Grille with your hands on the Lada Kalina

Date:

2020-02-18 16:20:10

Views:

431

Rating:

1Like 0Dislike

Share:

Table of contents:

Many car owners put on their cars is not only expensive, but also non-standard grille, though the grille with your hands will cost much cheaper, especially for motorists who do not miss the time to contribute in a favorite car, it will not be difficult. Need only some free time, patience and desire.

Present to your attention a kind of mini manual – how to make the grille yourself on the Lada Kalina.

For the manufacture of the radiator grille do not have to have any special tools. Everything can be done from scrap vehicles and devices. It is worth noting that the grille with your hands – a difficult job which requires attention, time and patience.

You'll need:

varnish, primer and paint;

plaster

some Board or in a container where you can mix the necessary ingredients;

a piece of any fabric;

- the file;

- sandpaper.

First we need to established the grille to cut all the edges, but if you cut everything, the fragile structure can and does collapse, and to restore it would be almost impossible. You have this problem, after cutting each of the parts using putty to strengthen your future bars.

The Grille with your hands – a laborious work, and it should be approached responsibly, because the smallest misstep, all the work can go down the drain. Next, you should align your design with the help of putty. Install the grille on a flat surface and with a little effort align the edges of the frame.

Recommended

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Then, to make your frame stronger and more durable, it is necessary to completely coat it with plaster, and then your entire design is to go (carefully) sand paper. To damage putty was more gentle, it is better to use water. However, in the case of the layer of putty minor injuries or depressions to correct the situation, causing a thin layer again and again sakuru product.

In the next phase, when the piece is ready for painting, you should thoroughly degrease the surface of the putty any existing solution that contains alcohol. Here may be suitable such as acetone and ordinary Cologne. You can now apply your detail first coat of primer. Apply it carefully to avoid streaks, then leave to re-application for about 6 hours. Then you need to re-apply the primer and on the day to leave the frame to dry in a well ventilated and heated room.

A day after the full drying of the primer, you can begin to paint. Apply a coat of black paint and then leave the item for a day until it dries. Then again apply a coat of paint, but leave to dry for a few hours already, in order to secure a finish layer and left for some days in a well-prepared (ventilated and warm) the room your item.

Now the product is almost ready, and you can move on to applying a protective layer of lacquer. After that, the grill again you need to leave alone for 24 hours. To complete your work, you will need the mesh in the grille, which can be extracted from the old used filter KAMAZ, cut off at the required size and abasiri. After preparing the mesh for painting you can apply a coat of powder paint, to ensure that she does not fly. Leave to dry. And the next day, apply a final coat of varnish. After complete drying of the varnish attach the net straps to the back of your frame, and everything! The radiator grille is made! Now you can set the item to auto.


Article in other languages:

AR: https://tostpost.com/ar/cars/21157-grille-with-your-hands-on-the-lada-kalina.html

BE: https://tostpost.com/be/a-tamab-l/38701-rashotka-radyyatara-sva-m-rukam-na-lada-kal-na.html

DE: https://tostpost.com/de/autos/38264-der-k-hlergrill-mit-seinen-h-nden-auf-lada-kalina.html

ES: https://tostpost.com/es/coches/38041-la-parrilla-del-radiador-con-sus-manos-en-el-lada-kalina.html

HI: https://tostpost.com/hi/cars/22761-grille-with-your-hands-on-the-lada-kalina.html

JA: https://tostpost.com/ja/cars/20747-kalina.html

KK: https://tostpost.com/kk/avtomobil-der/39107-reshetka-radiatora-z-oldarymen-na-lada-kalina.html

PL: https://tostpost.com/pl/samochody/40730-kratka-ch-odnicy-z-r-kami-na-lada-kalina.html

PT: https://tostpost.com/pt/carros/40400-grade-do-radiador-com-as-m-os-sobre-o-lada-kalina.html

TR: https://tostpost.com/tr/arabalar/35586-radyat-r-zgaras-kendi-elleriyle-lada-kalina.html

UK: https://tostpost.com/uk/avtomob-l/39517-resh-tka-rad-atora-svo-mi-rukami-na-lada-kalina.html

ZH: https://tostpost.com/zh/cars/27769-grille-with-your-hands-on-the-lada-kalina.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

The density of diesel fuel

The density of diesel fuel

the Main consumers of diesel fuel are trucks, construction and agricultural machinery and rail transport. Recently, however, diesel fuel can be found in passenger transport. For all drivers debated issue has always been its price....

Pumping the brakes

Pumping the brakes

If the brake pedal move was "softer" (to fall), and its stroke increased, then the system has air. This affects braking efficiency. Pumping the brakes just need. Otherwise, the creation of emergency situations is guaranteed. bleed...

Chevrolet Cruze, reviews and recommendations

Chevrolet Cruze, reviews and recommendations

this Car first appeared on the market three years ago and immediately earned the most favorable reviews. Chevrolet Cruze was designed to be a continuation of the line model, the Lacetti, which is why he has been defined as J300, b...

What is spoiler and what are its main functions?

What is spoiler and what are its main functions?

Even if you do not belong to the world of Motorsport and have never been fond of sports cars, you've probably heard this foreign word and at least once thought about that, but what is the spoiler? Offer you to get acquainted with ...

What is ESP. Security in the car

What is ESP. Security in the car

Many drivers know that the car is a source of danger on the road. So it is important that all security systems – both passive and active – were in excellent condition and has been capable in case of emergency to preven...