How to change the battery in a wristwatch? It's very simple!

Watches – an attribute that exists in almost every person. It's not just a good thing. It-also a perfect decoration addition to your outfit. In short, the accessory, the acquisition of which you do not have to regret. But what to do in the case when you have the battery? How to solve this problem? How to change the battery in a watch yourself, unless you have a similar experience? As not to damage the mechanism?

How to change the battery in a wristwatch? Do I need a wizard?

So, where to start? As a rule, people used to refer to specialists. Of course, this is the easiest option. Masters know how to change the battery in a wristwatch. However, you can handle it on their own. The key is to know what battery was installed by the manufacturer. Putting exactly the same, you represent and warrant to the mechanism a long life. You need to look at the type of battery. The abbreviation SR says that battery - silver-zinc. CR-lithium. These batteries are the most durable. Most often they are used by manufacturers.

Knowing how to change the battery in a wristwatch by yourself, you can avoid the installation of cheap alkaline model, denoted by the letters LR. Unfortunately, unscrupulous webmasters sometimes do. Are such batteries not last long. In addition, they hold loosely the tension in the mechanism. In the end, watch quite quickly begin to lag.

Remove the back cover

Of Course, models with batteries – it is very convenient. They do not need to have. But the battery – a thing is not eternal. Why it has to change. In this procedure, there is absolutely nothing difficult.

Recommended

Every girl should have a good epilator

Many girls who constantly take care of themselves are forced to use a razor. This often causes irritation, and unaesthetic hairs grow into the skin. It's not a pleasant feeling. But to stop removing hair on legs, armpits and in the bikini area is not...

Infant formula for newborns. The basics of choosing and the list of the most popular

Feeding a newborn baby is, at first glance, an elementary thing: pour and drink. It's exaggerated a lot, but the point is true. Nature has thought out what and how our children will eat, if not for one "but". What should I do if I have nothing to fee...

Note to housewives: what kind of frying pan is used to cook a particular dish

Everyone knows that such a kitchen appliance as a frying pan is necessary to fry cutlets or croutons, cook crispy potatoes and brown meat, bake fish or vegetables in the oven. But any housewife keeps far from one frying pan in her cupboard, but 4-5 p...

So how to change the battery in a wristwatch? It all begins with removing the back cover. It can be pressed or twisted. In the first case, the cover provides for a special recess. There is inserted a small screwdriver. Cover gently podtseplena and removed. At this point, the main thing - to hold fast to watch.

If the back cover has several indentations in a circle, her need to Unscrew. Easiest way to do this with the help of Vernier caliper. The tool is inserted into the two recesses, and cover, turning counterclockwise, carefully removed.

Replaceable battery

What's next? How to open a wrist watch to change the battery – clear. Then, you must find the battery, remember how and what position it is fixed. It is important not to confuse the polarity.

Retrieves the battery with the help of small tweezers, and it is replaced with a new one. As long as it was of the same design and specs as the old one.

When you install the batteries it should not be taken by hand. To use to the same tweezers. After installation it is necessary to check, whether the clock. Only after this cover back into place. In short, nothing complicated.

Set cover

So, the final stage. If the cap screw, it must screw with the help of Vernier caliper. Don't forget also that if the clock was set gasket, you need to follow to see if it is in disrepair. Otherwise, it is also necessary to replace. If the same strip could not find, you can use a bit of sealant, causing the threaded portion.

The cover is Pressed in the clock back on a flat surface. You should always make sure that the groove corresponds to the axis of the wheel to change the position of the shooter. After this, take a small flat object (preferably wooden) is located on the lid and gently pressed down on top. To get back on point it needs without any problems.

Thus, knowing all the nuances of how to change the battery in a wristwatch (Casio Oreintex or any other company), you can easily cope with this task. And, most importantly, do it quickly and correctly.

Be careful

It is Important not to forget about care. If you damage the mechanism, you can already watch and your not “save”. For example, removing the lid, podzeplje it very carefully. Watch need a good fix, and the tool to press accurately and strongly. By the way, these measures are necessary in order to avoid injury.

Changing batteries, remove and insert them as accurately as possible. Tweezers should not touch key elements. In short, all you need to be careful.

When you close the lid carefully check the water resistance. If you press with your finger it still does not close, use, for example, a wooden mallet used for crushing berries, potatoes, etc. This way you will be able to put pressure directly on the entire surface. In the end, it will be completed.

However, if you are in the forces still are not sure, you will always be able to find a place to change the battery in a wristwatch you can quickly and without problems. Fair good masters always find in every city.