"Nissan Almera": tuning with their hands, description, features and reviews

To improve the technical qualities of upgrades, car «Nissan Almera”. Tuning involves multiple changes to the structural elements of the car. This includes: replacing parts of a body, interior, suspension and engine. This operation is aimed at improving performance and quality characteristics of the vehicle.

External tuning

The First stage of modernization becomes a alteration the body of the car «Nissan Almera”. Tuning the outer part – it's a change of machine design with the addition of details that reinforce the technical characteristics. So, the installation of aerodynamic kits improves the quality and flow of the oncoming air flow.

External tuning «Nissan Almera H16" involves the installation of modified parts:

• Front and rear bumper.
• Spoiler (wing) on the trunk lid.
• Scuff plates.
• Air Intakes of the hood and roof.
• Air Vents glass.
• Grille.
• Grille of the air on the front fenders.

There are many ways to manufacture the part, but the most widely used is the fiberglass. It holds its shape well, is light weight and sufficient strength not to break under the pressure of the oncoming air flow.

The Modification of the interior

The Second phase of improvement is a change in the interior of the vehicle as “Nissan Almera”. The salon – the refinement of the inner world of the car that can be practical favor, adorn and Express the individuality. A complete change of the interior is done in several steps:

Recommended

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

1. Complete disassembly of interior includes:

• The Dismantling of the seats. This will require a head 14, which will work loose bolts of the ski. It should be noted that you must first Unscrew the front fastening elements, and then back. If you do the opposite, it will be hard enough to get to the rest.
• Remove the instrument panel. You should Unscrew the 16 screws, which are hidden in different places under the plastic plugs. Before you remove the instrument panel, is to dismantle the media system, steering wheel, heater control panel, light controllers, control and instrumentation panel and glove box. Also have to disconnect all the wires that are connected to the instrument panel.
• The dismantling of the stands and lining the ceiling is held with a screwdriver. Will need to carefully remove all plugs and clamps and then to remove the details.
• Once the interior disassembled, it will be possible to remove the carpet.

2. Preparation of parts and installation:

• Replacement seats. They can be purchased in specialized stores. The most common are the outlets from the company “Spark”, because they have the standard mounts and easy to install.
• Padding of the instrument panel. First you need to decide which fabric will be hung on regular plastic case. Many motorists choose Alcantara or leather. It is easily installed and is longer than the others.
• Modification of the racks and ceiling is the same material as the instrument panel. While the color scheme of the choice of material is wide enough, and any car owner will be able to choose what you like. Pasting is done with a special adhesive that you can buy where you sell the material, and a rubber spatula, which leveled the surface and the air is removed.
• Falls On the floor samovyrazheniya, which is hidden under the carpet.

Also you can install speakers in the door cards. This is done easily with the help of screws. The Assembly is made on regular seats. For those who want to stand out, offers ready-made door cards under the sizing material with the convex bottom of the circular openings of the columns.

Software engine tuning

Chip tuning «Nissan Almera” – firmware on-Board car computer to increase power and driving dynamics. To commit this operation, you will need a laptop, connection cable and PC auto, software, firmware appropriate version.

The Ideal option for the firmware of the motor is the kernel version of 28 for “Nissan Almera”. Engine tuning in this case is performed in the following sequence:

• The Laptop connects to the vehicle and run the recognition software of the ECU.
• The Old firmware is erased completely.
• Using the software is filled with the newest version.
• Turn on the ignition. While onboard PC should show about 20 errors.
• Reset settings, and everything works.

28 the core of the firmware enabled features that enhance the performance of the car, namely:

• Fuel Injection is carried out early in 0.25 seconds.
• The Flow of incoming air through the throttle increased by 17%.
• Injection Quantity is increased by 22%.

Physical engine tuning

In order to increase the engine's power to “Nissan Almera", tuning is done by replacing some parts on the improved. You will have to install the following parts:

• Lightweight valve Japan Power 070022.
• Pistons andthe connecting rods from JRW that are lighter than the standard 38 grams.
• Throttle AWD.
• Camshaft WRR.

All of these replacement parts will allow you to lighten the weight of motor and increase power characteristics, adding to the car 45 more horsepower.

Alternative optics

Tuning headlights «Nissan Almera” you can even order over the Internet. The main well-known manufacturers of alternative optics for this model are StandFree, Fire Light and SRS light. All of these companies represent Japan and spetsializiruyutsya for tuning headlights for Japanese vehicles.

Tuning with your hands

Many motorists do, the tuning of the ‘Nissan Almera” his hands. So, is the development, design and manufacture of the following parts:

• Exterior body kits.
• Replacement car interior by constriction of the interior parts.
• Tinted Windows.
• Painting and airbrushing.
• The Installation discs.
• Installation of multimedia acoustic systems.

All these motorists can do themselves, without resorting to expensive tuning. It is much cheaper, but takes a lot of time and effort.

Create external tuning details

Creating customized spare parts requires some experience. The bulk of parts produced from fiberglass. For “Nissan Almera" tuning with your hands is worth doing slowly.

Manufacturing process of exterior body kits:

• Based on the front bumper, which is measured.
• The computer-modeled future detail with all the measurements and calculations of aerodynamics and streamlining.
• After finished drawings, with pieces of fiberglass with hardener manufactured replacement part. It is worth considering all fasteners necessary for installation, because when the fiberglass hardens, it will not be able to fix something.
• Detail painted after the preliminary stages of puttying and priming.

Thus, it is possible to obtain the finished part, which will be installed on the car.

Installation with your hands

The Installation with your own hands is done slowly. Have factory parts, as a rule, fastenings are regular in nature and are installed on standard seats. In case of production of the spare parts on their own vehicle enthusiast should consider this point and include the attachment. Of course, in some cases, you will need to make additional holes and install the fasteners that are not factory. Then you must think about the processing of such places anticorrosive or other protective means.