The idea of restoration of furniture with his own hands: photo. Restoration of old furniture

Restoration of furniture with his own hands – a great opportunity to extend the life of any interior, make them bright and colorful designer decor. These processes can be complex and not. Directly it all depends on what you want to change. You need to understand that a process such as restoration of furniture with his own hands, ideas which are varied, different and some complexity.

Why it happens

Unfortunately, the furniture is quite often broken, and the causes may be different. These include their close proximity to heating devices, lack of moisture, aging, transportation and insects.

Each of these problems has a causal relationship. You need to understand that if you don't want to throw away favorite items of the interior and buy a new one, it is possible to give preference to restoration of furniture with his own hands.

Any broken object should provide immediate repair. Slowness in this case can lead to the fact that the subject is so worn that will not be until the restoration of furniture. Their hands will be impossible to do anything.

Loose veneer

Very often the furniture is subject to fining veneer, which is made from precious wood. This simple operation makes the interior interesting, prolong its life, preventing the formation of cracks and emergence of insects. Unfortunately, it also happens that the veneer peels off.

The Reasons for this can be excess moisture and dampness, which leads to swelling of the material, cracking and flaking. You can fix this.

How to fix

Initially, you need to try to iron on the veneer with a hot iron. Need to enclose a sheet of paper, so as not to spoil the material. The procedure may not always produce results.

If the visible effect is not achieved, it is necessary to make the inscription on the veneer. Over the edge of the material is raised and the base is coated with adhesive. Press the glue held until drying. Remnants of it are removed with a knife or sharp cycle.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

To whiten the seam, use a solution of oxalic acid. Processing over a colourless varnish will help prolong the effect of the result. Thanks to the restoration of furniture with his own hands can extend its service life and make the appearance aesthetically appealing.

Other problems with veneer

Restoration of furniture with his own hands (photo right shows the result) may be required if the veneer was deposited to the ground or moved on the edge. The latter problem is solved by smearing the glue piece that is damaged and lapping. To Pobeditelei coating, means for lapping suggest to wrap in flannel.

If the veneer was deposited to the ground, the damaged part glue and grind. After this you need to putty and carry out the tinting. The final step-coating the surface with varnish.

Polished furniture

Restoration of polished furniture with his own hands – available process for each. Most often, the need for it arises in cases when defects occur at the ends and corners. They can be represented by scratches or bevels.

Restoration of furniture with his own hands meant its putty and primer. The bedding is made from glue and wood flour. The last ingredient often substituted for pumice, talcum powder or powdered chalk.

The Second possibility is the restoration of furniture with his hands rosin bedding, which includes a special mixture of oxide of zinc and flour. Not to spoil the piece of furniture, you can use the color pigment of your furniture. Bedding use by heating, and sealing cracks carries out the wax, the color of which should be selected in advance.

Get Rid of scratches

The Appearance of scratches on the varnished coating – an ordinary phenomenon. The problem is solved quite simply, if you have information about how the lacquer coated surface of furniture. In this case, you will just need to handle it with solvent.

If the furniture is covered with varnish or lacquer, alcohol-based, you can use ethyl alcohol. Pyroxylin varnish coating processed with ordinary acetone or solvents 647, CR-36, and 646.

The Defects on nitrocellulose and polyester varnish can be easily cleaned with sandpaper. After processing, the surface grease, polishing paste and varnish.

Dings and chips

Restoration of furniture with his own hands, a photo of which can be found in the article, you might need to fix nicks and chips. For these purposes, use putty. It is made from wood flour, talc or chalk, to which add the glue and pigment dye. The material applied to the damaged surface and allowed to dry for a few days. After drying shall grinding and varnishing.

Another option is the restoration of furniture with his hands using liquid putty. It is applied to the desired area and put on top of the tracing paper. Using an iron set to the required form. Plus is no need to sand the surface. Simplyto get rid of the tracing paper.

Old furniture

Restoration of old furniture with his own hands will give a lot of positive emotions and new sensations. If you want to completely change its appearance, you can use sheets of plywood. They hide the ugly edges of the table or Cabinet. At desire it is possible to give preference to the putty. However, if the furniture is really old, she will not always be effective.

If there is a need to replace the very top, you can repaint it in another color. Initially, you need to Polish the surface to get rid of the old pigment possible cracks, dirt and ink. After sanding, you can begin the painting. Restoration of old furniture with his own hands will be a good lesson, and the result will look spectacular in any interior.

