Staples for stapler: types, sizes. Types of staplers, by appointment

Every man at least once in my life had to deal with documents, confirms that staples for stapler (types, their sizes in this case do not matter) is much safer collate than a paper clip. Therefore, the stapler is so quickly gained popularity in the world of stationery, and any enterprise, even the smallest, can not do without this device.

What is the stapler, and what is its purpose

The Device for fastening (“linkage”) paper – it is office stapler. This small device is designed to using a thin steel wire (curved in the form of staples) “stitch” a few sheets of paper.

The First stapler appeared in the eighteenth century in France by its ruler – of Louis the Fifteenth. However, the staplers were more interesting gimmick than an important device.

But John McGill in the mid-nineteenth century (when actively began to develop the science and bureaucracy) saw opportunities in the manufacture of staplers and slightly refined the model of the time of Louis the Fifteenth, patented this device. Soon made of brass stapler, John McGill, is capable of reliably and quickly, stapled sheets of paper, has become an incredibly popular fixture.

Types of staplers by appointment

Since the advent of the stapler, it took many years, and during that time his design was perfected. So today there are several types of this device.

The Most cheapest and popular pocket stationery staplers. They are small in size and is able to staple up to ten sheets. As a rule, they are staples for stapler “10”. They are intended for binding the sheets in the traffic. For example, leaving the Bank to issue the documents. More often they are used by pupils and students to bond in their essays. That is why very often, pocket staplers have bright, even a little “toy” design.

Recommended

Every girl should have a good epilator

Many girls who constantly take care of themselves are forced to use a razor. This often causes irritation, and unaesthetic hairs grow into the skin. It's not a pleasant feeling. But to stop removing hair on legs, armpits and in the bikini area is not...

Infant formula for newborns. The basics of choosing and the list of the most popular

Feeding a newborn baby is, at first glance, an elementary thing: pour and drink. It's exaggerated a lot, but the point is true. Nature has thought out what and how our children will eat, if not for one "but". What should I do if I have nothing to fee...

Note to housewives: what kind of frying pan is used to cook a particular dish

Everyone knows that such a kitchen appliance as a frying pan is necessary to fry cutlets or croutons, cook crispy potatoes and brown meat, bake fish or vegetables in the oven. But any housewife keeps far from one frying pan in her cupboard, but 4-5 p...

The Price of such devices is small, however, as the service life.

Desktop staplers in appearance very similar to pocket, but they are more powerful and larger. Typically, they are used in offices or small companies and in schools and universities to do “linkage” documentation. Depending on model, they can bind ten or more sheets.

Specialized stationery staplers have a slightly different design than the previous species.

They Have a lever to press, such as a stapler at a time can flash about two hundred and fifty sheets. So it uses more long and sharp staples for the stapler. The price of this device is quite high, so it is often used in larger offices and in printing.

All of the above models was the mechanical type. Also, there is an automatic office stapler. It reacts to movement, and in an enabled state to attach the paper, just enough to shove them into a hole of the stapler. Such a device operates on AA batteries or from the network.

In the late twentieth century was invented by Christian Berger new stapler, “binding” the documents using paper tape, cut from the fastened sheets. This device does not need braces.

Also there is a construction stapler. However, unlike stationary devices, even though he uses staples, but not pierces them through and do not bend. In other words, staples construction staples perform the role of bent nails.

In addition to construction, there are also packaging and industrial staplers.

Staples

Staples – a small u-shaped wire products, which “stitched” paper.

Depending on the purpose they are different in length, width and metal from which they are made. To better pierced the paper, the tips of the legs of the staples are always sharpened.

In early models of the staples had to be inserted one at a time. However, in the twentieth century Boston Sticther Wire Co. came up with a way to fasten with glue, staples for stapler. Styles, sizes staples now didn't matter. Bonded with glue, they are easily refueled in the device, simplifying its use. Since then, all the staples are sold in the form of glued strips which can be easily inserted into the stapler.

Staples for stapler: types

The Size of staples for staplers are different. However, before we deal in them should pay attention to their types. So, there are staples for office stapler and for industrial. The main difference not only in the types of staplers, for which they are used, but in the thickness and strength of the braces themselves.

Office supply staples for conventional hand-held or table-top units made of thin but fairly soft wire. For packaging, construction and heavy duty office staplers use staples from moredurable material.

Dimensions of staples for office staplers

Each stapler corresponds to a particular size of staples. It all depends on the number of sheets that you want to flash.

The Most common staples for stapler - “10”. Most of the other staples, differing from the standard “10”, the name is just two numbers. First – room, and the second – the length of the pointed legs of staples.

The majority of the staples for stationery ‘crosslinkers”, the length of the legs is identical, but the size may vary. Therefore, before deciding where to buy staples for stapler (the price is usually small), you need to carefully read the size on the package from the device.

The little paper clip has a size of “21” - length of 7 mm, whereas in the traditional “10” - 9 mm. is The biggest stationery clip is “24”, the length of legs she can be as 6 mm and 8 mm. So when you buy need to be very careful.

The Most common staples for staples (8mm leg length): “24/8”, “26/8”. When the length of the legs 6 mm – “24/6”, “26/6”.

Staples construction staples

Unlike stationery stapler, construction most common size of staples – «53" (width of 11.4 mm and a length of 4-14 mm). They are suitable for most construction vehicles, regardless of their subtypes. By the way, many construction staplers with its versatile design can use several types of brackets.

For more durable “linkage” wooden and other surfaces used brackets under the numbers "36”, “140”, “300” and “500”. Since the length of the legs, all of these rooms can be very different, then you need to read very carefully the accompanying documentation.

Prices on staples for stapler

As a rule, the cost of braces is quite small - about 15-30 rubles for a thousand pieces of size "10" (office furniture). Staples size of "24" or "26" are a bit more - 30-60 rubles per thousand pieces. Specialized brackets designed for a particular model of stapler, are more expensive. As a rule, the price regulated by the manufacturer, and often there is a big margin for the brand.

With regard to the construction of staples for staplers, that due to the use of more expensive materials in their manufacture they are more expensive stationery. So, the most common size of "53" on average costs about 300 rubles per thousand pieces. Other sizes and specialised staples cost more.

How to insert staples into stapler office stationery

Knowing what are the staples for stapler, types, their sizes, you need to understand how to insert them in the device itself.

In most such devices is to insert glue bonded bracket, you must open the top cover, pushing the spring. Then place in the vacant compartment bracket and release the spring, which immediately locks them in. Next, you need to close the lid of the stapler and check for any piece of paper if it works. If sheets of paper are sewn together as they should (curved bracket that uses two or more), it is necessary to check the correctness of filling, and size.

How to insert staples in the electric (automatic) stapler

In automatic stationery stapler staples are inserted a little different. Before you do this, the device must be disconnected from the network or pulling the battery. Next, clicking the button “rev”, to nominate slot brackets on top of the contact paper. Insert the staples, slide the slot, turn on the machine and see if it works.

How to insert the staples into the stapler construction

The Most commonly used construction mechanical stapler. Filling in his brackets - a process quite similar to the use of office device. To insert a glued bracket, it is necessary in the lower part to pull the spring. Then gently place them in an outdoor connector and secure it by inserting the spring until it stops back.

After completing the installation brackets need to test the device.

Today, a stapler, along with a hole puncher and a folder, the folder became an inherent part of every office and also a workshop (if it applies to building type). To pick up staples to any of these devices, as well as to fill them is not difficult, even a child. The most important thing is to be clear about the size and type of staples and not to neglect safety rules.