Track from cut down trees with their hands. Landscape design

The Road is an important element of any terrain. They should have the convenience and reliability. But if in ancient times this coating is viewed solely in terms of their efficiency at the present stage it is necessary to take into account the aesthetic side.

The Track at suburban station

The Track can be done on a country site. Thus it should be not only durable, but also appealing to walk through it was nice. Everyone would like to come to your garden and to relax from the urban bustle and daily life, to be closer to nature. And this will help to the path of the saw cut of trees. Stuff it will not be easy. Yes, and the result is worth it.

Wood, sand, natural stones, earth, pebbles – all of these options can cause a great Association. Therefore, for their use when creating tracks look different. More should be said about what constitutes wood in the development of garden design. What to do to get the path of the saw cut trees with their hands? What nuances need to be considered in this case?

Whether So banal.

No wonder at the present stage the most popular option path is one that involves the use of saw cuts. Of course, there will always be people who will talk about the banality of such a design. Because such a material is used for a long time. Accordingly, ideas about what constitutes the design of the site, available to all. But when looking more thoroughly to this option, then the feeling of his worn-out immediately lost.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Made track from cut down a tree with your own hands can be a real masterpiece of garden art, as its appearance will fully depend on such factors as the size of the material, relative positioning of components, color of wood. To give the picture the completeness will help additional items. In other words, the garden path can turn out totally different from what you imagined. Design options there is a huge amount. Consider what may be the path of cut down trees, made with all the recommendations.

Some versions of the tracks

Choosing the same size and colors components, you will be able to obtain a solid composition. Elements in this situation it is necessary to build in several rows. And you can set a random order, placing them closely. The more the diameter will be saw cut, the greater will be the gap between the components of a track. To fill it you can use chips, gravel or lawn grass.

The Dynamic track will give a saw cut of a different caliber. They revive the design of the site. You decided to take advantage of such additional material to fill in the gaps, as gravel and crushed stone? Can use one enough of the original look. Lay the drunk for each other. In this case, can be obtained direct or winding path. Everything will depend on preferences. Making a small distance between the main components, it is possible to obtain a steep path. Cutting elements, you will get continuous line.

Paths can be drawn from the boards

Creating a walkway out of wood, you can use not only to cut down. Let me go in the Board. To put this material should be solid flooring. Doing this allowed both along and across. The edges of the plates can be slightly cut. In this case, they will get a curving shape. However, this can be achieved without pruning. You just have to position boards in particular.

Using wood, you can achieve the effect of the parquet. The path in this situation will look great, if you complement it with gravel or crushed stone. The first version of the material can be used in situations where the main elements are located at large distances from each other. Paths of the tree can be supplemented not only with gravel. For this purpose you can use pebbles or other filling.

If after all the above you are interested in such a garden design, then you should talk about how to create this beauty with your own hands.

What should I consider?

It is Known that such design may be damaged through the fault of moisture and temperature changes. How to prevent the destruction of the saw cut? Erecting buildings of wood, the factor of humidity and temperature fluctuations should always be taken into account. This is especially true of tracks as the saw cut and the Board should lie directly on the ground. And the rate of decay from it only increases. All of this will go into more detail next.

Wood Processing

Cut down a tree can be purchased in specialized stores. This material will have already been processed with a special compound that protects the wood from the appearance of fungi, pests, and rotting. But you can go the other way. To make a trail of cut down a tree, do not have to buy the main item in the store.

Get or findlogs, use a chainsaw and sawed the saw cuts. Their thickness may reach 15 cm, then the material will need to be processed, using a 10% solution of copper sulphate. Instead, you can use antiseptic substance that has been designed specifically for wood.

After drying, the treated drunk you should use bitumen, pre-melt it in a metal container. In this matter it is necessary to dip spil the place that will be located in the soil. After this material is necessary to provide some time to dry. Having done all the above procedure, you will get ready for laying cross-section of a tree. Its price will be low compared with purchased materials.

Tracks

How to make a track? It is necessary to designate the place of the pegs with a rope to dig a trench the depth of which should reach 30 cm you will need to lay a geotextile. Then pour into the trench gravel. A layer of this material must reach 10 cm on Top of him need to lay sand, tamping it carefully and periodically watering. The result of all above steps, the lining must be cut down. The space between them will be required to fill the earth. It is possible to plant grass or put gravel.

To make paths in the garden cut down a tree, you can use the larch. This is the best option, as it is characterized by high strength and durability. You can also use oak cut down. The durability of this material up to 15 years. Periods of life in aspen and pine. However, they are also a good option. Spil, which was damaged either during installation, or after a few years, can always be replaced. Accordingly, this material must be reserved immediately with a reserve, so not to waste time on making it.

Conclusion

In this review, it was about how to make the path to the site using the familiar material-saw cut of wood. Using them it is possible to achieve an original and interesting design of the site. So, if you have time and desire, you should begin to act in this direction. And after some time in your garden will be beautiful and well-groomed path, pleasing of its kind.