Replacement handles also applies to restoration. Usually, this procedure does not cause any difficulty. Enough to pick up those models that will fit harmoniously into the design of the model. The surface underneath can be sanded and varnished.

Upholstered furniture

Restoration of upholstered furniture with his own hands – the ability to breathe life into your favorite items interiors. Change upholstery – a fairly simple process. Just remove the old one very carefully, not to damage. It will use as a template for sewing the new upholstery.

Also need to get rid of possible fastening elements, for example, buttons and staples. This can be done with pliers. To remove, enough to cut one of the seams of ordinary scissors.

Gradually removing the fabric, mark places a marker, so you do not make a mistake some part is taken. If you want you can Polish the legs and other visible components.

Upholstered furniture covered with batting, neatly turning the material and fixing brackets. On the old upholstery make a pattern and cut a new one. It is important to choose fabric which will last a long time. Mount the tissue is stapled.

The restoration of the Soviet furniture with your own hands can be made by sewing capes on armchairs or sofas. This will eliminate the long process of creating new upholstery and give a new explanation of the interior.

Decoupage

If you are going to carry out a process such as restoration of furniture with his own hands, decoupage can be a great method. It will help to upgrade virtually any piece of furniture.

You will need materials such as paint, glue, ruler, scissors, paper with drawings or swipe, brush and, of course, the furniture. Look great kitchen interior, decorated in decoupage technique.

Restoration of kitchen furniture with his hands is a fairly simple process. In practice, there is no need. Lacquered surfaces it is advisable to grind. This will ensure good attachment and eliminate the possibility of creases and bubbles.

It is best to take pictures of square shape. Their coat and stick gradually. You can do the whole picture, gluing edge to edge, and you can create a collage or applique.

At the edge of the table put the paper overlap. If edges are rounded, is to make cuts that drawing went smoother if a smooth – this is not a necessity.

After the paper soaked with glue, you need to flatten it. To do this, tightly enough to press it to the furniture. Further, the material must dry completely.

Once the glue has dried up, you can apply layers of varnish, which will play the role of fixer. Cause they should be at least two. After each application you should leave them to dry.

If you seriously liked the decoupage technique, you can acquire professional attributes and create your own old furniture masterpieces.

Repair of worn components

It is Very important to repair furniture at the moment, when you notice any defect. Waiting can lead to negative consequences. One of the problems is a loose connection of parts. To fix it simply. Useful for glue and cleaning. Initially we clean the item from the old glue and grease fresh. You must grip tightly or clip design so that the glue grabbed the item. For these purposes you can use Strumica, twine or heavy objects that are placed on top.

If even after fresh gluing the cracks were left, so they should drive wooden wedges, smeared with glue. Small cracks are easily eliminated using a putty or cloth, impregnated with glue.

Threads

In stools is often the case breakdown thread where the attachment legs. It could be fixed by a nut with identical thread. Initially grinds the butt, untouched remain only two tabs. In the hole with the broken thread make cuts so that the lugs nuts they entered. After the nut is inserted and secured, it only remains to screw the leg back.

Loose stools

Rickety chairs and stools – the eternal problem of most people. Actually to solve them will not be easy. Enough to drill in the legs small holes in the struts to make them through. They tighten the screws tountil the legs with the braces will not be tied.

Loose door

Another common problem is a broken door. The reason is that the screws on the walls is not enough twisted. If an ordinary Curling problem cannot be solved, you can gently enlarge the hole. It is placed a wooden cork on glue. In such a construction is screwed in the screw that will now hold on tight.

Insects

In old furniture sometimes infest bugs-grinders. Learn about their appearance possible in the presence of small round holes. In this case, it is necessary to examine the structure from the inside. If the assumption is true, an urgent need to solve the problem. By the way, is characteristic sign of their presence is "ticking" of the sound of these insects.

It is Important to start solving problems immediately, otherwise the furniture will not remain nothing but dust. While the damage caused by insects is negligible, then there is hope to fix. To do this, fill the syringe with oil of vaseline and process design from the inside out. Top holes sealed with wax or paraffin. Suitable for this purpose and ordinary putty. The procedure should be repeated in 2-3 weeks.

If your furniture is badly damaged by insects, the sense in repairing it there. She at any moment could fall apart. The best solution would be to buy new, which adds to the interior charm and sophistication.