Easy to install rear camera in car

Every modern car owner should study the manual for installing a rear view camera to learn how to do it properly. There are different types of cameras on the market. First you need to find the best. Most of them are quite easy to install.

Installation Guide

You Can install a rear view camera on the car yourself after reading the manual or watching tutorials on how to do it correctly. After reading the books, you can find various recommendations that need to follow.

It is equally important to have an idea about the installation, which will help in the process. Even a beginner can easily make the rear view camera according to the instructions.

Methods

There are various ways of installing the camera. One of them includes a system of trigger-based. After studying the device the next thing to know is to install each of the components, because the camera can't work if all the parts are not installed properly.

Remember that the rear view camera using the same features, and this means that if you have installed any camera before, it will not be difficult to put in its place another. If you want to use trigger leads, the information provided here will help in the installation process.

Basic details

To install rear view camera on their hands would need the following elements which include:

• Camera;
• Wiring harness;
• RCA cable.

You need to install the camera?

Without these components, the installation will fail:

1. Camera is the most important element that is needed during installation. In appearance it is similar to the monitor. This is due to the fact that it has a single cable and plug DC power supply, and RCA cord. It is necessary to monitor objects during the ride.
2. Wiring Harness is another tool needed to connect and install. It includes connector DC power. It dvenadtsatiletny power wire and black ground wire.
3. RCA Cable is another item needed for camera installation. Usually includes a yellow RCA video cable is used for video communication. A function designed to supply the image from the camera. Cable length can vary, it ranges from 8 to 25 meters.

In addition, it is important to specify that during the installation process, these cables are used in different ways. For example, the yellow inputs are only for video, while red and black is designed to supply. You can also install a mirror with a rear view camera that will transmit the image using the same tools.

Recommended

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Installation Guide rear view camera

In addition, it is important to recall that most of the monitors are not equipped with trigger cable, and that's because they have the function of so-called “videocamstitlive”. Video stream always starts them automatically.

Installation Process

The First phase of the installation process rear view camera Ford or any other brand of car is that you need to apply electricity to the monitor, make it simple, connecting the red wire to the supply voltage. To send power to the monitor, go to the fuse block. The method of operation of the monitor is determined by the cable run used to connect.

The Best option to install it is to connect to the rear lamp of the car. When this is done, the monitor will turn on automatically when it becomes active reverse.

If you want to set the monitor to manual control, it is not necessary to connect. The connection can be made in the source, and this means that whenever the car starts, the monitor turns on. It turns off when you turn off the engine. This mechanism is best for those who use commercial vehicles.

How to install the camera? For this connection just plug the wiring harness A4, which is known as covering the harness to camera output. Usually it is considered as the output of the mama.

At the stage of power connection to the monitor and to the camera, you just need to attach the red wire to 12 volts. Alternatively you can do this by connecting to the positive side of the tail light of the car.

Install monitor

When you are sure that the monitor is connected to the fuse block, and the camera equally consumes power from the tail light, it's time to configure the system. Continue the connection by connecting it to the camera. When you do this, use the standard yellow cable A5.

Connections based on the video

Guide to installing a rear view camera "Mazda" orother brands of cars, referred to above, refers to a system based on the video. It is designed for systems based on triggers. The first thing to do is to understand all of the components that ease the installation process.

Features

To connect based video requires elements that include:

• Monitor;
• Wiring harness for monitor;
• Camera
• Harness camera;
• RCA cable.

These are the basic components that are required for this type of connection. They must perform important functions.

1. Monitor. For this installation the monitor is indispensable. It includes video inputs. Inputs for RCA cables that have different socket for the red, white and yellow cables. White and yellow is for the video output. If accustomed to such transactions in your TV, then the installation will not be difficult, because it repeats the same process the transaction.
2. Wire to the monitor. This is another important aspect of the installation process. The monitor is equipped with a wiring harness that is always attached to red or black connector DC power. On the opposite side - two wires. They include the red wire, and black. Black is ground and red wire the adaptor to the positive power.
3. Camera. It is the most important part of the system. It's not the same as trigger connection. In some ways they are different. It has two parts. This type of camera requires no large holes, it can be connected in a waterproof way.
4. Posting to the camera. Includes DC Jack, and it applies the power wires. Connector DC power connects to the 12-volt output power as well as black for grounding. It uses the entrance of mama, which is 12 volts.
5. RCA Cable. Another aspect of the installation process is the RCA cable. This is an important point in the installation. Video cable RCA connects directly to the camera. It is used to supply video to the monitor.

How to install a rear view camera? Response to the video.

Stages

To install the camera on the basis of the video will need to perform a number of steps:

1. First step. Connect the wiring harness to the DC-in monitors designed to feed. Need to determine and make the proper connection.
2. The Second step of this connection is to connect monitor power connect the red wire to 12-volt power and black to ground. Usually the amount of power going to the monitor is taken from the fuse block.
3. Third step. It's time to connect the video signal and the power of the camera to the camera connector.
4. The Fourth step. Power the camera, simply connect it to the red wire and 12 volts. The black cable should go to the ground, as usual. Power is supplied to the camera, often comes from the tail light. In this connection it is important to indicate that whenever the power reaches the camera, it include the monitor. This means that it works automatically. It is important to repeat that when you want to connect to the connection cable length is important, as in connection on the basis of the trigger. Because of this, it is recommended to consider the length of the cable. The best length is between 6 to 25 meters.

In some cases, the cable contains a red wire, he can always become a part of this cable. Usually the cable conductor used for this connection type is raw, so it can be used for different purposes.