Heating PLEN: reviews. Heating system PLEN

The Process of heating by infrared radiation is due to its physical properties. Basically such as reflectivity, absorption ability of different surfaces and substances, transmittance, dispersion, etc. for Example, air consists of molecules of nitrogen and oxygen, almost does not absorb, and partially scatters and easy to pass such radiation. Human body, like any object of the room, for the most part absorbs from this part of the spectrum of electromagnetic waves, only partially reflect them.

The Principle of heating using infrared radiation

In the process of infrared radiation electromagnetic energy into heat transformirovalsya. Thus, any objects in the room, heated, give off this energy to the air, causing it to heat.

With infrared heating conversion flows in order to reduce its speed, and the rays falling on the human body, stimulate its peripheral circulatory system, which causes thermal comfort for 3-4 seconds earlier than conventional heating convectors. Which is the most useful part of the solar spectrum, the emitted beams to compensate for “Sunny famine”.

That is, any heated object is a source of infrared radiation. The wavelength of this radiation determines the molecular composition and the temperature of the object. This depends on the amount of received energy. Another example of such heating can serve as the Sun, warming our Land. It is the most powerful source in the Solar system. The sun – its natural heater. Everything living on Earth is vital to the heat of the sun, and humanity is no exception. Infrared rays of the sun are billions of kilometers in space and their losses are minimal. Any encountered on their way to the surface heats up by absorbing the energy of the rays and turning into heat.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

The basics of infrared heating

The Most comfortable for people are long-wave. Since the range of the infrared rays is large enough, scientists have broken it down into three sub-bands:

• Short – it is adjacent to the visible portion of light.
• Average.
• Dress.

Most hot objects radiate more short wave. The warmer the object – the shorter the wavelength.

Heating PLEN is an alternative to the street the heating system, which is used by nature. Mounted on the ceiling system PLEN allows to obtain thermal comfort in the same way that it gives all living things the Sun. Long-wave radiant energy emitted by the heating elements, heats objects, floors, machines that, in turn, accumulate it and then give to the environment. The humidity is natural.

That is, the meaning is that in order to keep the room became warm, it is not necessary to heat the air.

What is the PLEN and how does it work?

PLEN stands for "film radiant electric heater". It consists of resistive radiating element located between the polymer films, infrared heating system. The basis of the system PLEN – the interaction of infrared radiation with matter and various physical properties.

Resistive element is called because consists of several layers of resistive circuits (resistors). When PLEN heating is connected to the electric network, through the resistor begins to pass electric current, and they heat up to a sufficiently high temperature – 40-50°C. the material of the resistors, is able to emit infrared radiation. And it was on the heating of the room, before tucking PLEN, from the ceiling, walls, floor or other surface enclose the foil which reflects directional beams.

At the time of the heating resistor film goes less than 10% of the time required to warm up the entire room. Within 1-2 hours, the temperature increases by 10 degrees – this is the minimum interval. Then the heating system PLEN continues to maintain the desired temperature and turns on periodically for 3-15 minutes during each hour.

Even the best heater will not work properly if they are not managed properly. Heating system PLEN, as a rule, consists of a heater and control unit. Setting the desired temperature is a thermostat. Set the room thermostat controls the surrounding temperature using the integrated temperature sensor and controls a special unit, according to identified the difference between actual and specified values.

In addition, if the room is insulated as it should, PLEN consumes less energy.

Application and install PLEN

Special restrictions on the use of PLEN no. It is used as a primary and as additional heating. Possible installation on floor, walls, ceiling. When used as a primary heating heating PLEN, user reviews confirm this, enough to cover only 75% of the ceiling or the floor. They heated apartments, cottages, industrial premises, offices, balconies, etc.

The Greatest efficiency PLEN shows in places where there is a maximum breathability.

PLEN for private homes

Infrared heaters are suitable not only for new constructions but also for renovation of existing ones. Selecting heating PLEN will be able to save significantly already at the design stage. Don't have to build a special boiler or allocating one of the rooms of the house. Also have to consider the scheme of storage of fuel, whether coal, wood or diesel fuel. The house will never smell of burned coal or diesel fuel. In addition, the exterior of the house will not be spoiled by protruding from the walls of radiators and pipes that are inherent to traditional heating. And most importantly – infrared heaters in the minimum term will remove moisture, maintaining a comfortable temperature in every single space.

Institutions

The Most acceptable heating system for designed for children premises is plain. Heating of this type fireproof and convenient. It is not subject to mandatory certification, there is no vitaniya of dust in the air, convection drafts and creates the effect of a “floor”, and therefore protects children from hypothermia.

This system is resistant to low temperatures – works well even with -60^OC. it Typically closes around 70-80% of the ceiling.

Installation Requirement PLEN

• Mechanical effects on the device.
• Building (or room) shall meet the requirements of the building regulations in terms of thermal insulation.
• Installation should be performed only by a qualified electrician.
• It is Forbidden to lengthen or shorten PLEN.
• It is Forbidden to exploit rolled into a coil device.
• It is Forbidden to disassemble the heating film PLEN.
• The Surface should be even and cleaned from dust and dirt.
• Invalid PLEN contact with aggressive chemical environments.
• To install only when a dead network.
• Single-phase input use only if total power to 5 kW. When more power should be applied to three-phase input.

PLEN heating: features and benefits

• Assembly and disassembly for reinstallation at another location minimally simple.
• PLEN equipped with fire safety system.
• Works Silently and does not create unpleasant vibrations.
• At least heating PLEN works to 25 years, if it followed the rules of its installation.
• Do Not burn oxygen and does not affect the humidity of the room.
• Does Not require any maintenance.
• Heating Costs below 70% if to compare this heating with the other.
• Payback period of the system for 2 years, including the cost of its installation.
• Tolerate the voltage drops.
• Short warm-up time after turning on of the sexes.
• Environmentally friendly and takes up almost no space in the room;
• Heating PLEN has significantly lower than those of household appliances, electromagnetic field, within a regulatory background.
• Automated and easily customizable.
• Standby mode of about +10C.
• Easily with any non-metallic materials.
• Radiation is good for the immune system and also ionizes the air in the room.
• Because the floor is always warm, the system is a preventive against colds.

The Impact on human health

Research Conducted by scientists found that the human body the most benefits of far infrared radiation, and in particular adjacent to the middle sub-bands of the part – it «rays of life”, the wavelength of which is from 5 to 15 microns. Just in this period and there is an infrared heating PLEN. In the same range is the thermal radiation of the human body. Back in the sixties by Japanese scientists on the OS...