"Tekhnoblok Standard": technical specifications of insulation

The Company "TECHNONICOL" is one of the most popular in Russia among the manufacturers of building materials. Among the insulation is to provide a mineral wool "Tekhnoblok".

"Tekhnoblok" and its types

"Tekhnoblok" - mineral wool plate, which comprises basalt fiber. Used for insulation of buildings and for the installation of layered masonry or a decorative finish of facades. Thanks to special additives "Tekhnoblok" has the best performance compared to conventional mineral wool. Its advantages are the following:

1. Absorbs moisture.
2. Burns.
3. High density.
4. Provides increased durability.
5. Breathable.
6. Has a long service life.
7. Simple installation.
8. Is a good thermal and sound insulator.
9. Not afraid of rodents and insects.

Among the shortcomings can be identified only relatively high cost. Depending on the density there are three types of material:

• "Tekhnoblok Standard". The technical characteristics of this type depend on its density, which is 40-50 kg/m³. This figure allows the material to shrink to 10% of the volume under load.
• "Optima". Has a density of 60 kg/m³. Compressed under load, only 8%. Has the ability to completely restore its form.
• "Tekhnoblok Prof". Shrinks only 5% of the volume. It has a density of 65-70 kg/m³.

"Tekhnoblok Standard": specifications

The Insulation of this type is produced in blocks the size of 100х50х3 cm and 120х60х20 see Despite the large thickness, the material is easily cut using scissors or knife. This greatly simplifies the installation process. "Tekhnoblok Standard", specifications of which comply with the GOST standards, is a good insulator and absorber of noise. It is resistant to chemicals, moisture, microorganisms and rodents.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

The Material does not burn, but can withstand a temperature range from minus 60 to plus 200 degrees. The service life reaches 80 years. "Tekhnoblok Standard", specifications of which persist throughout the lifespan, can be used in various fields:

1. In the construction of housing and industrial buildings.
2. As a Central layer of the layered masonry.
3. As the insulation of timber frame walls, facades, basements, attics, garages and so on.

The Use of "Tekhnoblok"

Insulation "Tekhnoblok Standard" placed on the cleaned surface. Mounted on the wall frame, in which is placed insulation. Previously on the mineral wool Mat and the wall is applied to the adhesive composition. After drying, the solution heaters are additionally attached with dowels at the rate of 5-8 units per 1 m². On top of "Tekhnoblok" rolled waterproofing to protect from moisture. It is possible to apply the plaster.