel. But such savings can only be in the case if you install a gas equipment on the car (the 5th generation, it should be noted, is exactly what you need in this situation). Well-known manufacturers whose products have proved only the good side, every year trying to improve their products. High quality LPG are sold as a complete system or as separate parts, each of which is Packed in special packages. For details and must be accompanied by the appropriate documentation. Definitely in the process of purchasing equipment must check the certificate and carefully to examine it.

Recommended

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Emergence LPG 5th generation

Appeared, gas equipment generation 5 (reviews at that time were different) made a splash. The owners could not then imagine what the previous “miracle system" will be improved. HBO 4 generation almost everything perfectly, it worked flawlessly. However, with the new equipment, the owners of vehicles changed.

Basically the impetus for the production of LPG 5th generation has been the rapid development of the automotive industry. Increasingly began to produce machines, which are equipped with the latest powertrains and engines. It is worth noting that this technique is ideal equipment 5 gas generation. Installation cost depends on the type of engine. For example:

• On four – from 80 thousand rubles;
• Six-cylinder & ndash; from 90 thousand rubles;
• The eight – from 110 thousand rubles.

Setting the filter on the gas tank in General rates is not included installation available for an additional cost of about 4 thousand rubles.

The Advantage of LPG fifth generation

Gas equipment on the car (5th generation) has a lot of advantages in comparison with their predecessors. Let's consider the main of them are:

• Gas nozzle is opened for 2 MS;
• Fuel delivery takes place fully automatically;
• Seamless communication petrol and gas block;
• A reducer is made on the basis of the membraneless technology;
• Combining the settings of the gas and petrol injectors;
• Compared with the fourth generation of the life of the equipment doubled;
• Harmful substances in the exhaust gases is much less than its predecessors.

Disadvantages of gas equipment

• The Main disadvantage that has gas equipment to the vehicle (5th generation) – it's the fuel pump. Unfortunately, he quickly fails, but not because this item is made of poor quality. The main reason lies in the impurities contained in the gas.
• Pricing of this equipment fully conforms to the latest standards, it is worth noting that the cost of the system 5 generation far exceeds the price of the previous models.
• To install, you may need the help of qualified professionals.
• Gas equipment of the fifth generation is incompatible with methane.

Important points

If, nevertheless, the decision was made to install LPG on your car, then you should consider when choosing the following details:

• The reducer should match the settings of engine power;
• A choice of Reiki is influenced by the number of cylinders in the engine, and also its configuration;
• All controllers should occur simultaneously with diagnostic system from this it follows that if the vehicle is a new model, and the controller must fully meet him;
• Cylinders are classified according to the type of gas type carried out installation as well as their volume.

Installation of gas equipment 5 generation

Gas equipment is divided into five generations, you should consider setting the very last.

Of Course, the best optionthe vehicle was purchased with pre-installed factory equipment. On this basis, we can safely say that this device came from the factory complete with machine that is able to significantly reduce the financial costs of registration. It also increases the degree of quality assurance.

But in that case, if you decide to perform the installation yourself, you can use the following rules:

1. First, you should open the hood and find the place that is intended for reducer. In the selection process, remember that the device must be carried out exclusively on the main frame of the vehicle. The hoses fit very carefully, avoiding the bends. After the gear is already attached, you can start a connection hose antifreeze. This should be done through a special tee that will be parallel to the system.
2. Next you can begin installing the gas cylinder. The Assembly is made so that the tube is used for filling and gas supply, has acquired the correct location. After that you can safely supply gas to the manifold to make the necessary tie-ins, and install injectors.
3. In conclusion, you should connect all the electrical parts. It is possible to check the operation of the installed system and start the engine.