How to make a cover for the knife with his hands?

Many hunters know that to remove the knife much harder than removing it. So most of them are very responsible approach to the selection of the sheath. However, some newcomers do not know how to choose the right case for a knife.

Brief history

The history of the manufacture of the sheath began in the XIII century. At the time they were popular not only among men but also in women. Already in those days universal knife with identical success used both for cooking and for hunting. In addition, it was considered an essential attribute of equipment valiant warriors.

In that era were especially popular holsters for knives from the skin. The inner side of the sheath called the membrane, and the outer was considered the front. To enhance the water repellent properties of the surface of leather covered with special protective layer consisting of oils and fats. Before you can make a case for a knife, Our ancestors chose a piece of calfskin, the thickness of which was only two millimeters. During the archaeological excavations, scientists were able to find a sheath made of cowhide, goat and sheep leather.

What to look for when buying?

Choosing a case for a knife, it is necessary to pay special attention to the material from which it is made. Because on its quality depends the life of the sheath. You should not ignore the fact how comfortable you any instance. Ideally, the knife should be easily removed from the case. The mouth of the sheath should not be not too narrow, not too wide.

Buying a case knife Should pay attention to what and how it is attached. It should not be a complicated locks and clasps. A quality sheath is made not just of leather but also of wood, covered with this same leather. In the process of selecting, consider the type of knife that will be stored in them. Ideal for small leather pouches, and for large hunting knives-wood.

Recommended

Do you know what date Youth Day is in different countries?

In almost all civilized countries, there are various public youth organizations that represent the interests of girls and boys who are actively involved in social life. Of course, the State is the guarantor of their rights. Or, more precisely, the le...

JBL's portable Flip audio system: speakers for the soul!

JBL is one of the leaders in the global speaker market. Speakers from this manufacturer have been for many years delight fans of high-quality sound. The JBL Flip wireless portable speaker is one of the most prominent representatives of its model ran...

How to swaddle children: tips for young mothers

"Swaddle tight, otherwise your legs will be crooked!"; "Swaddle tightly so that you know who is the boss in the house!" - these tips from our grandmothers seem to us, young mothers, remnants of the past. There is also a diametrically opposite point o...

How to make a sheath for medium to large hunting knives?

Unfortunately, not all stores you can find a suitable case. Those who failed to do so, do not worry. Because you can make a case for the knife with his hands. For this purpose it is necessary to stock up on a thick piece of felt, leather belt, layered plywood, epoxy resin and hardener, Mylar, thread, sandpaper and a file.

From layered plywood should be cut two plates, the shape of which is identical to the knife blade. The size of the workpiece should be slightly greater than the dimensions of the blade itself. The surface of both plates need to handle the epoxy resin with the hardener. The top should be glued in advance cut the felt. After the glue dries you can trim the excess felt. Then you need to take both the workpiece and attach them to each other so that the felt part was inside. Next, using epoxy glue a loop of leather belt. Plate of the sheath are treated with epoxy resin and immediately tightly wrapped Dacron thread. Waited for the glue to grab threads and plywood, you can apply a fresh layer of resin and wound another layer of thread. For greater strength it is recommended to make at least four such layers.

After the complete hardening of the resin can proceed to the grinding of the sheath. To give them the desired shape using a file and sandpaper. The finished product has an aesthetic appearance, it is necessary to paint or wrap the braid.

How to make a cover for knife made of PVC?

For the production of such a sheath must be reserved with a sharp knife, heat gun and a piece of PVC pipe, which is widely used in the implementation of the plumbing work. The latter can be purchased at any hardware store. For the manufacture of such a sheath will require no more than half an hour.

First, you need to cut a piece of pipe of the desired length. Making on the tube a longitudinal incision, it is necessary to soften with an industrial Hairdryer. After that pliable plastic can be folded into the sheath. Surpluses are cut with a sharp knife.

After that you need to invest in a case knife and re-heat the plastic near the handle. The softened material can easily make a comfortable notch under the handle. For fastening of a sheath is necessary along the seam line to make some holes for screws or rivets. At the final stage, you need to make a mount for a belt. It is advisable to cut it from a piece of leather. Eyelet for strap fastened to the scabbard by rivets.