Mastic polymer bitumen: features advanced materials

Date:

2018-03-29 03:02:12

Views:

714

Rating:

1Like 0Dislike

Share:

Table of contents:

The Bitumen-derived product obtained by refining oil. An indispensable material in many areas, but most often used for waterproofing of building objects, for the laying and repair of roads. Compare it in importance is possible with materials such as rubber, glue or cement. Technical features of bitumen allow you to work with him while maintaining it in a heated condition. This drawback had to adapt up to that time, how did the mastic polymer bitumen - a prototype liquid rubber.

What's New polymer

Polymeric materials have become a new stage of development in the life of many technologies and materials and even industries. With the new formula, the bitumen not only eliminate your disadvantage, but also improved the quality. Used bitumen-polymer mastic for waterproofing was now used for partial isolation from power, noise and temperature. bitumen-polymer masticThe new generation of bitumen there are new technical possibilities:

  • Working with bitumen does not require training.
  • Does Not require heating and operate fire, which, respectively, reduces hazardous working conditions.
  • The Application in three ways.
  • Simplified the repair of old bitumen.

No less important, and quality indicators:

  • Fast drying.
  • Uniform drying without cracking and stains.
  • Good fluidity and filling of small cracks.
  • Resistance to UV rays.
  • High ductility (the higher the plasticity, the less the possibility of cracking, chipping, and depressurization).
  • Low bandwidth sounds, and temperature.
  • Possibility to use any texture and the form of any complexity evenly.

Technological features of use and storage

Modern mastic polymer bitumen is produced by adding polymer modifier, synthetic rubber, mineral fillers, solvents that support its paste, i.e. a working condition. Applied mastic does not require any preparation except for mixing to obtain a homogeneous consistency. Preparation requires only the treated surface, which must be stripped of old materials and degreased.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Mastic may be applied to the surface in two ways: by spraying or manually. For complex shapes and large areas of mastic polymer bitumen is applied with special equipment under pressure without air. This gives you the opportunity to receive a seamless monolithic structure of the coating and provide uniform drying. But if necessary, repair of old bitumen coatings or treatment of small areas of the polymer paste can be applied to the surface with a brush or rubber spatula.

Descriptions

Bitumen-polymer mastic for waterproofing

Corresponds to the bitumen-polymer mastic GOST, and meets the requirements of international standards. According to GOST, it has its own marking, using abbreviations and numbers indicate relevant characteristics and define the indicators:

  • The softening Temperature.
  • Penetration-the depth of penetration of a standard needle into the mass.
  • Ductility-the property of bitumen to stretch the thread.

All of mastic oil-based have in marking the first two letters of bn. The third letter indicates the category in the direction of types of work: (roofing), D (road), And (insul). Further, the marking consists of a numerical key temperature XX/XX. For each application uses its own performance.

  • Road: BND XX/XX – during penetration.
  • Roof: BNK XX/XX - the numerator indicates the softening temperature and the denominator is the temperature penetration.
  • Insulation: BNI IV or V.
  • Mastic asphalt roofing hot can be made with the addition of herbicides or antiseptic. Figure - temperature heat resistance of 5 hours, the next letter indicates the content of these elements: MBK-G - XX A.

Popular grade of bitumen for outdoor work

bitumen polymer mastic GOST

Types of bitumen, the most popular and frequently used in their classes, have an individual name, for example, “Slavyanka” or “TECHNONICOL”.

Bitumen-polymer mastic “Slavyanka” refers to a category of insulating materials. Proven versatile features for a wide range of applications, undemanding in preparation for work. One-component composition after opening immediately applied to the cleaned surface. The setting time of 8-12 hours, after which the coating protects against electrochemical effects of water in any state (atmospheric, capillary, ground, direct contact). Frozen monolith has a high coefficient of adhesion surfaces: sand-ready mix concrete, metal structures, wood, asbestos cement and silicate mixtures, as well as all derivatives of these materials. To harden the coating can be reinforced.

