What happens if you pour oil into the engine? And what to do if that happened? To answer these questions will those who have already faced this problem. Absolutely wrong who think that a lot of oil — this is not enough, and worse this will be. Will! And the consequences will not keep itself waiting long. What to do if you poured the oil in the engine and where it may lead if nothing is done, the next article.
Let right: it is better for such situations to avoid. Experienced auto mechanics can popular to tell the truth about what happens if you pour oil into the engine. And if this happens, then their recommendations will help to cope with the incident.
The Effects of too large amount of oil will spread on several fronts.
Liquids tend to expand when it is heated. Because of this, in a confined space increases the pressure, seals, various gaskets and seals made of rubber, it squeezes with its provisions. This leads to deformation and even the rupture of these elements. Therefore, if you poured the oil in the engine, the consequences are sad: relevant connections razgermetizatsija up from oil leaks. The pressure drops. The engine loses stability, and powertrain in the end wears out faster.
When the pressure reaches its critical level, occur pulse emissions. The candles are poured, the launch is complicated, the engine loses power characteristics, the consumption of fuel increases.
Recommended
How does the rear bushing front arm and how many it serves?
The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...
Oil consumption in the engine. Six reasons
It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...
The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...
Also because of too much oil, the crankshaft actually immersed in it. In contrast, the oil foams. Reducing the homogeneity of the liquid helps to fill with air lifters, which in turn becomes a cause of instability in their work. Because of this rising of the load on the other nodes timing, and they quickly come into disrepair. So, if you poured the oil level in dvigatelei, when folding the node replacement becomes the only way out of the situation. But this procedure will cost is not cheap.
Excessive amount of impact on the system the oil. The oil filter is polluted very quickly that, in principle, is not a big problem, as it is always changing when changing the oil. A much more serious consequence of what happens if you pour oil into the engine, can be a rapid wear of the pump for quite a short period of time. But it is in the material plan will be very substantial and painful.
In addition, because of the occurrence of coking of oil will be affected by not only the motor pistons, but the elements inside the combustion chamber.
This problem will become even more significant, the greater the mileage the car has. The new units will be able to survive the stress not globally, though will grow old much faster. But for engines with good mileage, even if a little poured the oil into the engine, it can have more serious and harmful consequences.
So, what happened is that the oil in the tank was too much. What happens if you pour oil into the engine, it is already clear. So leave the situation without change is impossible. An urgent need to resolve too much. There are two ways to deal with this problem:
If the level on the dipstick shows too much level from the maximum, a fairly simple way will be the usual suction. Best engine before the procedure slightly warm, but the oil does not boil.
Suction is performed in the following way:
This method will help to extract as much oil fluid, so joined by negligence in the tank. The only drawback here might be that if oil handled too much, it is time for it to spend too too much. And if, moreover, the oil zapaterias, this procedure may become even dangerous. In this case, it is better to use another method of removing excess oil.
This method may only be used when the motor is well cooled, otherwise you can get burned even from the heated tube.
So, the sequence of actionsis as follows:
At the end of the dipstick check the oil level. Because the engine is bad not only when it is too much, but also when lubricants are not enough. Therefore, if necessary oil top up. This method has several disadvantages:
So basically I prefer the first way of removal of excess oil. And though it is a longer, but cleaner and more economical.
For the crankcase drain is resorted to only when time is absolutely not, or in the case of oil foaming.
Of Course, not to get this trouble and not spend on her a lot of time, it is better when oil is changed, be careful and regularly check the level on the dipstick.
A Person can live without eating anything for twenty days. Sometimes he may even benefit. But for the machine oil starvation exclusively harmful and contraindicated. Without lubricating fluid motor very quickly fail, because its operation ensures that lubricant, by which he will live long and healthy.
We already found out what happens if you pour oil into the engine injector: flooded motor, all characteristics will gradually deteriorate, as the oil perenimaetsya Nagornyi particles and the wear elements and oxidized. You can verify this Bay a light oil and letting it run for a few minutes. Checking it after, will find that it was noticeably darker. The cause of deposits which accumulate during operation in the fluid and clog up the grid of the receiver. Because of this, the oil channels are significantly reduced in size. From the camshaft bearings and crankshaft bearings will experience lack of fluid. And this, in turn, may lead to breakage of the power unit.
The ability of operating without lubrication of the engine will be much less. Property of the oil is staying on the surface. Therefore, when temperature increases, the oxidation does not occur. That's why it should have excellent low-temperature characteristics to run the motor with no problems. At the same time high-temperature properties protect the engine at maximum load and rpm. Thus, sludge and carbon deposits formed by a very small number.
As you can see, in the life of the motor plays a huge role lubricating fluid. Therefore, if you poured the oil in the engine that will: VAZ or a foreign car, doesn't matter. The consequences will be serious, if you ignore the question and drive on. Some time travel will be possible without problems. But then their will be a lot. By eliminating the excess fluid you can protect yourself from this.
Follow the oil level carefully, and then the motor will serve faithfully and conscientiously for a long time!
Article in other languages:
TR: https://tostpost.com/tr/arabalar/34810-e-er-aktarmak-motor-ya-perelil-motor-ya-etkileri.html
Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."
Related News
"IZH 350 Planeta Sport" – frisky Soviet bike
it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...
"Tesla Model S": specifications (photo)
“Tesla Model S” – is a 5-door electric car, which is produced by the American company Tesla Motors. For the first time this car has given to the public as a prototype in 2009, in Frankfurt. And full deliveries st...
Lada Largus Cross: specifications. Lada Largus Cross photo
Lada Largus Cross – already proven class car wagon. The combination of modern design and the possibility of high permeability make this model a highly effective transportation for asphalt pavement and for heavy off-road cond...
Lada Vesta: specifications, photos
against all odds and the belief that domestic engineering can bring new ideas in 2015, the group “AVTOVAZ” presented the car, which drastically breaks the stereotypes and ideas about the whole range of Lada in General....
Koenigsegg One: everything interesting about the Swedish hypercare $ 2 million
Koenigsegg One – this is a car that is simply impossible to describe with words. Hypercar, which on the spot impresses with its technical characteristics. When the Hennessey Venom GT set his phenomenal record speed, amountin...
Cars Honda Inspire: specifications and reviews
Honda Inspire – a car that started its history in 1989. And then the model was called a little differently. Namely, Honda Accord Inspire. Such performance as hinted at continuity. But three years later the superfluous word h...
Comments (0)
This article has no comment, be the first!