Corrugation toilet: types, appointment, installation

Reliable joint of the toilet bowl with the sewer pipe will save you from many unpleasant moments, such as the seepage of sewage, odor and pollution of the floor of the toilet room. But what to do when the output of the plumbers knee is not aligned with the inlet pipe, and the usual eccentric or extensions to solve the issue not work? In this case, come to the aid of universal coupling corrugations.

What is corrugation toilet?

The overflow Valve of the class to which the corrugation is a transition device from the toilet to the sewage, strength and ability to stretch. In form it is similar to an accordion, are made from polymers such as polyethylene, polypropylene or polyurethane. The product has resistant properties to maintain its integrity under the conditions of stretching, heat within acceptable limits.

Despite its apparent fragility, ribbing is fairly strong detail. This is due to the presence of stiffeners, due to which it can stretch. The corrugations are of different sizes and allow for the articulation of the plumbing, even if the plane of the entrance of sewer channel is deployed at 90 and sometimes 180 degrees from the drain outlet of the toilet. The only condition for obtaining a large bending of the connector is to prevent significant sagging.

Applications

There are several cases when the connection of the toilet gofrey advisable or the other option at all possible:

1. The Difference of the editions of the Cup and of the connecting socket of the sewer. This is due to the presence of many toilets with its design features. Standard connectors and may not be suitable, and with the help of bag, thanks to its flexibility, the issue can be resolved.
2. The position of the bowl has a certain amount of offset from the sewer exit. This refers to the case where to do the usual eccentric and impossible. Causes of mismatch may be different, but if this happens – corrugation toilet irreplaceable material.
   
3. The Toilet is connected temporarily, it must sometimes move, for example, for repairs in the dressing room. To be able to use the plumbing and do not disconnect it periodically will help flexible adapter.

Types of corrugations

In the market there are different versions of products for the comfortable work with all types of toilets. The connecting drainage fittings can be:

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

• Small and large sizes, ranging from 21 and ending 50 centimeters.
• The Product with a soft structure, made of plastic without the use of reinforcement, with thin walls. They are more flexible, can be positioned corrugations to seat in any desired position, but have low strength.
• Reinforced connector inside the walls which contains the fiber or mesh from stainless steel wire. A more rigid construction allows to vary in a smaller range of deviations of the joints, but it is a reliable product that is very durable and usually less slack.
• With different angle of withdrawal of the socket, which facilitates installation of the toilet goreu. So, along with direct sockets, there are models of sleeves, which it leaves at an angle of 45 degrees or even 90 degrees.

Device corrugation, the dimensions

The Technical solution of the corrugations is very simple, despite the versatility of the products. They consist of these main elements:

• Bell, which is inserted into the outlet knee of the toilet.
• Shirred area, having the ability to lengthen and through which the connecting member has flexibility.
• Pipe inserted into the bell of the sewer pipe.
• Sealing rubber bands that perform the role of sealing elements filling the space between the connector and fitment.

The First three elements are a single unit – the product is made of plastic. The rubber seal is removable, they can be replaced if necessary. Sometimes, instead of the sealing rubber elements in the plastic sleeve provides a non-removable seals. Such connectors are extremely unreliable and do not allow in some cases to obtain a sealed joint.

The Size of the corrugations to the toilet in the technical data specified for compressed of their condition. For example, the length of 21.2 cm suggests that the connecting sleeve you can safely stretch up to 32 inches. Buying a product with a size of 28.5 cm, you can expect to limit the length of half a meter. But choosing a connector for a specific task, we must note that the joint in the tension can lead to difficulty reliable and tight fixation, as well as slipping during the operation.

How to install corrugations on the toilet?

The Flute is one of the fewelements, which in some cases can be installed without removing the toilet from the floor. This is useful if you Unscrew the fastening screws legs plumbing is not possible. The connection is carried out in the following order:

1. On the nozzle seat in the place of donning the sleeves put a layer of sealant.
2. Pull the socket of the flexible hose to the drain output of the toilet bowl and give time to harden the sealant.
3. Put a layer of sealant on the outer wall around the circumference of the socket sewer pipe.
4. Insert the hose connector into the sewer and allow time for hardening the sealant.
5. Attach the toilet to the floor and laid out the corrugations so that it does not SAG, if necessary, placing him support in the form of bars and similar items.
6. Pour in the toilet a few buckets of water and checking for leaks from the joints.

Conclusion

Of Course, the corrugations installing toilet plumbing, which is not new, all pipes and sockets should be thoroughly cleaned of dirt and raids, and apply the sealant on the dry surface only. Of course, it is always better to hire a professional locksmith who efficiently install equipment and provide warranty on their work.