To Use the "Slav" for the interior is strictly prohibited!

Generic brand for interior work

A Completely different purpose has a bitumen-polymer mastic “TECHNONICOL”. Made of water-based, it is designed to workin the inner rooms. The principle of preparation and method of application mastic is also convenient and simple. One component of the mixture being heated if necessary, is diluted with latex primer and stirred to a uniform consistency. Used for roofing, waterproofing of internal premises (bathrooms, swimming pools, basements, balconies, etc.). Also to harden the layer can be reinforced.bitumen polymer mastic Slavyanka

Reinforcement bitumen

To give greater durability used reinforcement of the bitumen, especially with regard to the nodes, ligaments, paired contacting parts. For these purposes use the fiberglass of different diameter and size of the cells. An important feature is that the grid is not the netting, and automated weldings. But the reinforcement, increasing strength, reduces ductility, and it should be done only in justified cases.bitumen polymer mastic TekhnoNikol

The mastic polymer bitumen is manufactured strictly in accordance with the Standards. Products undergo quality control at all production stages and provides Russian and European (ISO) certificates.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/16263-masc-ka-pal-merna-b-tumnaya-asabl-vasc-suchasnyh-materyyala.html

DE: https://tostpost.com/de/gem-tlichkeit/16270-dichtstoff-polymer-bitumen-eigenschaften-von-modernen-materialien.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/16278-la-alm-ciga-polim-ricas-bitumnaya-caracter-sticas-de-los-materiales-mo.html

KK: https://tostpost.com/kk/domashniy-uyut/16264-mastika-polimerl--bitumdy-erekshel-kter-zh-ne-az-rg-zaman-y-materialda.html

PL: https://tostpost.com/pl/komfort-domu/16239-pasta-zapraw-polimerowo-bitumiczna-cechy-nowoczesnych-materia-w.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/16238-m-stique-polimerno-betume-caracter-sticas-de-materiais-avan-ados.html

TR: https://tostpost.com/tr/domashniy-uyut/16269-sak-z-polimer-bit-m-zellikleri-modern-malzeme.html

UK: https://tostpost.com/uk/domashn-y-zatishok/16259-mastika-pol-merno-b-tumna-osoblivost-suchasnih-mater-al-v.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Heating boiler for solid fuels: what is it?

Heating boiler for solid fuels: what is it?

heating Boiler for solid fuels is becoming a very useful device in the case where there is no possibility of connecting to the gas line. Such devices work with wood, briquettes or coal. The fuel put into the boiler, is gradually c...

Manifold heating: how to make the house warmer

Manifold heating: how to make the house warmer

the Manifold heating is the most important device used in any boiler or heating system. The main function of the fixture is the distribution of coolant flows.the Device increases the efficiency of the heating system. The main purp...

How is motoliberty their hands: instructions for making

How is motoliberty their hands: instructions for making

of Course, work even on small plots can be very exhausting for a man, not only physically but also mentally. Really, to wield a shovel every day from morning to evening – not the most interesting case. But what if in the win...

Refrigerator LG GA E409SERA: description, features and reviews

Refrigerator LG GA E409SERA: description, features and reviews

Refrigerator – one of the most important elements in kitchen appliances. It depends on the quality of your products and, consequently, your health. Therefore, making such an important purchase, it is necessary to study in de...

Hazelnut: planting and care. Planting of hazelnuts in the autumn

Hazelnut: planting and care. Planting of hazelnuts in the autumn

Among the horticultural crops of the species of nut, the hazelnut is the king. The honorary title he received for high yield. Hazelnut as a cultivated plant was grown from ancient times. This is indicated by archaeological finds.H...

Tubing pipe: basic concepts

Tubing pipe: basic concepts

pump compressor Pipe (or in short of tubing) are widely used in the oil and gas industry: in oil and gas wells, lowering of lifting and repair works, transportation of various liquids and gaseous substances. These products operate...