Reinforcing mesh for reinforcing concrete masonry

In the modern construction world the reinforcing mesh used to reinforce concrete masonry, reinforced concrete or gypsum structures, and a special kind of mesh used in the manufacture of reinforced glass.

Properties of reinforcing mesh

The Main technical characteristics that form the market price of the mesh and affect the final choice buyers are the cell size and the diameter of the rods of which it is composed. The rods can be smooth or grooved with a diameter of 3-5 mm. Production material of the mesh are divided into a metal and a polymer. First serve for reinforcing cinder block, concrete or brick walls, while the second is called plaster or paint. Thanks to them, on the surface svezheoshtukaturennoj walls will never crack. But when reinforcing mesh is missing, or laid in violation of the technology, defects appear certainly. Polymer mesh is impregnated with a special, resistant to alkali composition, which makes them practically invulnerable to the effects of sharp temperature changes, corrosion, etc.

Specifications

High Quality reinforcing mesh has the following characteristics:

• Very resistant to tearing and stretching.
• Helps to overcome the internal pressure caused by changes in humidity and changes of temperature.
• Prevents the appearance of cracks in any weather conditions.
• Increases the level of mechanical strength of the wall.
• Material resistant to alkaline environment, which is very important when you consider that almost all of the solutions used in the decoration of buildings, alkali.
• Reinforcing mesh for plaster and all other types of technologically advanced and easy to use.

Reinforcing mesh for the floor

The Reinforcement of the floor is made in cases when the layer of concrete laid on the screed, 80 mm. thinner Despite their apparent power and strength, concrete – is quite brittle material, especially when experiencing constant vibration and dynamic load, therefore, operation reinforced network entirely justified. In some cases, reinforce some areas of your floor or mesh is used to reinforce the seams. Due to reinforcement it is possible to save on the amount of concrete, because this procedure allows to reduce the thickness of the tie layer without compromising quality.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Nuances…

Reinforcing mesh made of metal is attached using dowels, which are hammered in a checkerboard pattern at a distance of 20-30 cm from each other. Wire mesh is attached with strips overlapping. Polymer web is glue on any filler (except the finish). The mesh strip also glued lap or as close as possible to each other (up to 1 cm) and follow to the junction of the grid does not coincide with the lines of the appearance of expected cracks. Reinforcing mesh for floor and walls attached between the layers of concrete screed or plaster. Such a network is used for insulation of facade walls with mineral wool or foam. It is frost resistant, lightweight, non-corrosive and easy to use.